When my time machine tries to backup to my time capsule I get the following message"The backup disk image "/Volumes/Data/Kent's MacBook Pro.sparsebundle" is already in use. " What do I need to do to fix this?
When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?
Restart the Time Capsule.
Similar Messages
-
So my time capsule is 1 year old exactly and now I am getting this message:he backup disk image “/Volumes/Data/alicia’s MacBook Pro.sparsebundle” is already in use. what does this mean and how do I fix it? i have 1.84T left of space. I have been using this time machine successfully for exactly one year and just now am having an issue.
Thanks,This error involves a complex procedure to remedy the problem:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try a backup -
Time Machine fails with this error: "The backup disk image “/Volumes/Data/Barbara’s MacBook Pro.sparsebundle” is already in use."
Can anyone assist me in correcting the problem causing this? Thanks.Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think. -
I am receiving the following error on my time machine, does anyone know what it means? Error message = The backup disk image “/Volumes/Data/Richard’s MacBook Pro.sparsebundle” is already in use.
Please look over the right of this page under the heading of More Like This for multiple answers and solutions for this bug.
-
Hi folks - I didn't see my issue answered here, so I thought I would just toss it out there in case anyone had advice.
My error message is: The backup disk image “/Volumes/Data/Michael's MacBook Pro.sparsebundle” is already in use.
Thoughts?Look on the right hand side .. more like this.. I am surprised you can have missed it.. we get about 10 requests a day now to fix it.. especially since Mountain Lion has made it 10x worse.
C12 and C17
http://pondini.org/TM/Troubleshooting.html -
Here is the message I got from the red "i" message... please help.The backup disk image “/Volumes/Data/Lisa’s MacBook Pro.sparsebundle” is already in use.
http://pondini.org/TM/C12.html
-
Can anyone tell me what "The backup disk image"/Volumes/Data/Sue's MacBook Pro.sparsebundle is in use mean when it comes to using my Time Machine. How do I solve this blip in the back-up process?
The TM backup has not properly dismounted the drive on the last backup or has lost connection in some way.
It is a common problem.. the most common in this discussion area.. look at the right hand "More Like This" column for multiple similar threads.
Solution is simple.. some sort of restart is needed of the TC.. you can do this via the airport utility or just pull the power, count to 10 and power it on again.
See C12 for more details.
http://pondini.org/TM/Troubleshooting.html -
Why would my computer start only printing "blurred images" of my documents.... And now I get this message about my Time Machine backups?
You have two different issues. One is a problem with your printer and one is a Time Machine problem. You'll need to contact your printer support to find out why your printer is not working.
You should be posting your Time Machine issue in the Time Machine section but straight from the linked articles to the right side of this page:
https://discussions.apple.com/message/20261539#20261539 -
What does this mean and How do I correct it? Kelly
It means that there are bugs in Lion and Mountain Lion.
Pull the power cord from the back of the Time Capsule
Count to 10
Plug the power cord back in to the back of the Time Capsule
This simple reset will fix the issue about 98% of the time. If you are in the 2% category, you will need more "fixes"
The Backup disk image ... sparsebundle ... is already in use. -
Hello,
its been few days i keep recieving a message saying:
TIME MACHINE COULDNT COMPLETE THE BACKUP TO TC.
The backup disk image “/Volumes/Data/Krzysztof’s MacBook Air.sparsebundle” is already in use.
what shall i do?Tell Apple.
Apple - Time Capsule - Feedback -
time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?
I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time. -
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular -
My normally reliable Time Machine is giving following error message;-
The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use.
What does it mean and how do I deal with it?I have loaded it into ML using a great and free utility unpkg.. it probably works much the same as Pacifist.
Locate your downloaded 5.6 dmg file.. click it so you can see the pkg but don't bother opening it.
Download, install and run unpkg.
http://www.timdoug.com/unpkg/
Drag the airport utility 5.6 pkg over to unpkg.. and it will create a new directory on the desktop.. named AirPortUtility56.. drill down to Applications, Utilities and you will find the unpackaged utiity.. drag it to your main utilities directory or just run it where you are.. -
How do I fix this message from time machine: The backup disk image “/Volumes/Data/Jim Linnell’s Computer.sparsebundle” is already in use.
Restart the computer and your Time Machine backup system.
See also from More Like This:
what do I do about this time machine error message? The backup disk image “/Volumes/Data/Paul Brandow’s Computer.sparsebundle” is already in use.
Time Machine gives following error message;- The backup disk image “/Volumes/Data/JOE OTOOLE’s Computer.sparsebundle” is already in use. What does it mean?
Maybe you are looking for
-
Guys, I have "Essbase Server Release 11.1.1.3.0 - 64bit" running on "Red Hat Enterprise Linux AS release 4 (Nahant Update 6)". The package number for "Essbase Server Release 11.1.1.3.0" for 32-bit and 64-bit is same e.g. "V17389-01 – Essbase Server"
-
Error While Accessing the EM console
Hi After succesfully Installing SOA Suite11g (PS1+PS2) , when i try to click any one of the links from the home page of the EM Console(after logging in). I am getting below error. Any help is highly appreciated. I am able to access the soa-infra URL
-
How do I export a SWF from CS4 and make it viewable for clients?
I'm currently using Indesign CS4 and just learned how to export an animated file as a SWF file. Once exported I have both a SWF file and a HTML file, however when I send either file to a client they don't open. How to I format the file for customer
-
BPC 10 NW Book Publication Err
Hi All, We are on BPC 10 NW SP5 Release 801 and EPM Add-In SP16. When my user trying to run a book of reports in one single pdf we are getting this error. It is able to create upto 3 report and failing on 4th one onwards. Even though we changed order
-
Accessing Var from main Nib/Class - [global variables]
I'm sure this is a simple solution and the problem is I'm just not thinking right. I just started programming in Objective C but have come a long way in the past 2 weeks. Pretty extensive knowledge in C# and some java. Anyways, I've been creating an