When opening image in PS, Lightroom won't open version with LR adjustments

When I right click on a photo and select "edit images in Photoshop," then choose "edit a copy with LR adjustments," it opens in photoshop WITHOUT the lightroom adjustments! I've had this happen in the past, but the problem would always clear up if I restarted Lightroom or my computer. But now, after restarting both, it's still doing the same thing. I even downloaded and installed the latest LR version, and still the same problem. HELP!!!!!

the words i was thinking of was "render in Lightroom".
Julieanne has some other great LR-PS tips also. some new to me so I will better look again
Lightroom 4 - Moving Between Lightroom 4 and Photoshop | Getting Started with Adobe Photoshop Lightroom 4 | Adobe TV
http://tv.adobe.com/watch/getting-started-with-adobe-photoshop-lightroom-5/lightroom-5-mov ing-between-lightroom-and-photoshop/
hope that helps

Similar Messages

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!

Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!
- Tried to Reset the preference with CTRL + Click.
- It's just new clean install didn't do anything with it yet.
- Windows 8.
Any help?

Just that one project, or any project? Can you create new projects?

Photoshop CS6 (Mac) crashes when opening files with type or using the type tool

Hi,
Photoshop CS6 keeps crashing when using the type tool or when opening files with type on it. I've quit suitcase, disabled the suitcase plug-in, reset the preferences in Photoshop there's no crash report coming up either the application just dies! I am currently trying a system restore from time machine to see if that works!. Any other suggestions would be greatly appreciated.
Many thanks
Olly

http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html

Disable compatibility setting diablog when open spaces with ie8 and ie9

dear
im developing webcenter spaces portal
when i open it with firefox and chrome everything seems to be ok but when open it with ie8 or ie9 compatibility view a popup dialog appears say that :
the current compatibility view is not supported .disable compatibility view before running this web page.
i need to prevent or hide this popup because customers asked me to do
any suggestions its urgent
best regards

Hi.
Don't know about ADF 11g R2
However with ADF 11g R1 11.1.1.6 exists a patch and a web.xml context param to solve it.
Applying patch and setting next context param in web.xml is solved:
<context-param>
<param-name>oracle.adf.view.rich.HIDE_UNSUPPORTED_BROWSER_ALERTS</param-name>
<param-value>IECompatibilityModes</param-value>
</context-param>Don't know if it runs in ADF 11g R2 apps.
Regards.

SAP DMS : Error when opening document with ECL control: INVALID_DATA

We are receiving following error while try to view .FAX file through SAP Document viewer
"2D viewer - Unable to opend Document"
"Error when opening document with ECL control: INVALID_DATA"
Appreciate your quick effort.
Thanks,
Sam.

Yes, We have checked in both ways, I have also followed other threads on the same issue
But not able to find the solution for the issue. We are facing the issue when we are using files scannned by Kodak Scanner i1420 in tiff format.
But If I will attach any other tiff files from directory then It can viewed through SAP Document Viewer.
I appreaciate your help in this regards.
Thanks,
Sam,

Dreamweaver very slow when opening files with external links

Is there any way to fix Dreamweaver CS5 (Windows 7, 64bit) when opening files with external references?
For example, I have a very simple CSS file, and toward the top the file has a line that says:
@import url("https://fonts.googleapis.com/css?family=Ubuntu:500,700");
This causes the file to take around 20 seconds to open in DW. If I comment out the line or remove it, the file opens almost instantly. This behaviour is also present in files that contain an SSI.
DW often crashes before being able to open the file and I need to restart the app.
Can I disable DW from attempting to load the references?? It's obviously what is causing the issue IMO and would love to make DW workable again!

"Enable Related Files" isn't the fix for this issue. It's slightly different - I wanted to still load related files, but only the ones local to the file I was editing.
The fix was to use DW's Resolve To IP Address feature. It required adding a registry value - it fixed the issue straight away
This Adobe support doc helped: http://kb2.adobe.com/cps/887/cpsid_88742.html

Background music is lost when opening pps with keynote

When I get an email pps with music. I'm able to open it with keynote, but unfortunately I lose the background music.
How can I fix this problem ?
Thanks,

What format is the music in? If it's some Windows only format, then it won't play in Keynote.

Error when opening page with the web browser activex

I have downloaded the example for using the web browser activeX component to display a web page. It basically works, but it keeps returning an error (from NI's web site) that I don't see when opening the site from IE. The message I get is:
Are there things that need to be initialized when calling the browser in this way?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Mike,
It looks like ni.com is not supplying that particular console object which is causing an issue with the embedded instance of IE9. Every other website I've tried works correctly. I've looked around the ActiveX methods to intercept and ignore this error, but I haven't found anything yet.
For others' reference, here is the link to the example:
https://decibel.ni.com/content/docs/DOC-2042
Karl G.
Applications Engineer
ni.com/support

LabVIEW load error code 3 when opening VI with LabVIEW 2010

I got this error when I try to open a VI saved in 8.6.1 with LabVIEW 2009 and 2010.
The VI open correctly with 8.6.1.
It's appening with only one VI. All other VIs are OK.
Anyone experience this problem?
What can I do to get over this bug?
Dany
Dany Allard

Same issue here too. Could anyone help me to open it?
Attachments:
Peak Detector.vi ‏34 KB

When open forms with IE7,meet an error

today when I opened forms with IE7, IE could not open forms again, but this time IE did not crash .
MY IE version is 7.0.5730.13
EBS version is 11.5.10.
How to solve this?? it has bothered me for a day
Thanks in advanced.

Hi,
Was this working before? If yes, any changes have been done recently?
Can you reproduce the issue from other clients or it is just specific to your machine?
What is the error you get when you try to open the forms?
Please make sure you meet all the requirements as per (Note: 285218.1 - Recommended Browsers for Oracle E-Business Suite 11i).
Thanks,
Hussein

Mail crashes when opening mail with attachments (10.5.6 problem?)

Hello, and thanks in advance.
My Mail program is crashing when opening email that is "larger" in size or has attachments embedded in the messages. I think this problem began only after I installed the 10.5.6 update. I don't have any third party plug ins, and I ran Mail Update 10.5.6 without improvement.
Does anyone have any ideas as to how I can fix this?
Thank you!

It might be worth running Disk Utilities and then Repair Disk Permissions to see if that resolves the problem.
Chris

Lightroom has a hard time with local adjustments:

Local adjustments: Spotting / Cloning / Healing Brush, Adjustmenst Brush, Graduated filter
I posted the piece below as a response to thaehn’s post “Lightroom freezes on Dust Spot Removal” but I thought the topic is important enough to warrant its own post.
This in advance: I'm running WIN XP SP4 with all available patches; have 4 GB of RAM; have a dual-core processor at 3 GB.
Apart from my drive C, I have two internal hard drives in Raid 0 configuration (thus they show up as one drive). I also have an external hard drive that's in Raid 1 ( "mirroring') and is connected by fire-wire 400.
Yes, LR "freezes" when using the dust spot tool and also when using the adjustment brush or - but to a lesser degree - when using the grad filter.
My observation though is that it's not a true "freezing", because if I wait long enough LR starts working again. So when using these tools, LR gets extremely busy und just doesn't have enough resources left to respond to further commands right away - but it "stores" the comands and acts on them eventually.
If I turn on my task manager I observe the following when using these tools: the CPU gets extremely busy (i.e. the green bar is at 100%) while the RAM usage is high but not to the max. The "freezes" occur when and as long the CPU works at 100%. If the CPU is below 100% LR responds sluggish and the response is normal again when eventually the CPU usage is at 0%.
Also, in my observation, this behaviour of LR is compounding, i.e. the wait-times for my CPU to get back to 0 are increasing, the longer I work with these tools or the more photos I work on. Re-starting LR does not bring change: the behaviour establishes itself when using the tools again. It is as if LR needs to do some work in the background and that this background work piles up the longer I work in LR.
I am not a software or hardware specialist, so the following observations are somewhat subjective and not really quantifiable.
In Photoshop I observed a similar behaviour (although never as bad) when working on files of 500 MB and above. It was particularly bad when working on photos residing on my external RAID 1 hard drive. I had a hunch that it might have to do with the reading and writing from a drive that a) is external and b) is in RAID 1. It is known that RAID 1 has slower writing (and also reading) speeds than RAID 0 (or no RAID at all). So in Photoshop I managed to cut down on the unresponsiveness by moving large files to my internal RAID 0 hard drive and working from there.
From this experience I come to the assumption that some of the "busy-ness" in LR (or of the CPU) is due to reading/writing to/from the hard drive.
To test this assumption for LR, I moved some photos from my external (RAID 1) to my internal (RAID 0) hard drive and did some "intensive" work: first some "fancy" lens correction, then a few grad filters, and a "final touch" with the adjustment brush. I thought that LR could handle these tasks somewhat better when the photos were on the internal drive - so some of the "sluggishness" or " freezing" is due to the reading/writing from/to the hard drive.
Acually I cannot explain why this should be so: In my naivete I thought LR writes everything only into the catalog (?), that - by the way - is on my internal RAID 0 drive.
I think it would be good if Adobe could look into this and maybe give us some recommendations, just as they do for Photoshop by saying that the scratch disk should be on a different drive than Photoshop.
But it seems also that local adjustments - spotting, adj. brush. etc - are a very high "number-crunching" business for LR - independent of where the photo is located on the drive. (Interestingly the grad filter is not as bad as the adjustment brush). The clone-tool in Photoshop hardly registers on my CPU and if at all only with a very short spike, while the clone tool in LR sends the CPU through the roof for 10 to 30 seconds- even when the photo in question is on the internal drive.
I'm sure loots of people will now tell me that this is due to the difference between pixel-based adjustment and non-pixel-based ones. OK, I acknowledge that. But still ...
It seems some guys are still in denial about this (or maybe they have two quad processors and 16 GB of RAM):
But it's a fact: LR has a hard time with localized adjustments. There must be by now 100's of complaints to that respect, and that can't be dismissed by blaming it on the hardware specs alone.
I just hope Adobe is working on that.
LR3 is a fantastic program that I would not want to work without. Often I have to work on a lot of photos with a very tight deadline. Without LR it would be impossible.
Thank you,
ErnstK

You are right Samoreen.
I posted my above message in July 2010 and this topic has been re-opened by Adobe under the thread Lightroom 3.3 Performance Feedback
I think it would be best if everybody would post their concerns only under this thread.
Otherwise we'd have two different threads for the same issue.
So let's close this one here.
WW

Annoying behavior when opening mail with embedded images

When I open an email that have embedded images within it, I am finding that Mail is always seizing control of the scrolling and is forcing the mail message to return to the top of the page. This happens while I am scrolling though the message and repeats until the message is fully loaded. Does anyone know if there is a work-around or solution to this problem? I find it very annoying, especially if it's a message I don't really care about.
Thanks!

I am having the same problem, and would love to know an answer for this, too.

Weird CS4 hanging issue in windows Vista when opening files with PS already loaded

I just installed the demo. I have a dual monitor setup running Windows Vista Ultimate x64 with 8GB ram ...
It appears I have both the 32bit and 64bit versions of PS CS4 installed. If I open either of these apps, then choose say a jpg on my desktop, right-click in windows, choose, 'open with' and select 'Adobe Photoshop CS4', then PS hangs - period. After a while, clicking the title bar of the app (which is a kind of menu bar in this version) causes it to return to the old look windows title bar where it shows my image name and the zoom etc, but with the usual (Not Responding) at the end of the title bar text!
It does this no matter which version (32 or 64bit) is presently loaded. It also does it if I have CS4 loaded and I select 'Edit with Photoshop' in Lightroom 2.1 (my main app which is configured to output files in 16bit PSD format).
Another weird quirk I found in CS4 - if I select 'Help', 'System Info' it displays the info on my second monitor, not my first! I figure this by the screen res shown as my second monitor (monitor 3 in Vista) is only running 1280x1024. Not sure if this has an effect on which monitor profile is used by PS - I would hope not as my 1st monitor is my calibrated one!
Thanks, Paul

Freeagent - I just did some more testing and figured the issue I think! I had selected 'Enable OpenGL Drawing' in Performance preferences and even though I have the very latest nVidia driver (downloaded today) this still causes this issue!
One issue I have noticed though since figuring how to fix this - I have 2 monitors and on the left one I have the panels un-docked and laid out neatly on the desktop. I then have the main PS window with it's height shrunk as slim as possible and filling the top width of my 2nd monitor. In CS3 when I open an image, it generally remembers where the last one opened and uses the same place - this includes if I had the image in its own window on my main monitor. In CS4, it seems to want to open them in tabbed dialogs within the PS main window and for some reason they are on minimal magnification, so I need to drag the tab over to my main monitor every time and zoom in to get a decent size displayed.
Is there anywhere to configure where you want it to open images?
Thanks, Paul

When opening image in PS, Lightroom won't open version with LR adjustments

Similar Messages

Maybe you are looking for