When opening a non on demand sub-report it is only printing portrait?

Hi All,
I am running crystal XI,
I have a landscape report, created a non on demand sub-report,
Which generates the sub-report that is in portrait, even though the page setup says landscape,
When previewing it also shows me the margins of portrait in a landscape page.
Best regards and thanks in advanced,
Gavin Doris

OK. Here you go:
Step 1: Highlight the Subreport
Step 2: Move the Subreport towards the left margin:
Step 3: Increase the width of the Subreport so that it touches the right most margin:
Hope this makes sense?
-Abhilash

Similar Messages

Open an on demand sub report in a new window

Hi There!
While reading the forum threads, there is an thread that have the same issue that i want to find out, but the thread is not yet answered. Could you guys help me. Thanks!
Thread by: Kylie Edwards
Hi I am wondering if it is possible to open an on demand sub report in a new window.
I have a report that has 6 level drill and I want to be able to close the information in the sub report to give the end user the ability to keep drilling.
I have tried inserting a text box with a hyper link back to the main report but hyper links do not seem to work the subreport. "
Thanks and Regards,
Joni

Hi all,
Sorry for the late reply, and thank you guys for the helped. I manage to solve the problem myself
To Falk:
Ya you are right, for what i know, Inforview is not possible to open a subreport from a RPT file in a new windows as well.
To Wallie Cheng :
When i posted the question for help, i just want to know if i could display a crystal report on a new window.
My situation is that i have a page that is size 3in x 3in ( Just a small static graph ) and i wanna attached a A4 report. In order to have a nicer view at inforview ( 3in x 3in border box ), i will need to reduced the size of the crystal report. The size of the main report is now properly change, but it affects the view for the sub report ( As subreport is A4 size, the system display the A4 size document in a serveral 3in x 3in page. -_-"' ).
To Abhishek:
I wanna try out your solution, but i can't find the hyperlink tab in perference option ( in inforview ).
I manage to solved my problem (suitation that i have explain to Wallie Cheng ). That is to created a hyperlink to the report. Rather than a subreport link.
Thanks and Regards,
Joni

On Demand Sub-Report not working

Hello,
I am using crystal reports xi-r2 I am having trouble getting an on-demand sub-report to work. After much trouble I am able to get the sub-report to work in the designer but as soon as I publish the report and access it from the CRS. It stops working. I can not get the sub-report to come up. Or it opens another window like it is going to show the sub-report but I get the original report again.
My second question is how do I open a trouble ticket now that this has all moved to SAP?
Thanks for your help.
Jeff

As this isn't working in CRS you may want to re-post this to: BusinessObjects Enterprise Administration
www.service.sap.com would be a good place to go to get service

On Demand sub report not printing in IE and Other Browsers

Hi All,
We have developed Crystal report for our web application with version 13.0 and Visual Studio 2010.
When we run our web app in IIS report display fine in All web browser and when we print report in ActiveX mode in IE 9+ for main report it prints fine but if we print on demand sub report it not printing even a single page out of 2 or more than 2 page.
If on demand sub report has only one page then it will print in IE 9+ browser.
Even If we click on Export button on demand sub report easily export to pdf or any formate the issue while we print it.
It going to hanged while we print on demand sub report with more than one page.
Please help in this issue.
Also please let me know if you want more detail.

Not sure why you created two Discussions on the same issue? (CR on demand sub report goes hang in IE)
Locking this Discussion.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Error when opening a BW query with Crystal Reports

Hi all,
I am having problems when opening a BW query with Crystal Reports, the strange thing is that it only happens with
the bo user I have created. If I use a user that already exists and that has SAP_ALL authorization it works.
I don't know if this could be an authorizations issue, but I have created a role with all the authorizations stated in the manual.
The error I am getting is the following:
"An error occurred while generating a new report template. Error in UNKNOWN.RPT file"
Does anyone know what this could be?
Thanks

Well,
I cannot access the system now. But I think it is not an issue of authorization, because I assigned all the good user's role to the bo user,
and even with that, it still don't work.
Thanks

Back arrow does not work with SQL Server Reporting Services Reports. When one pages back from a sub report the back action appears to skip moving to the previous step. IE 8 works fine?

I have a SSRS report that has a parameter driven drop down list to select a catagory for a report to run a summary for the category in Report Manager. When the report runs there are links to a sub report with more detailed information about the category summary. Firefox runs everything correctly up to this point.
When I try to back arrow from the sub report Firefox skips the summary report page and reverts to the initial page where the sub category can be selected to run the summary report.
Can you help? IE8 works well with this but has severe spped issues with reports that contain multiple selection parameters. Firefox handles the multiple parameters very fast but has the page back issue.

I have a SSRS report that has a parameter driven drop down list to select a catagory for a report to run a summary for the category in Report Manager. When the report runs there are links to a sub report with more detailed information about the category summary. Firefox runs everything correctly up to this point.
When I try to back arrow from the sub report Firefox skips the summary report page and reverts to the initial page where the sub category can be selected to run the summary report.
Can you help? IE8 works well with this but has severe spped issues with reports that contain multiple selection parameters. Firefox handles the multiple parameters very fast but has the page back issue.

When sub-reports are exported or printed, then the complete report gets exported/printed instead of only the content of the sub-report.

I have got several (6-7) subreports in the m ain report. Several times client is interested in printing/exporting data of sub-report only for which when they try to export/print sub-report, entire report is getting export and print.
We have upgraded application from crystal 8.5 to crystal 2013 RAS API now. Earlier with crystal 8.5, client was able to export/print only sub-report.
It will be great if somebody can share his/her expertise with us.

Hi,
As per my knowledge, currently there are no APIs available to export only subreport.
See the RAS SDK dev guide and API Reference.
http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/xi4_rassdk_net_dg_en.zip
http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/xi4_rassdk_net_api_en.zip
Try the SAP Idea Place and log an enhancement request.
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

First group of the first sub report begins to be printed on the second page.

Post Author: gdumencu
CA Forum: General
All of the following check boxes are unchecked:
ReportProperties -> Respect Keep Group Together On First Page
Group Options -> Keep Group Together
Section expert - all sections of the report and sub reports -> Keep Group Together
Is there any other thing I missed that will determine Crystal Reports to begin printing the first group on the second page?
Thanks, G

Post Author: zxcvb
CA Forum: General
I did following and it worked for me-
Right click sub report in the main report. In format subreport uncheck Keep Together.

"Alias not found" when opening a non-alias folder with Spotlight

Good morning everyone,
I'm noticing a strange behaviour when browsing through the finder. When I go to a folder (for example, /Users/AeroCross/Dropbox) I have various subfolders. I press CmdShiftF (find by filename) to search for a folder (for example Dropbox/Work/Informs). When the folder "Today" appears in the serach results, I double-click it to enter, then this message appears: http://cl.ly/4wXm - notice that the folder "Informs" is NOT an alias (and there are no aliases around, neither, I don't use them).
It happens with any subfolder folder I search with Spotlight. Can anyone reproduce this problem? Anyone has a solition or something?
P.S: Fix alias does nothing. It just closes the dialog window and that's it. Either way, the error won't reproduce until a later time.

Yeah, there were some problems with this earlier, pre-Snow, but now it is a constant problem, and a very strange one. As I recall, the earlier problem happened with all sorts of things, not just folders. AFAIK the easiest work-around is to select the folder, then at the bottom of the search window you'll see the path to the selected item. Double click the folder there and it should open just fine. Also, very weirdly indeed, if you double click the folder it actually DOES open, but the error box appears on top of it, and when you dismiss it the Finder window returns to its previous state, however if you go to the Finder Go menu item, and select "Recent Folders" the folder you just opened but couldn't access is listed! You can access it just fine from there.
It happens with any subfolder folder I search with Spotlight.
I have not been able to determine what "rule" determines which folders won't open. Some folders returned in a search window will open just fine, others in the same search results window don't. Also, once you have opened the folder thru other means (using the path at the bottom of the window, or the Recent Folders menu), it will then open directly from the search window with a double click.
Francine
Francine
Schwieder

Firefox crashes when opening any Adobe pdf document from internet. This only seems to happens with firefox 6.0.2. Pls assist how to solve problem

Good day,
Please note Firefox is crashing every time I tried to open a pdf document I find in any internet webside. This is happening since I have installed Firefox 6.0.2. I temporarily solved the issue going back to Firefox 5. The problem is that my Mac installs automatically all the updates that might come from Firefox, including new or greater versions.... So, here I am again with Firefox 6.0.2 and not able to open Adobe pdf documents.....
Would you please kindly assist to fix this issue...? Please note I have systematically sent a report every time Firefox has crashed, so you might have quite a few by now!
Many thanks in advance for all your help and assistance.
Francesca.

* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
The preferences on which Reset is greyed (not available), are they appearing in Bold Text or Normal ??

My Canon MP620 just stopped printing text: it can print photos etc but when I send a word document (with a picture) it only prints the picture. Any ideas?

Hi Everyone:
I have a Canon MP620 printer connected directly into my Airport base station. So far it has worked perfectly - I can print any type of document over the network from my MacBook Pro.
Yesterday something weird happened. I have a resumé (as a word document) I was always printing but this time all that was printed was a photo and no text. I did a print preview and it looked fine. I converted to PDF and nothing was printed. I then created a brand new word document and again nothing was printed. I have no problem with images but for some strange reason no text can be printed. All that happens is that the paper goes through and comes out blank.
Any ideas?????
Thanks a lot in advace!

Hi,
Tried all the cleaning programmes and it still will not print...I am lost.

Memory full - error when open a Peoplesoft crystal report 9/10

Post Author: damisetty
CA Forum: General
Greetings!
We are gettign Memory Full error when open few of the delivered crystal reports. We are using Crystal 9 bundled with peoplesoft, i tried to open with Crystal 10, but same error.
Could any one help me out?
Thanks in advance.
Naga

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

Sub-Reports not working.

Hello,
I am using crystal reports xi-r2 I am having trouble getting an on-demand sub-report to work. After much trouble I am able to get the sub-report to work in the designer but as soon as I publish the report and access it from the CRS. It stops working. I can not get the sub-report to come up. Or it opens another window like it is going to show the sub-report but I get the original report again.
Thanks for your help.
Jeff

Hi Jeff,
Can you provide a more detailed description of how the report is created?
- Do you have groups in the report?
- Which section is the subreport sitting in?
- Is the subreport linked to the main report?
- When you refer to On-Demand subreport, do you mean you've enabled the check box for 'on-demand subreport' or did you enter an HTTP url. Please elaborate how you created the subreport.
- As a test, if you do not create an on-demand subreport and allow the subreport to display, does it show the correct data?
Regards,
Wallie

Hyperlink (Drill-Down) in a Sub-Report

Hi,
I have a report in which I am using on-demand sub-report.
In the Sub-report I added a working Hyperlink to one of the columns to drill-down to transaction details.
However when I run the report I can't drill from the Sub-report. The hyperlink inside of the Sub-report is not working.
Is there any work around to make this to work?
Thank you,
Tanya.

Hi Tanya,
Let's try breaking this down a little bit more granularly. I'd like to know what the formulas in the subreport shows and what the main report shows. It's always a possibility the subreport's formula is returning 0 and passing it properly to the main. So this will show that.
1) The formula in your subreport, just have it do:
WhilePrintingRecords;
shared numberVar Nar_Count;
Nar_Count:=Count ({Command.YTD_NARRATIVE});
Show/Unsuppress the subreport's Report Footer so we can see the formula.
2) Leave the formula in the main reports GF1 as:
WhilePrintingRecords;
shared numberVar Nar_Count;
Do you see a number in both formulas or do you see the number in the subreport but not the main report?
I want to see if the formula in the subreport is working and not just returning 0.
If the formula in the subreport works then I want to know what the formula in the main report is showing.
If this does work:
1) Change the formula in the subreport back to:
WhilePrintingRecords;
shared numberVar Nar_Count;
Nar_Count:=Count ({Command.YTD_NARRATIVE})+Count ({Command.PTD_NARRATIVE})
2) Leave the formula in the main report's GF1 as:
WhilePrintingRecords;
shared numberVar Nar_Count;
Again, what do you see in the subreport and the main report?
Good luck,
Brian

Set sub report Logon Info without prompting

I have a crystal report that i am displaying using a ReportSource from crystal enterprise server 10.
This report has On Demand Sub Reports in it. When a user clicks on the web viewer to view that sub report it prompts for Database logon information. How do i set this information server side so the user is not prompted?

I wanted to follow up on this question, since it was not properly answered. If you are using the enterprise SDK, and veing a report Stored on the server you must change the properties of the report on the server itself for what I needed to work.
Once the report is saved to crystal enterpise go into the report's properties.
go to Process->Database and set the following setting:
In Crystal 10 - Make sure 'Prompt the user for database logon when viewing' is
NOT checked.
In Crystal XI - under 'When viewing report:' make sure the radio button for
'Use same database logon as when report is run' is checked.
Also, the SDK has a 'Prompt on refresh' optoin when scheduling the report programmatically that you can set to false to make this work without having to change the base report in the crystal enterprise server. (This goes for Crysal XI and Crystal 10)

When opening a non on demand sub-report it is only printing portrait?

Similar Messages

Maybe you are looking for