When making a DVD, some photo's are turned

When trying to put a Slide Show on DVD, some of the pictures are turned sideways or upside down. When viewing the slide Show in Elements 11, the orientation is correct. Once I try to put the slide show on DVD using Elements 11 Premiere, some of them get turned.

Which Elements program are you creating and viewing your slideshow in? There are three Elements programs (Premiere Elements, Photoshop Elements and the Elements Organizer) and at least four different ways to create a slideshow in them.
Your Organizer may display photos as right-side up when they are not. Premiere Elements and Photoshop Elements will display your photos as they actually are.
Also ensure that any photos you use in a DVD slideshow are no larger than 1000x750 pixels in size for optimal performance.

Similar Messages

Diapresentation: some photo's are not there

I use Iphoto 7.1.5. I have a problem with the "diavoorstelling"/ slideshow. Some photo's are not displayed. I checked them but I donot see any difference between the photos that are displayed during the slideshow and the photos that are not. All photos are in the same map and have the same characteristics.
I tried to rebuild , using alt+ cmd , but it doesnot help: als photos are in Iphoto, but only some of them are used in a slideshow of an album that i chosse.
Is it possible that the use of PICASA gives these problems?

When I try to add photos from PhotoStream into my iPhoto Library a message appears asking to view the photo in the library (as if it were already imported).
How exacly are you trying to import from the Photo Stream? Dragging from the stream to the events? Ctrl-clicking or right clicking?
If "Show in Library" does not show the event, then your iPhoto Library may need repairing or rebuilding; try to run the iPhoto Library First Aid Tools, if you have not already done so. See this post by Old Toad on how to do it: Rebuild iPhoto Library Version 11:
Regards
Léonie

I have several users in an exchange environment who cannot email a photo from the iPhone. When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place. How do I remediate this?

I have several users in an exchange environment who cannot email a photo from the iPhone. When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place. How do I remediate this? Not all of the users in our environment have this issue. If the users having this issue, install a secondary email account, Gmail, Hotmail, etc, then they can send through those accounts. Why would the exchange account not be seen to send photos?

Sounds like it worked until the policies associated with the account that are creating the problem were fully pushed down.
Try setting up a new (test) Exhange account and see if it behaves the same way on the phone (after removing the problem account from the phone, of course).

A client gave me he's mini Ipad wifi as a gift.It has all his information:photos, music, contacts, etc.I also took some photos that are in camera roll. I would like to erase everithing and make it totaly mine but don't want to loos my photos and his music

A client gave me he's mini Ipad wifi as a gift.
It has all his information:photos, music, contacts, etc. I also took some photos that are in camera roll. I would like to erase everithing and make it totaly mine but don't want to loose my photos and his music which is very good. How should I do???

Resetting the settings will reset things like the wallpaper to the default. It wont remove the apps or music.
As the previous poster said, the apps and music will be tied to the previous owners Apple ID, you'll need the password to update the apps and remain authorized to play the music.
I would suggest taking your stuff off (the camera pictures) then erasing all content and settings so the iPad is like new. For privacy reasons alone I would erase the device. I realise you want to keep the music, but since you haven't paid for it (it was purchased under someone elses ID) then it isn't yours to keep, you'll need to write down the tracks and purchase them under your ID.

CS Bridge when opening file shows " Some Application Components are missing from Application Directory- Reinstall". Uninstalled with uninstaller, reinstalled from disc. Message continues only in Bridge not in PS. Please help.

CS Bridge when opening file shows " Some Application Components are missing from Application Directory- Reinstall". Uninstalled with uninstaller, reinstalled from disc. Message continues only in Bridge not in PS. Please help.

What version of Bridge and Photoshop and what platform? Mac or Windows? I can point you to a downloadable installer.
If the cdrom was damaged, it may be the problem.
You would uninstall and use the CC/CS Cleaner to remove any remnants before reinstalling.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
I'll be gone for most of the day, but someone should be able to help you if you get stuck.
Gene

When importing my images some of them are missing how do i retrieve them

when importing my images some of them are missing . how do i retreive them ?

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.

HT1583 When burning a DVD of photos and music from iDVD, the photos blur right before the transitions and the music has about 5 second glitches here and there before the music starts again. Is there any way to burn the DVD without this happening?

Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?

Try disabling transitions altogether!
There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
https://en.wikipedia.org/wiki/Compression_artifact
'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
iDVD isn't really condusive to professional levels of control.

HELP! Some photos imported are viewable only as small thumbs

Some photos imported into the library are showing small thumbs only. Others have imported fine, even during the same import. They are not editable (showing dashed squares), they are not transferable via email, printing, or in the finder, and are showing as all black in slideshow. In the finder, the folder (roll name) shows, but not the images inside the folder, and the folder is only 8k in size. Also, when scaling the size of the thumb in the folder (roll) in iphoto the problem images do not scale past a very small size. The info window in iphoto says there are 84 photos at 168 mb. How can I recover these photos?

jr:
Welcome to the Apple Discussions. Where were these photos that you imported into the library, in an older iPhoto Library folder?
Also, open the iPhoto Library folder in the Finder and check the Originals folder. In it should be year folders containing sub folders for each roll in the library. See what size those files are and if you can open them in Preview. DO NOT rename or move them.
Here are some threads regarding similar problems and some possible solutions:
http://www.macosxhints.com/article.php?story=20060129054131465
http://discussions.apple.com/thread.jspa?messageID=1804259#1804259
Good luck.

Why are my photos and videos syncing sideways in my computer? When I email or sync photos they are sideways. I've called apple and they are no help. I can fix the pictures, but the videos are a different story. Please help. I have an HP comp Win 7

My pictures and videos are shown correctly in my phone and when I play videos in itunes they are upright, but the location they are saved on my computer they are side ways. There has got to be a setting somewhere to fix this. Please help.

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

My Aperture 3 library menu shows me that some photos, which are high resolution professional pictures, are less than One Mb file size. Are the full size masters held elsewhere, and if so how do I get to them ? You've guessed I,m a newbie - please help.

In Aperture 3 and using File>Get Info, I'm told that many photos, which are 7+ Mb's are only One Mb or less. Are the full-sized masters held elsewhere, and if so how can I get to them. You've guessed I'm a newbie - just 2 months with Apple and I'm very confused - any advice would be gratefully received.

You should probably have this thread moved to the Aperture Discussion group and you’ll find lots of useful tips in the threads there:
https://discussions.apple.com/community/professional_applications/aperture
Are you looking at these sizes within Aperture using the metadata view or inspecting them outside using the Finder and Show Package Contents?
I am wondering how you are importing the pictures from your camera? When you import from your camera, the right side of your display window will have a lot of options that you can select to grab your images from the camera.
Does your camera shoot RAW+JPEG? If so, you may not be importing them correctly and only picking up the JPEGS. You can import them so they stay together or separate them. The master images are all at the Project Level whereas the views you see in Albums for example are aliases that point back to your Project.
Here’s a good Aperture web site (I have no financial or other interest in this site) to help you using Aperture:
http://aperture.maccreate.com/
This article talks about RAW and JPEG images:
http://aperture.maccreate.com/2011/05/24/matching-raw-files-to-jpeg-pairs-in-ape rture-3/

Some Photo thumbnails are black, selecting them crashes app

Scattered throughout my Photos are dozens of photos with black thumbnails. When I select any of these, the image appears full screen but with the arrow overlay indicating that it's a video (which they aren't). One second later, the Photos app crashes.
I have tried un-syncing and removing all photos from the iphone and then re-syncing. I have tried removing them again, rebuilding my iPhoto library and re-syncing again.
The photos that are giving me problems appear to be perfectly fine in iPhoto.
Image 1 http://cl.ly/4Ry0 Overall Photos navigation
Image 2 http://cl.ly/4S29 Selected image incorrectly shown as a video. Just after this, Photos crashes.

I'm having the exact issue.

Scan lines appear when making a dvd with idvd

Edited footage in FCE...exported to quick time, everything looks fantastic...made a dvd with idvd, and final product shows scan lines, or jagged lines...does anyone know what caused this?

I'm seeing the same thing in some photos but not all and not in video clips...

What PPI/DPI should I use when making a DVD menu in PS?

I am making a movie in HD and am wondering either the PPI or DPI recommended. Thanks!

a13firman wrote:
Sorry to resurrect this but when I burn the menus to a DVD they look sort of fuzzy. Now if the PPI doesn't matter what can I do to increase definition? I used the DVD Presets that PS provides
You are either authoring/ transcoding wrongly or, assuming you refer to subpictures (buttons) looking rough around the edges, see normal behavior for a DVD. This has nothing to do with how the graphics are prepared in PS. In case one it's am ater of chosing the right settings, in case two it's a design limitation of the DVD(Video) specification. If you can tell us, what exactly you do and what program you use, we may be able to provide some tips.
Mylenium

Ghosting when combining interlaced and progressive when making a DVD

Hello,
I have a timeline that has a number of different formats including progressive and interlaced video. When exporting a quicktime the video looks fine. When I pop it into DVD Studio Pro and compress into DVD format I'm getting pretty bad ghosting on some of the video.
How can I get rid of the ghosting effect?

Thank you for your timely answer. I'm in a situation when I cannot recompress all of the content into one format right now. I have spend much time editing this project and I must create a DVD for this due for tomorrow morning.
Are there any other alternatives to make this work?
Can I de-interlance the timeline and then export?
Thanks

How can I keep 16:9-format when making a DVD

I am trying to make a DVD based on 16:9-films made in iMovie. I want to keep full quality in both pictures and sound. But the dv-file comes out in 4:3, not in 16:9. How do I keep the 16:9-format all the way from iMovie to iDVD (I can not go directly from iMovie to iDVD, because I am going too put more than one film on the DVD)? Do I need Quick Time Pro? I am thankful for a clarifying answer...
Mac OS X (10.4.5)

Besides starting with a 16:9 iMovie Project you must choose the "Expert Settings" when exporting to QuickTime.
Choose DV Stream. Double check those settings by clicking the "Options" button. This is where you'll find the aspect ratio for your DV file.

When making a DVD, some photo's are turned

Similar Messages

Maybe you are looking for