When opening files "Not enough memory to load TIFF file."

Mac just had a new build of OSX 10.6.8.
Total memory 4gb of which over 3gb is free.
Open any image gives a memory error "Not enough memory to load TIFF file"

Open the linked tiff file(s) in photoshop, and resave with LZW Compression (OFF I Believe). I know you can place an lzw tiff adn usually works fine, but I believe i had this in the past and turned it off/chanegd the RLE settings and Illustrator was made happy. Also look for if the image is photoshop >> image >> 8 bits/channel.

Similar Messages

Not enough memory to load the tiff file

I did a search for this problem and there were two threads about it but I can't post to them. I think they are archived. Unfortunately, there was no answer to this problem in there.
The error "not enough memory to load tiff file" has been occuring in our shop on various computers with different resources. I believe that it has happened on our Mac as well. All are running Illustrator CS2 except the Mac which is running Illustrator CS3 and Leopard.
Has there been any progress on what the problem is? Has anyone found a solution that doesn't involve having to resave tif files as other formats to get them into the original Illustrator document? Or a solution that does not involve a huge work around?
I don't know the specs of all the computers in our shop but the one that I'm working on has the following specs:
Pentium 4, 2.8 GHz with 2.5 GB of RAM
Windows XP Pro Version 2002; service pack 3
Any help would be appreciated.
J.

Photo Scaling for Video
http://forums.adobe.com/thread/450798?tstart=0
-Too Large = Crash http://forums.adobe.com/thread/879967?tstart=0

Opening PSD File - Not Enough Memory

I created a sequence of images from Particle Illusion in a PSD format. When I open one of the images in Photoshop (CS3), it opens - no problem. When I try to open it in Illustrator CS3, I get the message "Not enough memory to place the file".

On Windows XP 64, opening PSD files with Illustrator CS3 does not seem to work.
What you can do to resolve this issue is to save the file as PNG in Photoshop. That can be opened in Illustrator and transprency is preserved.
www.revis3d.com

Not enough memory to place the file

hi when iam opening photoshop layered files at 300 dpi and having size 6x18 inches illustrator cs3 portable gives error message not enough memory to place the file and file is not opening ???

There's no such thing as an "Illustrator CS3 portable" version. What you have is an illegal torrent download. Any issues you experience may be due to the illegal copying of the software.

"not enough memory to place the file" error message

hello all,
running windows 7, illustrator cs3 on a pc.
trying to open or place psd files in illustrator and get the following message "not enough memory to place the file".
I've reset illustrator prefs, disabled "enable desktop connection", check scratch discs, etc.
Nothing seems to be addressing the problem, has anyone else run into this?

There's no such thing as an "Illustrator CS3 portable" version. What you have is an illegal torrent download. Any issues you experience may be due to the illegal copying of the software.

Illustrator CS5 Error - "Not enough memory to save the file"

Hey guys,
I'm experiencing difficulties in exporting website from .AI to .PSD using Illustrator CS5.1 under Windows7 Home Premium 64bit. The error message says "Not enough memory to save the file".
I can assure you that i've got enough memory for scratch disks and my computer is powerful enough to handle this operation. The funny thing is that i am able to export the very same .Ai file using Illustrator CS5.1 under Windows XP 32bit on different PC.
I've tried to find a solution online, but it gave no satisfying results so far. So, i think the problem comes from the operating system, but i don't know how to fix it... any suggestions?
Thanks, Steve.

Sad to say I'm running into the same problem with a 40KB file.....
(download the following file and use it)
http://upload.wikimedia.org/wikipedia/commons/8/8c/2.4_GHz_Wi-Fi_channels_%28802.11b%2Cg_W LAN%29.svg
File -> Open
Modify the file slightly:
doubleclick the image
remove the channel 14 info (the text block "14" & "2.484", the T shaped path, the dotted half circle path)
drag a square around the "Channel", "Center Frequency", "(GHz)" text blocks and hold left shift and press the left arrow until the selected items are tighter to the rest of the image
select the bold base line, grab the right middle point to shrink the line (dragging from right to the left) until 'intersect' shows up, then release
click the top left "Back One Level" arrow 2 times so that you are back to the top level (out of isolation mode)
File -> Export -> Choose PSD
Export Options (all default settings)
Color Model RGB
Medium (150ppi)
Write Layers
Preserve Text Editability
Maximum Editability
Antialias
Click OK.....
POOF! ERROR!
"Not enough memory to save the file"
note: saving as .ai file before exporting doesn't solve the problem
My Environment:
Adobe Illustrator 15.0.2
Win7x64 SP1
6GB free RAM (8GB installed)
55GB Free HDD space (256GB total, it's a SSD)
4GB pagefile
Please try the test method provided for yourself and advise, thank you

"Not Enough Memory To Load Samples..." hangs Logic

So I'm sitting here watching my life pass before me as the SBBOD spins and spins. This was the result of my loading an EXS instrument which, halfway through loading generated an error message, "Not enough memory to load samples...". When I clicked "OK" on that dialog box, the SBBOD appeared and continues to spin as I write this.
And spin...
And spin...
The song I'm working on has 30 active instruments, this one would have been #31.
Anyway, my disgruntled side is wondering if a professionally written application should actually hang upon determining that there isn't enough memory for an operation. Why can't it just have recovered gracefully? Helll, my Akai S1000 wouldn't hang when it ran out of memory... Meanwhile, my calmer wanting-to-get-back-to-work side would love to get some constructive suggestions as to how to prevent this from happening in the future (aside from turning on virtual memory for EXS, which is not an option for me).
Activity monitor reports that Logic is utilizing 3.06G of Real Memory, 3.51 of Virtual Memory.

Thanks Justin. Got any suggestions for an external app? This idea is venturing into virgin territory for me...
The issue, though, is not being able to know at load-time how much RAM any particular EXS instrument uses. It's possible to find out only afterwards how much it uses (by accessing the EXS Prefs panel and clicking on the Sample Storage menu. But doing that in and of itself is risky, as I've known this to also crash Logic). So really, I'd only know when to start using a ReWired app as a sampler after I crash Logic by trying to load up a "last straw" instance of EXS.
Hey, you're a programmer, right?! Could you write me a routine for Logic that would intercept the loading of a newly selected EXS instrument by first doing a calculation to see how much RAM is required by that instrument, and then reporting if there's enough available RAM to actually load it into? If there isn't enough RAM, the routine would then abort the load. Without crashing, of course. ;-)
Whaddya say? (I know the answer, but I just had to ask...)
-=iS=-

Illustrator CS3 - "Not enough memory to place the file." Help!!!???

I have a new machine running XP Pro 64. Intel i7 processor, 12 gb ram.
I am trying to place a fairly small Photoshop image (with layers) into Illustrator CS3. I have done this countless times with XP 32 bit os.
But now, I cannot place even a small Photoshop image into Illustrator... I keep getting the error "Not enough memory to place the file."
I tried the suggestion of 'right-clicking' the Illy launch icon and going to properties/compatibility and then selecting "Run this program in compatibility mode for..." and then I check marked Windows XP.
Someone else said this worked in Vista 64.....but it DID NOT work for XP 64.....dang it.
Any suggestions???
Thanks

On Mon, Oct 26, 2009 at 04:37:08PM -0600, Todd-sta uttered:
Well..... I just tried the same function on my 64 bit Leopard operating system on my MacBook Pro just for kicks. Worked flawlessly!!
So, why won't it work on XP 64 bit? Is this a case of 'the mac os is just better?"
Talk about flame bait -- You trying to start the platform wars again? ;-D
Can anyone tell me if they can place a Photoshop image from WINDOWS 7 64 bit OS into Illustrator without issue? We're talking 'PLACE' .... not paste.
Don't know about Windoze 7; but that operation works in Vista x64. XP x64 is
quite flaky at times. It was never finished IMHO.
Sure would like to know. I'd upgrade if it made the difference.
LOL
end

Not enough memory to save this file

hi ,
im doing a artwork with a size of 210" x 72" and 4 layers in total ( the size is actually half of the actual print size which is 420" by 144" ). But whenever i want to export the ai file to psd , the error prompting ' Not enough memory to save this file ' appears. I've changed my primary scratch disks frm Startup to C:\ ( which is ard 100gb ) but the error still exists. Is there anyone who could help me ? Need to send the works for print next week but i need to export this file to photoshop to do extra effects and changes.

theres around 88gb left on my drive and my ai file is juz 1.84mb.
the settings for export is as follows :
Resolution - 72dpi ( as my workfile is being done to a scale of 50% , i used a lower dpi )
Options - Write layers with max editability
Anti-alias unchecked
Embed ICC profile checked

"there is not enough memory to load this vi"

I have a rather large Labview build application (LV 2013). Sometimes it happens that immediatly after application start the application crashes showing the following error and afterwards a non-conclusive crashlog.
"Sometimes" means that it crashes around every 10th time, sometimes everytime. If it didn't crash at startup it won't crash during runtime anymore.
One problem is that the number of crashes depends on the computer (always Win 7 64bit ) the application is running on. On some computers it happens very rarely on the others every 2nd time.
The good thing is I already know the component where it comes from, which is the ftdi 2DXX library I'm calling. The bad thing is I don't know how to fix it. It looks to me like a memory corruption, but I I took every precaution regarding dll loading and data handling in labview.
Once I thought I fixed it by forcing recompile of all vi's of the project. It disappeared on the computer I was checking, but later appeared on another computer. Last time I thought I fixed it when I switch the dll calls to "run in any thread". It disppeared on the computer I was checking the problem on but now showed up on a different computer.
I'm running out of ideas. I already asked Labview support for help a while ago but they couldn't help me as well.

is there any solution?
I got also this error message. I restart Labview, made a backup of the file named in the error message, create a new VI und copied the content into this new one... I tried several things mentioned here and in the internet. The size of the vi is 1,1 MB, Labview 2014.
Strange is: I never open the mentioned VI in the error message, I have never changed or used it.
I extened a .ctl, there is an Enum and I added some items to this Enum. When I choose in the running Main.vi one of my added items, go to next, then a window appears and I want to cancel this window (there is a separate cancel button, not the x), then Labview is crashing, the attached error message is appearing. When I choose an item which exists before, everything is working fine. Any ideas what I can try?
Attachments:
not enough memory.png ‏14 KB

I bought imac new in 2007-it has safari. runs slow, the color disk shows during then. bought either leopard or snow leopard, but not enough memory to load it- any suggestions? i dont want to buy another computer! thx!

i bought imac new in 2007 (when it went towerless) it has safari. runs slow, the color disk shows during the. bought either leopard or snow leopard, it was in 2010. when i tried to load, it states not enough memory. any suggestions?? i just would like to get it a little more up to date

redrover443 wrote:
i do not know how much free space...i'm not at all computer oriented on the tech stuff.
so add RAM, then possibly upgrade to the leopard?
Open up your Finder window & check the bottom of the window in the middle. It will tell you how much HD space you have left.
===============
http://docs.info.apple.com/article.html?artnum=305454 Mac OS X 10.4: FileVault - "There isn't enough space on your hard disk..." alert
Empty the trash!
Open up your application folder & go through all your apps. Trash all the apps you no longer want and/or use.
An easier way to do this is to open the Application folder in list view & press the Command+j keys.
In the the dialog that appears, click the "This Window Only" button & the "Calculate All Sizes" check box.
Wait a bit until your file & folder sizes have all been calculated, then click the "Size" column to sort your apps from the fattest to the most anorexic.
Get rid of all your photo files you don't want and/or need. Same goes for those pics off the websites you downloaded (gifs, jpegs, etc.). Or transfer/move them all to a photo/movie storage site like ImageShack and Photobucket, 2 of the most popular FREE storage sites.
Get rid of all your video & music files you no longer view and/or listen too. Especially, if you already have the actual CD/DVDs or you can later redownload from a website. Or transfer them all to a FREE video/movies and/or music storage site.
Use Spotlight to make sure you got rid of everything. You can even trash directly from Spotlight!
Drag what you don't want and/or need to the trash. Better yet, download this neat little shareware app *demo* called AppZapper. It basically does all the work for you by not only trashing the apps but the apps preference files, caches & all its associated files.
Another software that does the above is AppDelete. Best of all this software is free!
Burn what you want and/or need onto CDs or DVDs. Not everyone has the luxury of purchasing an external HD and/or the system requirements for iCloud to store their "stuff.”
Dropbox is a free storage facility software.
You can check with your ISP to see if they offer *free* storage space. Most if not all do now-a-days. There are thousands if not millions of *free* storage facilities on the web also. Use your favorite search engine to search them out as they come in different storage sizes to fit your needs & wants.
Check for duplicate fonts.
Applications>Font Book
Select “All Fonts”
If you see any “black dots” next to any fonts this mean you have duplicates and/or multiple versions of these fonts.
To clean this up, select a “black dotted” font or the Apple + *click* to select multiple dotted fonts;
Edit>Resolve>Duplicates.
What the above does is turns off the duplicates & multiple version fonts. Not delete them.
More than likely the “extras” were installed by other programs and/or other users.
Clear out font caches
Use FontNuke. It does all the work for you. And, best of all it’s *FREE*.
Printer Drivers
Get rid of all the printer drivers you don’t need & use except the ones for your *current* printer(s)/scanner(s).
HD>Library>Printers Folder
If you accidently threw something out that you needed for your printer/scanner it can be easily obtained from the manufacturer’s website and/or from the CD that came w/the printer/scanner.
Garage Band
Has about 1GB of loops stored. Get rid of some some them. You surely don’t use, like and/or need them all.
HD>Library>Audio/Apple Loops>Apple>Apple Loops For GarageBand
Or just get rid of the Garage Band app altogether if you don’t use it.
Get rid of extra languages
Strip your computer down to your “native” tongue.
You can do this with a *FREE* utility called Monolingual. Another app that apparently does all the work for you. I’ve never used it. However, a lot of users here swear by & recommend it highly.
However, there is a warning for *native English speakers*. Make sure you keep BOTH English and English (United States).
Other Resources:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Slimming your hard drive
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.

Photoshop CS2 Cannot read PNG files--"Not Enough Memory"

Hi! I have a bit of a problem. I've scoured the interwebs for days but can't find a solution.
My copy of PSCS2 was able to open PNGs in the past, but it just up and decided it doesn't want to anymore. I'm serious--I can't think of any major overhaul or anything I did to cause it, but now it won't read them correctly. It says there's "not enough memory," which doesn't really make sense, when I have a Macbook Pro and nothing running in the background. On top of that, the particular files I've been trying to open are barely 100kb. I've used canvases upwards of ten thousand square pixels in dimension with no problem.
This is with any PNG file. It's not an "incorrect extension" problem, because I made these files and just need to reopen them to edit things.
Here are some screenshots that show what's been happening; nothing exciting, but just in case someone notices something I don't:
That's the picture I want to open.
And that's what pops up.
:/ I'm a little dumbfounded. Halp?

Now, this is strange.
I restarted my computer and now the message has changed--to a simple one, but albeit still confusing.
Sigh.
I didn't do anything but restart my computer.

Can't open Excel - not enough memory

I recently converted files from a PC over to this mac by using an external hard drive. Among other things I don't quite know how to do, I get an error message-not enough memory- when trying to open excel. Word works fine. It is Microsoft 2007. Checked memory on disk and it is far from full. Please help!

HI and welcome.....
I get an error message-not enough memory- when trying to open excel.
Open System Profiler (Applications / Utilities). Under Hardware you can see how much RAM (memory is installed)
And make sure there is sufficient space on the startup disk. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
Carolyn

Recovery EUL from EEX file - Not enough memory

Hi,
I have the following problem.
I need to recover the EUL from a. EEx file.
At the time of the import and 65 porcient, in step 3/4 an error "Not enough memory". and aborts
The. Ex has a size of 2GB
Anyone have idea why this happens?
thank you very much

Hello
Your problem is exacltly as described, you are out of memory. Presumably you are logging in to Discoverer Admin and running the import from within the tool? Make sure you have no other applications open and make sure your machine has the maximum amount of memory installed as you can. If using XP you will need to make sure you have 4GB RAM, although XP can only address 3.5 GB.
If this doesn't work then try doing the install from either the DOS command line or the Java command line. These have a much smaller footprint and I have known several instances where Discoverer Admin ran out of memory only for the command line to load it ok.
Hope this helps
Michael

Problems opening outline: Not enough memory available

Dear all,
since about 3 or 4 weeks I have problems with opening an outline in EAS console: After a double klick on the outline and about 1 minute waiting the following message pops up: "There is not enough memory available on the Administration Server to open this outline." If I try to open the outline in "view mode" everything works fine. I dont know where the problem is - I have restarted the whole system, all other applications/databases are down - where is the memory?
Does anybody know this problem? How can I trace it? How can I see/change memory settings? We are working with Oracle Application Server on Windows NT as container for APS, HSS, AAS (EAS). Essbase Analytic Server is installed and running on HP UX.
Thanks in advance!
Regards
André

This wouldn't be an ASO database by any chance, would it?
Because if it is, you're likely seeing the effects of a fragmented outline.
It seems awfully big for the number of members you are describing.
Take a look at this thread: Re: ASO too large for techniques on how to get around the ASO outline fragmentation issue.
It might at least be worth trying to build the dimensions in a new database and see if the error occurs. If it does not (as this will be a fresh database, it won't be fragmented) you have pretty convincing proof that the issue is related to ASO outline fragmentation.
Regards,
Cameron Lackpour

When opening files "Not enough memory to load TIFF file."

Similar Messages

Maybe you are looking for