When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,
When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution
I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.
Similar Messages
-
Hi,
I have an iPhone 4. Bought a Motorola Roadster2 but really geared to Android.
Will return it. Can anyone help with a reccommendation for a Bluetooth Hands Free
Speaker for car that is most compatible with the iPhone/IOS.
ThanksOK, in Australia, the best options I have found so far are:
Powere cradle - http://www.holdmyphone.net/select-your-device.html?ddlBrands=Ford&ddlModels=Terr itory-04_09&ddlsubaccessories=0&ddlaccessories=0&hselect=Phone&hselect2=Apple&hs elect3=iPhone-3G
BT carkit with Stereo integration - http://www.ow.com.au/shop/Car-Kits-Bluetooth/Parrot-CK3000-Evolution-Advanced-Bl uetooth-Car-Kit
These are very simple to use and I havent had any issues after 12 months usage.
Parrott have quite a few advanced products which are very good. -
TS1398 Hi..I have problem disconnected my wifi in iPhone 4 with ios7..
Hi..I have problem disconnected my wifi in iPhone 4 with ios7..
Thanks for ur help but u can't fixed nd I know this way ,I tried many time before but doesn't work..I am sure this new software iOS 7.0.4 broke the connection of wifi,because last time was working normal ,so this is just buisness for Apple company to make more offer from people to think always to bay new one.
This is all just game buisness...thanks for helping again . -
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I'm trying to update my iphone 4 with ios7.0.4 and I'm showing a a plug that must go to my itunes. when I do that it says it has to restore my phone to manufactory setting. is there any way around this
No. Make a backup first.
-
Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?
Sounds like a possible permissions issue, try repairing the permissions using Disk Utility.
You can open Disk Utility several ways.
1. Use the Spotlight in the Upper Right corner of the screen and search for it, then click it to open it.
2. Open a new finder window (File> New Window)
- Applications>Utilities>Disk Utility
3. Click on the Finder
- Click 'Go' in the menu bar across the top of the screen.
- Click Utilities, then double click on Disk Utility.
Once Disk Utility is open there should be a column on the left side, the name of your hard drive should be listed there.
(By Default it is named Mac HD or Macintosh HD)
Click on it to highlight it.
There should then be a few buttons you can click
- Verify Disk Permissions
- Repair Disk Permissions
- Verify Disk
- Repair Disk
Click Repair Disk Permissions -
I have been trying to log onto the Wounded Warriors Program Portal. I can Log in and then when I click on the rewards it tried to go to the page the just takes me back to the same page I was on. This is very frustrating. I am new to the Mac World so please bare with me. Please tell me there is help somewhere for this issue. It seems it is blocked or not letting me through. Can anyone please help me out. Thanks
Both Mail and Safari have Activity Options that open a screen that shows you just how the site or mail is loading.
In Safari if you are having trouble with a site in activity you will see the count of items being downloaded - and if an error occurs it shows red.
On the top is the number of items it is loading or trying to load and the count should be increasing. If the count stops, and you don't have errors it may be that too many people are going after the same site and your request just timed out. Have had the time out on a news site when trying to load a most popular article. -
When my wife receives a call and her screen is locked she gets two choices. Remind me and answer. When I get a call, I get 3 buttons. Remind me, message and answer. Both are iPhone 4S with ios7. Is there some setting to fix this? I thought the phones were set up identically.
Thanks.Glad it helped. I only remembered it was there because I'd just been checking something else in that screen.
Best of luck. -
Will I need to purchase iWork for my iPad if I purchase an iPhone 5s? Everybody knows the iPhone 5s with IOS7 gives iWork for free. I assume that if I buy an iPhone 5s (or 5c) then iWork would be listed as a "purchased" app in my itunes store under my account. My iPad retina is in the same account... or are keynote, pages, and numbers completely seperate between ipad and iphone? I know they would be a seperate purchase for my Powerbook. Thanks so much for your help!
Hi,
I was able to load the Productivity Suite / Free !! on both my iPad mini and my iPhone 5s with no problems and at no cost. -
Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei SolovievHi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
> -
I have just updated my iphone 4s with ios7. Since then i cannot play movies from my netflix app using my av cable to tv. which i baught from an apple store. i get a message saying turn off mirroring on airplay. i dont have airplay or an apple TV. what can i do?
Thanks jonmac22Hi Everyone,
hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
Here's how to do it:
1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
2) Download your ipsw restore file from Apple.
5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3) In iTunes select yout ATV, hold SHIFT and click on Restore
4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
Enjoy!
raadore -
About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it? Thank you very much.
Where are you importing from – a camera or computer? If you are optimizing at import, make sure the background processes are completed. (Command-9)
Russ -
I deleted photos cause the capacity is so big but i backup first on itunes then when i was to restore some of those i cannot find photos from the last backup that i 've done. What to do?
As far as i know, you can use a third party iPad photos recovery software to have a try. If i remember correctly, this software has two methods to restore your photos. One is recovering from your iTunes backup, another is recovering from your iPad directly.
http://easy-iphone-recovery.blogspot.com/iphone-recovery-resource.html
It is worth to try if your photos are important. -
How can I change my Apple ID for iCloud on iPhone 5 with iOS7?
How can I change my Apple ID for iCloud on iPhone 5 with iOS7? When I updated to iOS7 it kept my old ID on some features and my new one on others. I was able to change my Apple ID on all apps except iCloud. I don't have the original email account I used when setting up my iPhone with the old Apple ID and I have no clue what the password was. It appears I first need to turn off "Find my iPhone" which requires the old Apple ID, then I can delete the iCloud account. I want to use my current Apple ID to be able to use the "Find my iPhone" feature in iOS7. I hope someone can help!!
GmaL2 wrote:
That doesn't help. It's an old email that doesn't work anymore. Please read the entire post. iOS7 won't let you delete iCloud unless you have the password for the old/inactive email/Apple ID.
You never mentioned that you didn't have access to that email. There are some specific steps you can perform to retrieve the old Apple ID password. -
Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? There is only one sparse bundle but when I enter time machine I don't see my historic backups. I use a synology DS212 for my time machine. Started a new backup which is 218gb but it says 618 gb is occupied therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014. As you can see there is a second sparse bundle from 2012. Not sure what that is.
This is an old message now, but what happened to me similarly was:
I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
(I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
Charles
Maybe you are looking for
-
Deleted Items Reappearing in iCal
I am trying to delete items from iCal but they keep reappearing after a few minutes. I'm not syncing to an iPhone, iPod, etc, so I can't figure out why this keeps happening. For example, I am looking at my April calendar, I delete items that I no lon
-
Transfer posting with Mov Type 311E in MIGO with reference to SC-PO
Hi, I am working with MTO scenario. I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific. However, system does not allow me to do the same. whenever transfer posti
-
How do you zoom in to autocad dwg to plot to PDF, then review the file, it won't open the PDF just created in adobe, want to email PDF to outside printer
-
I had hoped to use recno in order to use JE as a reliable write-log for a large in-memory data structure. No recno, however. Should I just use a sequence to generate keys and use the btree, or should I look elsewhere altogether to solve this problem?
-
Does anyone have good tricks to show two video sources at once in two different boxes. I have a lot of web-compressed video I want to include along with high-res pics and good quality video, so I want to reduce the screen size of the web stuff. With