When making a call NO DIAL TONE

when making a call NO DIAL TONE, and can't here the other person talking. Only
if pressing SPEAKER or when using the iPhone Stereo Headset.(SILENT BOTON IS OFF) please help!!

Hello LA1, first off since iphone is a Cellular Phone there is no dial tone, as far as no sound though the earpiece on your iphone, try pluging/unpluging the headset from the jack on top of the iphone a few times, that usually clears up that problem.
Hope this helps.

Similar Messages

  • Iphine4 crackling when making a call

    My Iphone 4 started crackling when making a call, all the posts seem to suggest it was caused by water damage and said I should dump my phone and get a new one. As a last resort I took it to a small repair shim in Montrose Scotlanc and the tech replaced the earpiece cost £20:00 it now works fine and saved me loads

    Hello LA1, first off since iphone is a Cellular Phone there is no dial tone, as far as no sound though the earpiece on your iphone, try pluging/unpluging the headset from the jack on top of the iphone a few times, that usually clears up that problem.
    Hope this helps.

  • On IPhone 5S, when making cell calls, it connects to FaceTime.

    On IPhone 5S, IOS 7.1.2, when making cell calls, it connects to FaceTime.

    Hey there siteshop,
    It sounds like you are still hearing the phone line ringing even after the person you call answers the line. I would try the troubleshooting outlined in this article:
    iPhone: Troubleshooting issues making or receiving calls
    https://support.apple.com/kb/TS3406
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Ensure that your software is up to date:
    Check for a carrier settings update.
    Check for an iOS software update.
    Note: Some updates may require a Wi-Fi connection.
    If the iPhone has a SIM card, reseat the SIM card.
    If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
    Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
    Try to make or receive calls in another location.
    Attempt to isolate to one network band:
    If you're having the issue on LTE, disable LTE, if possible, and try again.
    If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
    Contact the carrier to check the following:
    Your account is properly configured to use the specific iPhone that has the issue.
    There are no localized service outages.
    Your account doesn't have a billing-related block.
    Your calls don't have errors on the carrier system.
    Restore the phone as new.
    If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Iphone 4 the mike does not work when making a call.  it does work with speaker phone and face time

    Just activated new Iphone 4 and the mike does not work when making a call.  it does work with speaker phone and face time. Any known fixes?

    My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often.  I called her iphone 4 at home from where I work 20 miles away on my iphone 5.  With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries.  This is a 10% sucess rate!!  I also could listen in real time from the wired work phone and the wired home phone.  She turned off 3G mode and it went to "O" mode at  the top left of the screen after the ATT.  In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time.  I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network.  If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring.  If the ring tone does not change after the 4th ring you get voice mail.  If the calling party does not leave a voice message there is never a missed call displayed on the iphone.  If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication. 
    This appears to be related to the time of day and the ATT tower that the receiving caller is using.  Tried other towers and it works in 3G mode 10 times out of 10 tries.  Apple replaced the first iphone 4 with a new phone, no improvement.  ATT replaced the SIM card and no improvement.  ATT so far is clue less.  This has been going on every since we got the new iphones which is 4 months.  The ATT web site also describes this same problem from several years ago.  Has anyone got better information?
    Thanks

  • HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls.   please help as I use it for conference calls

    Hi   I use my phone for conference calls and use the microphone jack to connect to speakers.      It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.   

    Happy to have been of help. Hope all goes smoothly.
    BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
    https://discussions.apple.com/static/apple/tutorial/mark.html
    and
    https://discussions.apple.com/static/apple/tutorial/reputation.html
    Regards.

  • Unable to be heard when making a call?

    I am unable to be heard when making a call, but can be heard when using speaker or headphone

    There may be some issue with your mic. I'd go to an Apple store

  • Just uploaded IOS 8 and now can't hear anyone when making a call. If put speaker on then I can hear! Any advice?

    Just uploaded IOS 8 and now can't hear anyone when making a call. If put speaker on then I can hear! Any advice?

    I just tried to help another guy in another discussin with similar problems.
    Headset input is not working
    I would suggest a iPhone restore and fresh load from Backup... but it is no guarantee.
    jl

  • TS4079 Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new numb

    Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
    I`ve tried restarting, rebooting, nothing works.
    The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile number

    Ecuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/.  . The more people that bring this to their attention the faster it will get fixed

  • TS4185 Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there?

    Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
    There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFP

    I suspect it has to do with not having a more current operating system
    Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
    What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
    http://roaringapps.com/apps:table
    Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
    A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
    Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
    Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
    Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
    So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
    Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
    But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
    Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are.

  • When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... please help

    When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... than I have to wait 2 - 3 minutes and call again.
    please help

    Has nothing to do with the SIM or master reset.  This has been done to my phone.  The SIM once and the factory reset many times over.  You all just sold us a bad piece of equipment and have us by the tail with our contracts so none of us can get a new phone without paying full price or re-upping our contract.  I just got off the phone last night with your high up tech people (you know, the hidden number we get once we tear into your support people enough), they went into my phone again and still didn't find anything wrong.  I about got fired from my job for not getting my calls and texts.  The BBB has now been contacted, and I feel your end should shore this up for all of us!

  • I phone 3 just shuts down after 3 to 4 mins when making a call large apple logo apears on screen the only way to reboot is to charge charge it although there is enough battery.any answers thanks

    i phone 3 shuts down after 3 to 4 mins when making a call - then large apple sign apeers  phone frozen - only way to unlock is to re charge although there is enough battery - any answers would be welcome.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    But... This can happen if the phone has been Hacked / Jailbroken / Modified...
    If this is the case... Then... None of the above will necessarily work...
    And...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

  • Iphone shuts down when making a call

    Please help my iphone shuts down when making a call restored and set to new phone but still shuts down after 2 to 3 mins  HELP

    I'm having exactly the same issue with my iphone, and same specs. It's a new work phone so discussed with IT manager. She advised returning it so it could be sent back for repair. Would be interested if you have heard of any other fixes as not keen to be without the phone, although that needs to weighed against the fact it randomly shuts down when a call comes in!

  • When making a call if you touch the phone with your face, you touch the speaker or mute button

    When making a call if you do not roll the screen to home if you have the phone to close to your face it touches the mute or speaker buttons. Is there a setting in the phone that will automatically roll the screen so if you touch with your face it does not happen?

    There is a sensor that disables the screen when you hold the phone to your face. If you didn't remove the plastic film from the front of the phone, or you have a case on the phone, it can block that sensor and you will encounter the symptom you describe. So try removing any case and check for the shipping film (which is hard to see).

  • IPhone  no longer plays music through headphones or on speaker but will work when making a call on both headphones and speaker.

    my phone will no longer play music through headphones or on speaker but will work when making a call on both headphones and speaker. Also when I plug in my iPhone to a jack that uses a power amp like external speakers it works fine. I have no idea whats going on i've restored it twice and still nothing.

    did you update your phone?

  • HT201401 Can't hear when making a call

    I can't seem to be able to hear when making a call or receiving one

    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630

Maybe you are looking for

  • ADOBE INDESIGN CS6 DESIGN STANDARD WILL NOT INSTALL ..SCREEN SHOWS UP FOR A SECOND AND DISAPPEARS

    there is a red folder that says "install CS6" and when i double click, it appears for a second " initializing installer" but then disappears and i get nothing...help??

  • OSB Monitoring with email alerts

    Hi All, I am using OSB to virtualize a business service. The service basically receives feed from external party using one-way messaging pattern. I want to raise an alert at the OSB proxy layer if I do not receive any message from the third party for

  • EMM MDF Wizard

    I am testing the menu definition file and it could be very userful to give some access to a user that doesn't know how to configure a cisco router. The only think that I am having difficulty is with the wizard. I got the question that appear correclt

  • Converting Super8 Movies to .avi and xfr to my Mac via a 16 Gb Flash memory

    I want to use a commercial service to convert some old Super8 movies to both a playable DVD as well as .avi files that I can Edit. To start, I have a 30-min film on a 7-inch Super 8 reel but am told I may need as much as 8Gb for the entire thing to b

  • BDC error - URI

    Hi peers, while doing bdc upload for vendor using call transaction [xk01] i got an error     No URI addresses are maintained for this address Could anyone give a solution for this error.  Another issue is i am using KRED account group [internal numbe