When login screen appears my keybord doesn't work so i can't type my username and password on my macbook
when login screen appears my keybord doesn't work so i can't type my username and password on my macbook
I had my meeting with the Genius bar tech support. He reviewed all of the Apple Care history I have accumultaed over the last 4 weeks. He looked at my system and couldnt find any software issues. That led him to speculate it may be a hardware issue. After explaining that I spent over $5000 for my complete set up, I would not be happy with a repair on a brand new unit. He spoke to store manager and they agreed to replace the defective MBP.
I have completed my migration using Set Up Assistant and ethernet connection from old MBP to new MBP and it went smoothly. I migrated 324Gb in under 4 hours! Over night I created a complete backup using Time Capsule; again with an ethernet connection, and it took under 7 hours.
Everything is operating as normal.
Hopefully, this issue is behind me.
Similar Messages
-
How can i clear the usernames and passwords history from all login websites?
how can i clear the usernames and passwords in the log in history of the websites? example when i want to login to my facebook i always type first letter of my e-mail and it comes with the passwords because before i put remember my password, and in other websites so, i just need to delete all this login history and it's not working from the clear everything !!! :S any idea please !! thanks in advance :)
See:
http://kb.mozillazine.org/Deleting_autocomplete_entries
http://kb.mozillazine.org/Password_Manager -
Help !! i can't use this username and password to login
i used your "password finder" tool to find my username and pwd. i use the username / pwd that you sent to my mail box to login on the following page:
http://www.oracle.com/admin/account/index.html
system prompted Invalid login.Thank you for requesting your account information.
Please use the following Username and Password to access the following services:
Oracle.com... http://www.oracle.com
Oracle Technology Network... http://technet.oracle.com
Oracle Applications Network... http://appsnet.oracle.com
Oracle E-Business Network... http://www.oracle.com/ebusinessnetwork
Oracle Learning Network... http://www.oracle.com/education/oln
Username: [email protected] -
I downloaded iOS 7 to my iPhone. Now everything is lighter making it difficult to see. The words (letters) are smaller and the type is lighter.
Questions:
Is there anyway to change the type to display more distinctly as it did on the older version?
If not, is there anyway to return to the older version?
Also, on my weather app, my city name keeps changing to Southwood, SC. Sometimes I have both but usually the Southwood takes over my home city selection. I don't know where Southwood, SC is located and do not want it on my phone.
Why is the app changing my selected home city to Southwood, SC?
How to I stop it from changing?
Also, the top city on the weather app will not allow you to delete it. Why is this? The other additions can be deleted.Hi Jean4438,
Welcome to the Support Communities!
I made the changes below to my iPhone and have personally been delighted with how much easier everything is to read. Hopefully they will help you as well.
Large and bold text - iPhone User Guide
http://help.apple.com/iphone/7/#/iph73b89c6
Here is the information for making changes to the Weather app:
In most situations, you will swipe from right to left to see the Delete button.
Weather - iPhone User Guide
http://help.apple.com/iphone/7/#/iph1ac0b35f
Although this isn't your specific iPhone model, the tips and tricks in this new document may help you get started with iOS 7:
Apple - iPhone - iPhone 4s Tips and Tricks
http://www.apple.com/iphone-4s/tips/
I hope this information helps ....
Have a great day!
- Judy -
Can I save my username and password to login to a wifi network on a pop-up window?
At my college, we have two ways to loging to the wifi. Either directly on the browser, or an annoying pop up window comes up. What I want to do is either stop the pop up window entirely, (preferrable) or save my password to the pop up window.
Also, this pop up window only seems to occur for me. None of my friends get it.reset at iforgot.apple.com
Peace, Clyde -
Have you tried simply using the REMOTE_USER environment variable which is accessible via CGI by the following:
$customer = $ENV{"REMOTE_USER"};
Once you have that (which will correspond to the uid attribute in your LDAP server) you can do a query for the other things. The password shohuld not be required to lookupu other info since you know at this point that the are already authenticated. -
I upgrade to mountain lion and my cannon MX310 scanner doesn´t work. What can I do?
Download and install the MX310 scanner driver and MP Navigator from Canon.
http://support-au.canon.com.au/P/search?model=PIXMA+MX310&menu=download&filter=0 &tagname=g_os&g_os=Mac%20OS%20X%20v10%2E8 -
I have imported photos from my camera to iphotos, cool it works great.
But why when I want to email the pics, I get an error message that states
my username and password arent recognized??In the iPhoto preferences ==> accounts delete the account and renter it
Or better yet IMHO set Apple mail as your email client in the iPhoto preferences rather than iPhoto
LN -
My username and password get erased when I try to remote log in to my corporate email account
Hi Folks,
When I try to log in remotely to my corporate (Outlook) email account, the correct username and password are erased once I hit 'enter' and I don't get in. I bought the Toshiba laptop a couple of weeks ago and I could get in for a while, but then I couldn't.
I'd appreciate any suggestions,
Thanks,
PTry going to this link and see if the instructions there help.
https://www.google.com/accounts/DisplayUnlockCaptcha
B-rock -
SPNego - Login Screen Appears for IE Browser in Some machines.
Hi,
We've done the SPNEGO Implementation for Portal SSO.
All the settings related to KDC in AD server, Portal WAS and IE browser client settings have been done.
In most of the machines with WINDOWS XP SP2, portal login screen is not getting appeared in IE and so SPNEGO is working fine.
But in few machines with WINDOWS XP SP2, portal login screen appears although the IE client setting like adding the portal url in Security Local Intranet, enabling integrated windows authothentication, enabling automatic logon in intranet zone is done.
We have even followed the SAP Note 934138 and installed Microsoft hotfix KB899587, but still some machines with Windows XP SP2 are facing this issue.
Thanks,
Regards,
Aditya MetukulHI Aditya,
This might be due to proxy settings. Go to your IE -> Tools-> Internet Options -> Connections ->LAN settings -> If you are using Proxy settings then go to Advanced tab -> and add the portal URL under "Do not use Proxy servers for address beninging with".
Regards
Deb
Edited by: Debasish Sarkar on Dec 8, 2008 7:20 PM -
Keep trying to access my Hulu plus Account and it keeps telling me it's not available. It did that yesterday and then the login screen appeared (not sure how it happened) I logged in and it worked. Now today, same unavailable message comes up. Help !!!
Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
[SOLVED] Black screen halfway through boot before login screen appears
I originally installed my Arch Linux 64 system on a quad core intel cpu with 4GB RAM and a Nvidia 9600 GT graphics card. Arch is installed on 2 500 GB HDD running on software RAID and LVM. A few months ago I decided I wanted to upgrade my machine to an i7-2600K with 8 GB RAM and a Nvidia 580 GTX graphics card. Since I was using pure software RAID I knew that I could just reuse my installation. So I popped in the drives into the new machine and glory glory Arch booted just fine. One thing I notied though and this has been bothered me since then. On my old machine I could see the whole boot process from start to finish. On my new machine I only see the first few seconds and then a black screen for few seconds and then I get the login screen (KDM in my case). Now I'm running a pure systemd system and I can see the boot process until
[ok] started loading random ...
and then the black screen sets in. Why does this happen? Why can't see if udev, samba etc. start correctly anymore?
Last edited by fettouhi (2012-10-11 21:46:56)DSpider wrote:Then remove Nouveau completely, undo any changes to mkinitcpio.conf, and re-generate your initramfs.
I don't have the nouveau driver installed at all. But I finally got rid of the black screen. I simply added nomodeset to the kernel parameters in grub and now everything ass before. -
When i went onto my iPad this morning it was completely fine and working but once i took it to college with me the battery had ran out, so later on tonight i plugged my charger in and left it charging for about half an hour, when i went to go back up onto it was just a black screen and every so often when i pressed the power button it would flash blue for a split second then be blacked out again...
So i had a look on this community to see if there was any solutions that could help and i found a case similar to mine so i tried to reset in hopes that it worked but it never did. I know that the iPad itself is working as i managed to unlock my iPad when putting in my passcode and i was able to get notification through as well, but after the reset i saw the apple logo appeared and it flashed a few times and i could see the setup on the screen to set it up as a new iPad.
I don't know how or why the screen will not work properly, so any help would be greatHello there, Courtney_May.
The following Knowledge Base article addresses intermittent display issues on iPhone, but is applicable to your iPad as well:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.
Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G. -
ITunes 10.4 full screen with Win7-64bit doesn't work correctly.
iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.
Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card
Maybe you are looking for
-
I have two graphics workers on osx 8. They are both complaining that their files are changing label colors on it own. Any idea what could cause this?
-
Need some help with the following: By mistake posted credit memo in MIRO instead of posting invoice in MIRO. Then reversed the credit memo by going in MR8M. The reversal of credit memo posted an invoice in MIRO. Now we want to post the MIRO invoice
-
Error in installation in CS5.5 master collection
Error message is found below It caused some of the icons of application like media encoder, extendscript toolkit could not be displayed normally. Exit Code: 6 -------------------------------------- Summary -------------------------------------- - 0 f
-
Query takes very long time and analyze table hangs
Hi One of the oracle query taking very long time (ie more than a day) and affecting business requirment of getting the report in time. I tried to analyze the table with compute statistics option, however it hangs/runs forever on one of the huge table
-
HT1338 install linux OS on Mac mini with USB flash
I have Mac Mini (2005) with RAM 1 Gb, HDD ATA 160Gb (Upgrade new hard disk). Now, i want install linux os on Mac mini with USB flash, but can't do it. I not yet user MAC os, before (i only use iphone and ipad). :d Help me do it! Thanks