When on mobile data, my phone incorrectly thinks it's on eastern time instead of mountain time.

Hi all,
I have an HTC One running 4.4.2 and noticed while driving around today that my phone was two hours ahead of the actual time. When I checked my settings, the phone was set to Automatic date & time and Automatic time zone. When I looked at the Select time zone field, it said Eastern time zone. However, I'm in the Mountain time zone. The time remained off by 2 hours for the entirety of my hour-long drive home. However, as soon as I got home and the phone connected to my wi-fi network, the time and time zone, went back to the correct time and zone. Any ideas what causes the problem?
John

MackDog,
Help has arrived! Thanks for providing those very helpful details to help us determine the root cause of this concern.
The time zone located on the device is dependant on the GPS and data connection. It is possible it may have been a software glitch or it may have been misread by the GPS. The great news is, that is has since returned back to the correct time. Please continue to keep an eye out and let us know if this issue persists or was just a one time thing. If it happens again, try rebooting the phone immediately and see if it helps resolve the concern.
EfrainM_VZW
Follow us on Twitter @VZWSupport

Similar Messages

When having mobile data off my picture messages wont open?and i dont receive them on time

when i turn on the mobile data on all my picture messages pop up as new messages when they are 2 days old then im able to see them but why? they stop when the mobile data is off.

MMS will not send/receive when on WiFi...They will be held in Que. If you try to send MMS with WiFi on , I have found that even after turning WiFi off, you have to resend the MMS via VZW network. Hth.

HT201269 when setting up my new phone I think I missed the set up your phone in iTunes. how do i go back now and set it up?

When setting up my new phone I must have skipped past the set up your phone on itunes. How do I go back and download all my stuff from my old phone?

Unless you have already loaded a bunch of data the easisest way would be to go to Settings > General > Reset > Reset All Settings

Search not working when using mobile data

DescriptionWhen using mobile data, every time I try to search for tracks, I get the 'error occurred' message. A more detailed description, using numbered steps1. Be using mobile data as opposed to wifi2. Use search function What I expected to happenSee my search results What actually happenedSee 'an error occurred' message. Important - even though the screenshot shows 1 'bar' of signal on 3G, this problem occurs regardless of signal level. I've tried to search using full-strength 4G and still seen this problem. My iPad/iPhone modeliPhone 6 / 64GB Device’s Operating SystemiOS 8.4 (12H143) Is your device jailbroken?No Approximately how many playlists do you have?More than 200 My mobile Spotify version3.5.0.1069 My desktop Spotify version (if applicable)1.0.10.107.gd0dfca3a My provider and countryEE UK My usernametombot18 Do you have any screenshots you can attach to more clearly explain your issue?See attached screenshot

I have the same problem.... anything fix it?

When formatting a date field in a where clause the template put dot instead of comma

Hello to Headstart Workers !
In a query find block the template construct a where clause, in some cases, and i dont know when the template is formatting a date field putting a dot instead of a comma.
Ex.: to_date('19-01-2001'.'DD-MM-YYYY')
Anybody knows why or where the template do this.
Congratulations
Nelson

- We created it using the HS utilities.
- "nls_numeric_character = ,.".
- it onky happen when the field date is not the first field in the where clause.
- i can see the problem just after pressing find button, already in the ls_block in last_query.
- the find_query works normally but cannot edit any line in ls_block.
Hope that i had helping
Regards
Nelson
null

Time Issue When Transfering Data

I am trying to transfer data from LabView into Excel but when I do I am getting a value of 12/31/1905 8:00 PM for the time instead of the time elapsed since the start of the experiment. I have changed the time manually in Excel and my data was correct. I tried to change the time in the diagram window but it has yet to make a change in the Excel file that results.
Amelia House
University of Delaware

Ok, so the reason that you are getting the type of t0 that I was mentioning is because the subVIs that you are calling to get data from your TDS1k/2k returns an artificial timestamp since the hardware doesn't seem to return any.
The image i'm including is what I was trying to say.
If that is still no good, you may want to post an additional message either on the LabVIEW forum or a hardware forum, given that this is the SignalExpress forum. On that note, there is a SignalExpress Tektronix Edition which will work with a TDS1k/2k and easily export data to Excel.
I hope that was still a little helpful.
Phil
Attachments:
waveformT0.gif ‏2 KB

Problem with Mobile Phone Samsung G800 when put in "data transfer" mode

Greetings everyone.
I have a Samsung SGH G800 Phone with a 4 GB SD on it. Everything works fine except from when the I connect the phone to the computer and enable "data transfer mode" which should make the phone appear as a hard disk on my iMac.
the errors I'm getting from dmesg are these:
isk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6276] [LBlkNum 0] [FSLogMsgID 1281672978] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1281672978] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6532] [LBlkNum 32] [FSLogMsgID 2089623797] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 2089623797] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6788] [LBlkNum 64] [FSLogMsgID 2018660302] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 2018660302] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7044] [LBlkNum 96] [FSLogMsgID 1586086454] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1586086454] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6540] [LBlkNum 33] [FSLogMsgID 1771542890] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1771542890] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6796] [LBlkNum 65] [FSLogMsgID 977677278] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 977677278] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7052] [LBlkNum 97] [FSLogMsgID 1983087645] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1983087645] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7308] [LBlkNum 129] [FSLogMsgID 1984679439] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1984679439] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7564] [LBlkNum 161] [FSLogMsgID 882699219] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 882699219] [FSLogMsgOrder Last]
disk3: I/O error.
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7820] [LBlkNum 193] [FSLogMsgID 1191153157] [FSLogMsgOrder First]
0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1191153157] [FSLogMsgOrder Last]
Apparently it tries to mount the device but it gets an IO error, what could it be the reason in your opinion? It appears as a hardware level error to me, do you think is it so?
thanks for your time in advance.

HI,
If you go here you will see your phone is not supported by Mac OS X 10.5.
http://support.apple.com/kb/HT2824
Carolyn
Message was edited by: Carolyn Samit

I updated my LG G3 this week and now it SUCKS! When I'm connected to WIFI, nothing on Facebook works. The photos and videos won't populate. I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now.

I updated my LG G3 this week and now it SUCKS! When I'm connected to WIFI, nothing on Facebook works. The photos and videos won't populate. I have to turn off the WIFI and only use the mobile data. Not to mention, I really hate the way it looks now. Before I updated my phone, I really liked it, now I don't like my phone at all! When will this be fixed? I hope it's soon. I'm thinking of changing providers now.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

What are the settings in i phone 4s for connecting internet in mobile data ?

what are the settings in i phone 4s for connecting internet in mobile data ?

Did you ever get a reply to this. I have the same problem. I have the same problem when even when I reply to an email... no photo shows up in my new reply message. The only way I have figured out is to use the "forward" option.
But this still does not solve the problem when people email me back... I have no idea what photo they are speaking of. Instead of a photo... there is a <photo name of some sort>.
Let me know if you ever hear on this one.
Many thanks.

Update 4.1.2 wifi turns off when mobile data is on.

Since the latest update from Verizon whenever I connect to Wifi it connects then drops back to 4G right away. When I turn off the mobile data the wifi will connect again. This was never the case prior to the update.

Hi Scrappyman13. That fantastic update was intended to make your S3 experience better, not cause troubles. Is this happening when you're connecting to one specific WiFi, or is it any WiFi you've tried since the update? When it seems to drop the WiFi, do you see any error message? Let's start by removing http://vz.to/Qqsrpw and readding http://vz.to/VVj91g your WiFi connection. Also, try rebooting the battery http://vz.to/UwOaYo and SIM http://vz.to/V5RXCf to refresh your phone since the update.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

I bought an unlocked 3G and when I try to use the internet, it says 'Could not activate mobile data network'.

Hi all,
I have recently acquired an iPhone 3G 16GB. It is unlocked and I have put my sim card in (Virgin Mobile) and used it without problem when calling or sending text messages. The internet all works fine when connected to a wi-fi network.
In the top left hand corner it says '3G', however if I try anything related to the internet (Safari, Twitter etc.) a message will appear reading 'Could not activate mobile data network'. This is very inconvenient for me. All internet related activities work fine when connected to a wi-fi network.
Is this a problem with all unlocked phones? Is there a solution to this? Or am I simply unable to use the internet without wi-fi on this model?
Any help would be greatly appreciated, all questions may sound silly, but this is my first iPhone and I am very inexperienced with them!
Thanks

First, you don't have a 3G if you have iOS 6.1.4. The 3G cannot go higher than iOS 4.2.1. That is not related to your problem, but worth knowing.
Let's try the obvious first. Tap the Settings icon. Then tap General. Then Cellular. Is Cellular Data on? Is there an entry for APN? If there is contact your carrier and ask what the APN settings should be. If there is no entry don't worry; the APN is automatic with your carrier.

I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? 20 Year Verizon Client

I am looking into Buying Retail a New Blackberry Q10. Doing this to avoid having to Give up my old Data Plan. Have read that when you activate a new Phone it forces you to pick a new Plan. Is this True? and How to I avoid this? Any other advise in this matter would be greatly appreciated.
20 Year Plus Verizon Client

The only "unlimited" plan I can think of where this would not apply is the old Connect plan for multimedia/basic phones. That unlimited data, on devices such as the LG Voyager, EnvTouch, and other "multimedia" devices is not the same.
If you currently have an individual $29.99 unlimited data plan with a 3G Smartphone, then you can buy a BBQ10 retail and activate it with the same data plan and keep the unlimited.

Problem = always shut down when connect to the internet (both via wifi & mobile data)

problem = always shut down when connect to the internet (both via wifi & mobile data) my problem is my phone (sony z1) regularly shut down automatically when connect to the internet (both via wifi & mobile data). it just happens after i downloaded and installed the latest available software (as following): Android version: Google Android 4.3 (Jelly Bean) Latest available software: 14.2.A.1.136 Release started: 2014-01-30 please suggest how to fix this problem.

I suggest you disable any battery savers or task killers if you have.Boot your phone in safe mode and see how it is:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Mobile Data disabling and affecting phone settings

Hi,
Every now and again my phone will prompt that mobile data is disabled. When that happens, the display settings I have set (2mins to auto screen lock and brightness) reset to their original settings. Does anyone know what is happening or how I fix it?
Thanks

No problem, Stamina Mode operates all the time, not just when the battery is low.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Z3 Compact using mobile data even when disabled.

Hey there,
my new z3 compact is connecting to the mobile internet every 3 hours and causing costs! Mobile data is disabled in the setting and in the quick menu. WIFI is available all the time. In the settings it shows 0MB of volume for all apps. Besides the preinstalled apps and widgets I use only some apps wich are well known and can be trusted.
Now how can I see wich app/widget is connecting? And who pays my bills?? It seems I cannot trust my device and I dont like that idea.
Any advice? The Support didnt help much - told me to reset and wait for the next bill to see if it worked...
Gabriel

If you can't access some live statistics from your mobile operator at least you can try this.
Go into Settings / Power / Battery Usage.
There will be a graph showing battery discharge ratio and list of all apps using power below.
When you click on the app (yes, I know it will be annoying) for some of them there will be "Mobile data sent" and "Mobile data received".
For example in my phone under "Android OS" I have -
CPU total 1 hour 1 minute
CPU main - 16 seconds
Keep active - 9m 59s
Data received - 6,34kB
Data sent - 14,14 kB
Wifi received - 484 bytes
Wifi sent - 531 bytes.
Check every single app on the list. Maybe you will find it there. I suspect Google Play Services. Someone on the forum mentioned that they ignore disabling auto update. Maybe Google messed something with disabling mobile transmission?
There is a one, very hard way to disable accessing mobile network data if you don't need that.
Head over to Settings / More / Cellular Networks / Access points name (APNs).
There will be APN for your data transfers and for MMS. Leave MMS alone but delete data APN. You will be able to configure it again manually but as long as there will be no APN for data transmission your phone will not be able to connect to your operator and cause costs.
Best regards,
Sergio PL
Xperia Z1 / Nexus 7 (2012)

When on mobile data, my phone incorrectly thinks it's on eastern time instead of mountain time.

Similar Messages

Maybe you are looking for