When making an outgoing call, it rings once and then says 'Call failed' - any solutions?

I had the same problem!! I had to complain quite a few times to AT&T & found out I had to get the 3G MicroCell device. You also have to pay an extra $20 a month for it! You have to purchase it yourself($200)...which is a bunch of crap too!! But they can research your area & when they finally figure out that it's a bad servise area they will give it to you for FREE!! Now my phone works like it's supposed to!! So check it out!! Good Luck!!

Similar Messages

Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

Perhaps this discussion will help with your issue,
https://discussions.apple.com/message/16502324#16502324

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help. If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
The black dot problem may mean you need to reset your iPod. If that does not help, it may need service by an Apple Authorized Service Provider.
If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
http://www.apple.com/support/ipodtouch/
Message was edited by: EZ Jim
Mac OSX 10.7.3

I am unable to download photos from iPhone 4, SD card and SLR camera to iPad 2 using apple accessories. It worked once and then never again. Any ideas ?

I am unable to download photos from my iphone4 , SD card , SLR camera to my ipad2 using apple accessories , please help , it has worked once and then never again.

Plumchunks-
The only accessory I know of that can be used to transfer photos from a camera or SD card to the iPad, is the Apple Camera Connection Kit. The kit consists of two adapters. One has an SD card socket. The other has a USB connector to connect directly to the camera.
I do not think you can transfer photos from the iPhone to the iPad unless you first transfer them to a computer. If you then transfer the photos to an SD card, they must have eight character names plus suffix and be stored in a DCIM folder, just as if they came from a camera.
One thing you can try is to reboot the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Rebootting will not hurt anything and sometimes clears up mysterious problems.
Fred

When people call my phone it only rings once and then goes silent until voicemail picks up?

Is anyone having a problem with their voicemail on Iphone 4s. When people call me it only rings once on their end and then goes silent until my voicemail picks up?

Then get your iPhone checked out by an Apple Genius.. Or you can go online and Apple will check out your iPhone with an App sent via email.............

I got my iphone4 updated via wifi and its shows downloaded and when i install it, it shows verifying software and then says error occured while installing ???

hi, there, i got my iphone4 updated via wifi n its downloaded, its shows when i check the software update n when i install it, it shows verifying the software n after a couple of seconds comes back with "error while installing ios6" failed so many attempts and even tried to reset the phone, but no use, then i tried latest updated itunes too, can u believe it, it took ages to download n when it was 880mb of the 899mb file, error occured , so many failed attempts, can some one tell me what to do ? are there any issues with iphone4 updates? m scared to update it now, but really wanna get it on my phone.

I have experienced a similar error with the iPhone 4S. The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening. Suffice it to say I am not amused. Apple needs to work this out - I had trouble updating to 8.0.2 as well.

I just upgraded from a 3Gs to the new 4s and I noticed that my Bluetooth in my car no longer works well with Siri. Everytime I use a voice command to dial a number it starts the search, finds the number and then says call ended!

Is anyone else having this problem? I never had a problem with the 3Gs!!

Almost there...
I'm replying to myself, as I have found the answer.
1. Started iTunes, connected iPhone 4S, turned on Airplane mode.
2. In iTunes, hovered mouse over my iPhone 4S name in left column, in popup box clicked on "Restore from Backup..."
3. From menu clicked on name of my old iPhone 3GS backup.
4. Backup appeared to be finished in about 8 minutes, but I new that could not be correct...iPhone had rebooted, so I entered password. I could see that most apps were "waiting" and grayed out, also in iTunes top status box indicated that apps were being sync'd. Also noted that my iPhone 4S now had the same name as my "old" iPhone 3GS.
5. After some time (a couple of hours, perhaps, not sure because I went to sleep), everything appeared sync'd on new iPhone, and iTunes stated that sync was OK.
6. Manually renamed my new iPhone 4S to its correct name, then backed up to computer.
I decided to hold off on iCloud for now - two majore issues: 1) have heard some reports of data dissappearing, and 2) I will have to talk to Apple about MobileMe instructions for moving to iCloud, which state that move will not transfer my mobileme email, and also that I cannot install iCloud management software (nor sync to Outlook) on my Windows XP computer - I intend to upgrade to a new Win7 in January 2010, and I have heard it is not so simple to change iTunes/device syncing to another computer. Sounds like a good project for the Christmas-NewYear holidays...

My iPhone 4S rings once and goes to voicemail after the os 7 update. Has anyone experienced this problem? How do I fix it?

I updated my fully functional IPhone 4S to OS7. Now when someone calls it rings once and goes to voicemail. Has anyone had this problem? How do I fix it? And yes I have restored my phone and reloaded it twice, still *****. It has turned into a Microsoft product.

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

When making an outgoing call from my i phone, an icon of a microphone with a slash acroos it appears. I can hear the receiving party speak, but he cannot hear me. What has been shut off and how do I turn it on?

When making an outgoing call from my i phone, an icon of a microphone with a slash across appears. I can hear the recipient speakin but he cannot hear me. What has been turnedd off, and how do I turn it on?

I think mute is on, tap the microphone icon with the slash running through it

I am not able to see the picture assigned on a contact when making a outgoing call in ios 7

I am not able to see the picture assigned on a contact when making a outgoing call in ios 7

Same issue

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Iphone 4: while talking, phone automatically switches onto facetime and at other times when talking the sound "beep beep" is heard and disconnects from call?

Iphone 4: while talking, phone automatically switches onto facetime and at other times when talking the sound "beep beep" is heard and disconnects from call? Anyone know what is happening??

Basic troubleshooting from the User's Guide is reset, restart, restore. Has any of this been tried?

Method called more than once - and dies with EXC_BAD_ACCESS error

Hi,
In my app, I have 4 views with their respective viewControllers. In the appDelegate.m, I provide methods that allows to switch to any of these views. Following is code for switching to the editView:
-(void) flipToEditView {
[self populateTheList]; // populate an array
EditViewController *anEditVC = [[EditViewController alloc] initWithNibName:@"EditView" bundle:nil];
[self setEditVC:anEditVC];
[viewController.view removeFromSuperview];
[self.window addSubview:[editVC view]];
[anEditVC release]; }
The view is not switched - and moreover, this method is called more than once; and the app dies with EXCBADACCESS!
2009-08-23 14:54:40.648 iNotate[2128:20b] Album (before): x= 0 y=20 width=320 height=460
2009-08-23 14:54:40.653 iNotate[2128:20b] Album (after): x= 0 y= 0 width=320 height=480
warning: Couldn't find minimal bounds for "_sigtramp" - backtraces may be unreliable
(gdb) bt
#0 -[iNotateAppDelegate flipToEditView] (self=0x523690, _cmd=0x9563) at /Users/sam/MY_FILES/iPhone Apps/app/Classes/iNotateAppDelegate.m:116
#1 0x00008661 in -[FirstView editAction] (self=0x546a30, _cmd=0xac94) at /Users/sam/MY_FILES/iPhone Apps/app/FirstView.m:25
#2 0x30a4eee6 in -[UIApplication sendAction:to:from:forEvent:] ()
#3 0x30ab0d36 in -[UIControl sendAction:to:forEvent:] ()
#4 0x30ab11fe in -[UIControl(Internal) _sendActionsForEvents:withEvent:] ()
#5 0x30ab0544 in -[UIControl touchesEnded:withEvent:] ()
#6 0x30a67917 in -[UIWindow sendEvent:] ()
#7 0x30a56fff in -[UIApplication sendEvent:] ()
#8 0x30a561e0 in _UIApplicationHandleEvent ()
#9 0x31565dea in SendEvent ()
#10 0x3156840c in PurpleEventTimerCallBack ()
#11 0x94a713c5 in CFRunLoopRunSpecific ()
#12 0x94a71aa8 in CFRunLoopRunInMode ()
#13 0x31566600 in GSEventRunModal ()
#14 0x315666c5 in GSEventRun ()
#15 0x30a4eca0 in -[UIApplication _run] ()
#16 0x30a5a09c in UIApplicationMain ()
#17 0x000027e8 in main (argc=1, argv=0xbffff068) at /Users/sam/MY_FILES/iPhone Apps/app/main.m:14
Current language: auto; currently objective-c
(gdb) continue
2009-08-23 14:54:55.885 iNotate[2128:20b] >>>>>>>>>>>>>>>>>> populateTheList
(gdb) bt
#0 -[iNotateAppDelegate flipToEditView] (self=0x523690, _cmd=0x9563) at /Users/sam/MY_FILES/iPhone Apps/app/Classes/iNotateAppDelegate.m:116
#1 0x00008661 in -[FirstView editAction] (self=0x5457b0, _cmd=0xac94) at /Users/sam/MY_FILES/iPhone Apps/app/FirstView.m:25
#2 0x30a4eee6 in -[UIApplication sendAction:to:from:forEvent:] ()
#3 0x30ab0d36 in -[UIControl sendAction:to:forEvent:] ()
#4 0x30ab11fe in -[UIControl(Internal) _sendActionsForEvents:withEvent:] ()
#5 0x30ab0544 in -[UIControl touchesEnded:withEvent:] ()
#6 0x30a67917 in -[UIWindow sendEvent:] ()
#7 0x30a56fff in -[UIApplication sendEvent:] ()
#8 0x30a561e0 in _UIApplicationHandleEvent ()
#9 0x31565dea in SendEvent ()
#10 0x3156840c in PurpleEventTimerCallBack ()
#11 0x94a713c5 in CFRunLoopRunSpecific ()
#12 0x94a71aa8 in CFRunLoopRunInMode ()
#13 0x31566600 in GSEventRunModal ()
#14 0x315666c5 in GSEventRun ()
#15 0x30a4eca0 in -[UIApplication _run] ()
#16 0x30a5a09c in UIApplicationMain ()
#17 0x000027e8 in main (argc=1, argv=0xbffff068) at /Users/sam/MY_FILES/iPhone Apps/app/main.m:14
(gdb) continue
2009-08-23 14:55:22.493 iNotate[2128:20b] >>>>>>>>>>>>>>>>>> populateTheList
Program received signal: “EXCBADACCESS”.
(gdb) continue
What's happening here?
Sam!

-(void) flipToEditView {
[self populateTheList]; // populate an array
EditViewController *anEditVC = [[EditViewController alloc] initWithNibName:@"EditView" bundle:nil];
[self setEditVC:anEditVC];
[viewController.view removeFromSuperview];
[self.window addSubview:[editVC view]];
[anEditVC release]; }
}<---- is this } matched elsewhere?

FaceTime rings for short time then says call failed

FaceTime rings for a short time then says call failed ever time. Was working fine 2 nights ago. Reset all settings and no joy

The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

I use photoshop cs6 extended and when I create a new shortcut, it will work once and then disappear..any help on why this would happen

I use photoshop cs6 extended and when I create a new shortcut, it will work once and then disappear..any help on why this would happen

Sorry, no further idea what can cause this.
Is the shortcuts file truely saved to disk? You can find in the user path, where the preferences and presets are stored for PS. Or if you go to the dialog again where you change shortcuts, is it reverted there too?

When making an outgoing call, it rings once and then says 'Call failed' - any solutions?

Similar Messages

Maybe you are looking for