When my iphone 4s goes completely dead how long should it take to recognize the charger and begin to charge?

when my iphone 4s goes completely dead how long should it take to recongize the charger and begin to charge?

How do you know it is not charging? Do you see anything on the screen at all? Have you tried a reset? Hold the sleep/wake and home buttons until you see the Apple logo and then release. If the phone was completly dead, it may take up to 15 seconds or more for the Apple logo to appear.

Similar Messages

  • How long should it take to rest the settings i have done mine and it is still going after 1 hour it is just on the apple screen

    how long should it take to rest the settings i have done mine and it is still going after 1 hour it is just on the apple screen

    Hey Beck,
    Welcome to Apple Support Communities.
    It sounds like you’ve Reset All Settings on your iPhone 4s and now you’re running into an issue where the device only displays an Apple logo on startup. The article linked below provides troubleshooting suggestions that should be able to help you resolve the issue.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support.
    Ciao,
    -Jason

  • HT4623 Approximately how long should it take to update the iOS 7.0.2.....?  So far it has taken over 8 hours and the bar is still not half way.

    Approximately how long should it take to update the iOS 7.0.2....?  So far it has been over 8 hours and the bar is not even half way....

    Something have gone wrong somewhere.
    Try and reset your iPad.
    Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

  • How long should it take to sync the iphone 4S?

    I have been trying to sync my iphone 4S all night. How long should this procedure take?

    Refer to this article
    http://support.apple.com/kb/TS2696?viewlocale=en_US

  • How long should it take to download the InDesign trial?

    I have downloaded the creative cloud and it shows that Indesign and Photoshop are uploaded apps.  Then when I click on them nothing happens.  I tried to download InDesign again.  All my computer is showing is a spinning icon.  There is no percentage of completion, nothing to click on status, just a spinning wheel.  I am concerned.  Can you help me?

    Hi e_doug,
    The download and installation of Indesign should not take more than a few minutes and it also depends on the network speed as well as the computer specs.
    If the Creative Cloud Desktop App shows the apps as installed then please check your system, under Start > Programs, if you are able to find the application or not.
    If not then please follow solution 2 and 3 of the KB : http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
    Regards,
    Rave

  • How long should it take to restore the iphone 5 from iCloud?

    I had 3.8 gb in my iphone 4 backup and this new restore seems to be stopping at 6.1 mb. Restored twice with same results. Said device is still restoring. Nearly 24 hours.

    Something is wrong.
    - Reset the iPhone.
    Reset iPhone: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - and try again.

  • How long should it take to recharge the iPad 2?

    The time required to recharge the iPad 2 battery seems very excessive. Starting at a little less than 20%, after 4 hours it had recharged only to 75 %.

    VIncent, Thanks for the useless Info.

  • How long should it take to update the shuffle?

    mine has been "updating" for around 45 min and its getting quite annoying waiting. or is there a problem with it?

    Depends on whether you have "convert higher rate ...to 128kbps AAC" checked in Settings. IF NOT, please provide more detail.

  • I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

    I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

    Triple-click anywhere in the line below to select it:
    tmutil compare -E
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
    Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

  • How long should CHKDSK take ?

    Hi
    I have XP installed on Parallels (not Boot Camp) and it crashes frequently.
    When I restart XP it wants to run CHKDSK. When I allow it it quickly gets up to a percent complete (say 18% or 31% but no higher) then just stays there for hours and never seems to complete.
    How long should it take ? If I check Activity Monitor then Parallel's CPU usage is low but variable so it seems to be doing something...
    Should I just leave it to run all night maybe ?
    Thanks

    DU doesn't have any support I know of for mapping out sectors. Either the drive will, or you can scan media using TechTool Pro. Speedtools has two programs, one to test media, and another that can auto assign new blocks, or attempt to force the drive to do so. It also has an indepth SMART test which can take about 45 minutes for a drive.
    Even SoftRAID I don't think does but will alert if there is an I/O write error (and if anyone was going to, SoftRAID would).
    Disk Warrior will write to system log and you can see if there are any used spares, how many left which a Google study found to be a good indicator of a failing drive.
    Bad sectors that are used by partition tables require reformatting. DU does test non-user hidden partition table blocks, which is what may happen when DU fails to partition a drive. SoftRAID also tests the first and last 100 sectors, and you can begin and safely stop a zero-all of a drive before creating partitions.
    Most of the time, you have to use the zero-all in DU or the more thorough 7-way write-erase to (hopefully) map out bad blocks. Say if TechTool Pro discovers bad media, which of course means losing all data, which is why I own Speedtools.
    Chkdsk which does have the option, if you enable it, to map out bad sectors. Something you can't do normally with OS X. Which is one feature of Windows we seem to lack.

  • I have tried to download update for Firefox 3 separate times ,but each time it runs for more than 30 minutes and is still running, is this normal,? How long should this take?

    I have tried downloading the update for Firefox 3 times, but had to go to bed before it was finiahed....seemed to be more than 45 minutes is this normal? How long should it take?

    Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
    http://support.apple.com/kb/TS1591

  • My iPhone 5 has been dead for weeks.. I just now found it and I plugged it in.. How long should it take for it to turn on?

    My iPhone 5 has been dead for weeks.. I just now found it and plugged it in, how long should it take for it to turn on??

    I think that the battery is dead because , if you don't charge it for a long time the battery will ruin. You must wait, with the charger plugged, for a long time to turn it on. it could be also a worse problem and you have to replace your battery

  • How long should it take iOS 6.1 to load on my iPhone?

    How long should it take iOS 6.1 to load on my iPhone? It's been 3 hours and it is stuck in the same part of the download.

    I now have the new phone. The order number is still not appearing on My 02.
    It turns out that when I bought the phone, it was assigned a new sim card/telephone number. Now there are two phone numbers on my o2 account - the one I use, the one that came with the new phone.
    The order number is appearing under the new sim card's phone number, not the one I intend to use.
    Hopefully, O2'll be able to update the order and link it to the telephone number I use. It's not a major problem (at all) but I'd rather have it connected to the number I use than a random number that came with the phone.

  • IPhone 4 water damage - Replacement (how long will it take?)

    If i just completely broke my iphone 4 (won't even turn on) due to water damage I understand that I can get a $199 refurbished replacement.
    I was just wondering if anyone knew how long it would take to get the replacement phone. For example, if I went into the store gave them my old phone, would I be leaving with the replacement phone that day or would they have to send it to me in the mail?
    Thanks in advance.

    If you take the iPhone to an Apple Store, then unless they happen to be out of stock on replacement units, you'll walk out with one.
    Regards.

  • Apple has placed a temporary authorization amount hold in my card for repair. My old iphone has been received by apple. how long does it take to release the amount?

    Apple has placed a temporary authorization amount hold in my card for repair. My old iphone has been received by apple. how long does it take to release the amount?

    How long it takes depends partially on your bank. Once they release it, it could take several days for the authorization to roll off of your account. It is generally not a problem unless you're using a debit card, which will lock the funds in your checking account and make them unavailable, which I presume you did or you wouldn't be worried about it.
    This is not unique to Apple. That's a problem when using debit cards for any purchase.  Several years ago, when gas prices spiked to $4 a gallon here, gas stations would routinely authorize and hold upwards of $100 every time you tried to pay at the pump. Created some major headaches for the working stiffs just trying to get to their jobs and pay the bills.

Maybe you are looking for

  • IPhone Contacts Backed Up to PC Windows XP Pro

    How can I backup my iPhone Contacts List to my Windows XP Pro PC ?? And then restore the Contacts List from my Windows XP Pro PC to my IPhone ? Thanks Message was edited by: VDC

  • How to reinstall OS without a functioning CD Drive

    I just got a Quicksilver tower and I sloppily copied my laptop's system into the Tower's. Now it won't start up (giving me the system folder with question mark icon). Problem is, the cd drive on the tower isn't working. I took it apart and the gears

  • PDF link of type "open a file" won't work from within web-browser

    Hi! I have a pdf-document in which I have created a link of the type "Open a file" ( in this case it is a word document, but the type of file doesn't matter).  When I click this link directly in Acrobat (Acrobat 9 Standard) it works just as excpected

  • Unable to extend the VO ConsInvTableVO in the iReceivables page

    Hi All, I am getting the error message "Each row in the Query Result Columns must be mapped to a unique Attribute in the Mapped Entity columns" when I am trying to extend view object ConsInvTableVO in iReceivables page. Though there were many posts a

  • Command clash in uzbl-tabbed

    Hi all, I am probably doing something very wrong, but it seems to me there is a command clash for the 'gi' command in uzbl-tabbed. For in uzbl-browser 'gi' means go to the first input, but in uzbl-tabbed it means go to tab <index>. I would like to us