When opening my vi file on lab view 6 it asks for AI read.vi

Ok so I installed version 6 of lab view on to my laptop because apparantly that's what the program i would like to run was written in. After finally downloading all the files and installing them, I get this message where it tries to locate the file AI Read. vi and AI Clear.vi
I have no idea where to get them from
Message Edited by problem finding "AI Read.vi" o on 09-21-2009 04:37 PM

They are part of the Traditional DAQ driver. You need to install that after installing LabVIEW.
By the way, why didn't you come up with a more creative login name rather than just a statement of your current issue? If you ever need to post again to the forums, that login name is going to look rather silly.

Similar Messages

Office 2013 applications cannot be made to show the "Documents" folder when opening and saving files

(Windows Server 2012R2 and Windows 8.1 PRO)
We are redirecting the user's "Documents" folder to the network (using Folder Redirection). The OS hides this fact however, and most applications simply see the "Documents" folder when opening or saving files, including Office 2003.
Office 2013 however displays the actual path, which in this case is:
\\sever1\redirect$\username\documents
Even if you forcibly set the "Default local file location:" in the Options Save area to the 'Documents' folder in, say, Word, Word immediately converts the local path to the network path.
Is there anyway to get Office 2013 to follow the virtual path? All of other apps follow it and expose the users only to "Documents".
Thank you so much.
Dana

There's nothing in my FAQ concerning screen savers, so I'm unsure why you decided to take that approach. From your description, it looks like you only tried a few of the suggestions before throwing in the towel. That's fine, it's your call.
I don't have the problems you described with 10.4.7. Usually when folks have problems after an update, these are caused by either installing an update on an already-corrutped system or they've installed third-party applications or hardware that have been rendered incompatible by the update.
Before installing software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Problem occurring when opening and saving files in AI SC5 with Windows 7

Hi, I ‘am a Graphic Designer and first time working in UAE Windows 7 is basically the only OS here. My PC is:
HP Elite 7000
Intel® Core™ i5 CPU 2.67GHz
4GB RAM
32-bit
Now to the problem, not that knowledgeable in IT stuff so here goes:
1. Problem occurring when opening and saving files in AI SC5 with Windows 7. (You will actually see a “Not Responding” word coming out while opening and saving files, whether small or large files)
2. Locked layers occasionally are moved accidentally.(Working on multiple layers is normal so we need to lock it specially the once on top. But there are times I still manage to select locked layers)
3. After typing and locking the text, pressing “V” for the arrow key shortcut is still added to the text that is locked. (After typing I lock the text layer with my mouse and Press “V” to activate the arrow key… yes the arrow key is activated but the text is still typing the actual keyboard pressed)
I’ve only use the brand new PC and installer for a month now. Not sure if this is compatibility issues or something else I’m not aware of.
Thanks in advance to people that will reply.
Cheers!!!

Well I’m still wondering if it is compatibility issues because I’m also having problem with Photoshop CS5. These 3 are all bought at the same time (PC, Illustrator and Photoshop installers). The problem I’m having in Photoshop is not that too important, every time I Ctrl+O to view files, all PSD are shown in white paper like icons, no preview, and saving as well.
Or I just purchased a corrupted or pirated installers… Adobe updates are done every time I’m prompted.

Adobe bridges crashes when opening a video file

Adobe bridges crashes when opening a video file. i can open and view photos but not .mov files or any other video file

Just that one project, or any project? Can you create new projects?

Recently, when opening some websites, I can't view the page and now must open them with google chrome or internet explorer in order to view them

Recently, when opening some websites, I can't view the page and now must open them with google chrome or internet explorer in order to view them

Hi headshot, <br /> Sorry you are having problems.
Are you seeing any error message or notification ? <br />If so what ?
If the page fails to load try clearing Reloading with the Ctrl F5 shortcut to force loading without the old new cached files. If that does not help try cache and clearing cookies for that site.
* Also see [[Websites don't load - troubleshoot and fix error messages]]
* [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

[SOLVED] KDE switches activities when opening a new File

First off, I've been using KDE Plasma Workspaces for a few months now, and for the most part am largely satisfied. Thanks to both the developers of KDE and to the contributors on Arch who made setting everything up a breeze.
One thing that does annoy me however is how it switches Activities when opening a new file, if the default application already has a running instance. For instance, say I have one Activity which I am using as a development environment and have Kate open to view source. Now I switch to a second Activity where I am working on editing style sheets for my web page and again wish to use Kate. If I open Dolphin and click on one of my style sheets (launching Kate as the default editor) I will be switched back to my first Activity and have the style sheet opened in the already running instance of Kate.
To me this behavior is not ideal, I would rather have the DE spawn a new instance of kate for that Activity. I've perused through some of the settings options but haven't seen anything obvious.
Last edited by brewlius_cesar (2013-08-14 10:29:32)

Thanks for the response schmidtbag, but these are both suggestions for opening a file in an existing instance of Kate, when I am looking to instead spawn a new instance (at least for the current Activity). Also, these suggestions are specific to Kate, where I would like this behavior to extend across KDE.
Maybe I am just making a big fuss over nothing, but for me it seems more appropriate to spawn a new instance of a program if I click on a file from a file browser, such as Dolphin. If I wanted to open a file in an already running instance of a program I would use Ctrl+O from that program, or drag the file over to the program as schmidtbag suggested.
I'm thinking about reposting over at kde.org, I'll be sure to follow up back over here, no matter what the outcome is.

Error when opening table container file keydb read only

Hi Guys,
We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
FKD-00070 Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
ERROR 2008-06-04 20:10:56.843
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
Please help
Regards,
Santosh

Further info
keydb.xml is empty and the directory has got write access for everyone
regards
Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM

Adobe reader XI crash and hangs when open the pdf file

After update the adobe reader xi 11.0.10, the reader always crashes and hangs when open the pdf file. Please help me how to do.

Ben Leung wrote:
HThis situation is started after I clear the pop up advertisement.
What kind of advertisement? In Adobe Reader? Can you post a screenshot of that: https://forums.adobe.com/thread/1070933
Regarding the crash, can you try disabling Protected Mode through the registry: download, unzip, then run the registry script https://files.acrobat.com/a/preview/49eeb48b-07c5-4502-984c-8a25259914fa

Accept the enduser license agreement when opening a pdf file in the internet

I have launched adobe reader when opening a pdf file in the internet i get the following error message
Bevor proceeding ou must first launch adobe Acrobat and accept the Enduser license agreement
am user of a mac book pro

Kaliber wrote:
Before proceeding you must first launch Adobe Acrobat and accept the Enduser license agreement.
And, did you do that? The message will no longer occur once you opened Adobe Reader & accept the EULA.

When opening a msword file wit .doc extension i get an error message: import error. The file format is not valid

when opening a msword file with .doc extension i get an error message: import error. The file format is not valid

Looks like. I tried in the TextEdit format tab to set all the combinations while opening the file, like plain text, rtf and html without success. Always I get the same signs.

Why does IE crash when opening a pdf file ?

Why does IE crash when opening a pdf file ?

I think this is done by the browser when it is saving a temporary file and there's already a file with that exact name in the temp folder.

Missing fonts warning when opening a Keynote file

I'm using Keynote 2.0.2 on a Mini Mac. Having searched for an answer to the ubiquitous "Missing Font" problem when opening a Keynote file, I was wondering if upgrading to the latest version would solve this problem. Unless it does, we would have to think twice about upgrading the software. A lot of users seem to have the problem with version 3 too. Does anyone have a solution to this? The presentation runs perfectly well, but the warning message is annoying and doesn't look nice when presenting to clients. HELP!
1.42 GHz Mac Mini PPC G4 Mac OS X (10.4.8) 1GB DDR SDRAM

I've experience this same problem multiple times. There is a way to get rid of the troublesome font, thereby getting rid of the annoying message. I may be glossing over a step or two, but it goes something like this:
(1) In the Finder, right click on the Keynote file and select "Show Package Contents"
(2)Locate the index.apxl.gz file and open it. The file exands -- then open the index.apxl file with Textedit (or Word). Throw away the gz file.
(3) Do a search and replace -- find all instances of the troublesome font name and replace it with a non-troublesome font name, such as GillSans
(4) Close the text file.
Opening the Keynote file should now proceed normally. Note: Better practice this on a dummy file until you are sure everything works. I imagine that if you muck up the index file that the orignial Keynote file might be toast!
Rob
Black Macbook Mac OS X (10.4.7)

FM GUI_UPLOAD gives PC036 "Error when opening the download file".

Dear all
I'm having a problem with a particular PC.
A program which calls FM GUI_UPLOAD gives the error PC036 "Error when opening the download file".
The file we are trying to upload is a text file, with tab delimiter.
If the same user executes the same program from another PCs, it works fine.
If another user executes the program in the "problematic" PC, it gives the error.
So, the problem is PC-related.
I checked SAP GUI Codepage, and was the same as other PCs.
I cheched regional configuration, and was also the same as other PCs.
The operating system is Windows XP, and the SAP GUI version is 7.10, File version 7100.2.7.3077, Build 967944 , Patch level 7.
SAP version is ECC6.
I searched across forums, SAP note, and the web, but I couldn't find anything.
I would be grateful if someone could give me ideas.
Thanks in advance
Jordi

Hello. The user accounts are have same privilegies (like both are "Power users")? Also the file system are the same in both PC NTFS or FAT32 (today i'm find FAT32 in enterprise ) If NTFS may be some Domain politics are not allow to save file correctly, or space are not enough....Try check this first...Regards.

Adobe Premiere CC crashes when opening a project file .... error 3697 . [was:Adobe Premiere CC]

Adobe Premiere CC crashes when opening a project file .... error 3697 .... have to close application with Task Manager.... media files open separately OK

Just that one project, or any project? Can you create new projects?

When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
I store my PSD files adjacent to the original RAW file from which it was derived.
If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
How can I control which Photoshop will open a file I select when opening it through Bridge?.

Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

When opening my vi file on lab view 6 it asks for AI read.vi

Similar Messages

Maybe you are looking for