When messaging, the iPad quit sending messages in the middle of a conversation.

My Ipad will not send messages. This does not happen everytime. Tonight it quit in the middle of a conversation.

iMessage is down:
http://www.apple.com/support/systemstatus/

Similar Messages

  • Should I factory restore my iPod if I'm in the middle of a conversation with the Message App?

    Itunes cannot read my iPod Touch 4G contents again and I have to restore it. Would you recommend me to restore my iPod in the middle of a conversation with the built in message app? The conversation is important but I have the contact information.
    Also, if you send a message to someone's phone, will that phone display the Message ID of the iPod touch?

    Information will be erased while fixing apple products.
    As long as you are using an apple product to contact a different apple product you can find out who it is.

  • Hi People. I was doing my walk and listening to music using my 4s when in the middle of a song, the volume control would just automatically slide back to zero like it has a mind of its own. What gives?

    Hi People. I was doing my walk and listening to music using my 4s when in the middle of a song, the volume control would just automatically slide back to zero like it has a mind of its own. What gives?

    Hi djblue1969,
    I see that you may be having issues with your volume buttons on your iPhone. Here is an article for you that will help you troubleshoot this issue:
    Get help with buttons and switches on your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT203017
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • HT204368 I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am no

    I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    Is is important to note that I am not the only one experiencing this issue:
    This is a link to someone using the Motorola H19txt headset experiencing the same issue
    https://forums.motorola.com/posts/94ac15ad7c
    If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
    http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
    Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
    Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
    I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue.  I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web.  Hopefully they are already aware, but if not, maybe they will see i here.

    here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
    There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
    Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

  • I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another s

    I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    My Iphone5 was replaced and having same Problem. Only does this when using bluetooth for talking.

    I have the exact same issue... I've been using a Jabra Extreme2 and just this weekend, bought a Plantronics Marque2 and today had the same issue, so it's clearly not the headset but the phone or OS.
    I might try a restore and see if it helps...

  • Can I ad images to an ibook project when in the middle of creating it

    can I ad images to an ibook project when in the middle of creating

    I have the exact same issue... I've been using a Jabra Extreme2 and just this weekend, bought a Plantronics Marque2 and today had the same issue, so it's clearly not the headset but the phone or OS.
    I might try a restore and see if it helps...

  • My iPhone 4 shut down in the middle of a conversation and won't restart or charge. Any suggestions? The nearest Apple store is hours away from where I live.

    My iPhone 4 shut down in the middle of a conversation and won't restart or charge now. Any suggestions? The nearest Apple store is hours away and I depend on my phone to stay in constant touch with my child's specialist.

    I've tried that several times. It will not reset. The screen just stays black. I've never had this problem before. It usually resets the first time.

  • IPhone 3G stops receiving text messages in the middle of a conversation

    My iPhone 3G 3.1.2 frequently stops receiving text messages in the middle of a back-and-forth texting conversation. No other function on the phone seems to be interrupted, because I usually just continue using other apps before I realize it's been 10 minutes since the other person last replied.
    I can receive the messages by turning the phone off and on (once I realize what's going on), but this is such a hassle, especially because I can waste 15 minutes of another person's time in the process. Interestingly, once I turn the phone back on, I receive the messages and they tell me they were received at the earlier time (ie., if I was previously texting at 1:53, it might say 1:55, even though nothing showed up AT 1:55). So it seems like the phone receives the text and knows that it did, but for some reason doesn't display it or notify me at the time.
    I've seen similar threads in this forum to this problem, but they all seem to be accompanied by other malfunctions, which this is not.
    I'm on Telus in Canada.

    iMessage is down:
    http://www.apple.com/support/systemstatus/

  • Does anyone know what triggers the switch between text and iMessage in the middle of a conversation? Are there any differences in billing between text and iMessage?

    In the middle of a text conversation between another iOS 5.0 iPhone user and myself, the conversation elements switched back and forth several times between Text and iMessage. The phone actually tracked it and put little lines indicating the switch, and my comments changed from green to blue and back again. I can't think of anything I changed in the middle of the conversation. I was outside WiFi range, using the Cell network at the time. Now I tried it again, while i'm on WiFI and the messages are Text (green) again.

    1. Windows 8.1 Enterprise w Update is the best. It allows you for sideloading in corporate environment without additional tools and licenses.
    http://technet.microsoft.com/en-us/windows/jj874388.aspx
    2. N series is for EU (without IE).
    3. Profesional is fine, but you will need some tools to achieve the same functionality that you have in "pack" Enterprise.
    4. VL is volume license, a type of license for multiple computers (to say it simply)
    5. MSDN forum is better alternative for problems like this.
    6. Attached to MSDN are licenses or at least references to web resources. Read license agreements carefully and let your installation and use follow the license.
    Rgds
    Milos

  • My IPhone 4's incoming audio cuts off in the middle of a conversation...

    Just recently - I updated software and backed up iPhone - have not done restore... but - in the middle of conversations lately, suddenly I am not able to be heard.  I can hear the incoming voices... but they can't hear me.  Call is still connected... any idea why this is happening?

    Also I've tried to reset it and it still keeps doing the same thing

  • Last night my iPad quit sending email.

    iPad just started not sending mail.  Turned off and on.  Said smtp not recognized.  Now says a copy has been placed in your outbox.  The recipient was rejected by the server because it does not allow relaying.  This just started last night.

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • HT1430 iPad 1 consistently goes back to the menu when in the middle of an App.  Any fixes?

    That only works for a short time.  Anything I can try?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Note:
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

  • When in the middle of doing work Firefox just crashes, A sorry window pups up asking if user wants to Reload the same session or start a new session. This never happen with previous versions.

    Since I updated Firefox to the latest version it crashes a lot and although I can reload the session I was working with it is annoying and time consuming. I always keep my computer 100% updated and virus free as I always run Norton. I also have 4 G of RAM and 500 G disk drive so it is not lack of RAM and never keep more that 3 windows open at the same time.

    (1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
    You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
    If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
    (2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
    orange Firefox button (or Tools menu) > Options > Privacy
    * The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
    * The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
    Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

  • My phone turns mute when in the middle of a call?

    Latly when I'm talking on my iphone4 my phone mutes and the people on the other end can't hear me in mid conversation.  If I put the phone back down to look at it then I have to go to speaker phone.  What is going on , my phone is 2 weeks old!

    This used to happen to me when the iPhone 4 first came out but after an update it was resolved.  I think there was a proximity sensor issue with the old iOS code but it seems to be better now.  It hasn't happened with me running iOS5.
    Test putting your hand near the proximity sensor while on a call and see if you screen goes dim, if not then I would bring it back to the Apple store and see if they would replace the phone since you've only had it for 2 weeks.

  • ORA-00904 invalid IDENTIFIER IS COMING WHEN EXECUTING THE MIDDLE SCALAR

    SELECT (SELECT tran_descn FROM TRANCODEINFO WHERE tran_code = a.txn_type
    ) AS txn_type, a.tot,
    SELECT COUNT () FROM (*_
    SELECT f.txn_auth_id FROM FINGERTXNLOG f  WHERE f.bank_id = '515' AND f.txn_date_time BETWEEN_
    TO_DATE ('2011-03-01 00:00:00','YY/MM/DD HH24:MI:SS') AND TO_DATE ('2011-11-17 23:59:59','YY/MM/DD HH24:MI:SS')_
    AND f.txn_status = 'C'  AND f.txn_type = 'BV' AND f.txn_type = a.txn_type AND f.terminal_id = NVL('',f.terminal_id)_
    *) a*
    AS succ_records FROM (
    SELECT f.txn_type , COUNT (f.txn_auth_id) AS tot FROM FINGERTXNLOG f WHERE f.bank_id = '515' AND f.txn_date_time BETWEEN
    TO_DATE ('2011-03-01 00:00:00','YY/MM/DD HH24:MI:SS') AND TO_DATE ('2011-11-17 23:59:59','YY/MM/DD HH24:MI:SS')
    AND f.txn_type = 'BV' AND f.terminal_id = NVL('',f.terminal_id) GROUP BY f.txn_type
    ) a

    formatted the query, removed some underscores and commented some unnecessary *
    Is this is what you want ?
    SELECT
              SELECT
                   tran_descn
              FROM
                   TRANCODEINFO
              WHERE
                   tran_code = a.txn_type
         ) AS txn_type,
         a.tot,
              SELECT
                   COUNT (*)
              FROM
                        SELECT
                             f.txn_auth_id
                        FROM
                             FINGERTXNLOG f
                        WHERE
                             f.bank_id = '515'
                        AND f.txn_date_time BETWEEN TO_DATE ('2011-03-01 00:00:00','YY/MM/DD HH24:MI:SS') AND TO_DATE ('2011-11-17 23:59:59','YY/MM/DD HH24:MI:SS')
                        AND f.txn_status  = 'C'
                        AND f.txn_type    = 'BV'
                        AND f.txn_type    = a.txn_type
                        AND f.terminal_id = NVL('',f.terminal_id)
                   a
         ) AS succ_records
    FROM
              SELECT
                   f.txn_type ,
                   COUNT (f.txn_auth_id) AS tot
              FROM
                   FINGERTXNLOG f
              WHERE
                   f.bank_id = '515'
              AND f.txn_date_time BETWEEN TO_DATE ('2011-03-01 00:00:00','YY/MM/DD HH24:MI:SS') AND TO_DATE ('2011-11-17 23:59:59','YY/MM/DD HH24:MI:SS')
              AND f.txn_type    = 'BV'
              AND f.terminal_id = NVL('',f.terminal_id)
              GROUP BY
                   f.txn_type
         a

Maybe you are looking for