When opening several different websites (but not all), it says "landing (GIF Image, 1x1 pixels) on the tab and it won't load the website. I recently installed Kaspersky & also updated to newest Firefox.

I recently installed Kaspersky & also updated to newest Firefox. This doesn't happen on the other computers I loaded Kaspersky on. I am on Windows Vista with this computer (the others have XP or 7)

But I can't... find... it... It's not there.
Unless you're talking about the entire Mozilla Firefox folder (which isn't what the thing you copied says,) there is no installation folder.

Similar Messages

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • If I try and follow a link from another website to open another I get awclick.php (GIF Image 1x1) pixels in a new tab instead of the web page I want.

    I was trying to open a website as a link from another website and I get a new tab that says
    awclick.php(GIF Image 1x1 pixels)
    I can open the website without clicking on a link to it by just typing in the address but as this is a cash back site I am linking from it doesn't help!

    You're welcome

  • When i click on certain websites i get this error (GIF IMAGE,1X1 PIXELS)

    when i link on various websites this is the error i get (GIF IMAGE,1X1 PIXELS)

    Some firewalls like Kaspersky can block content and send a 1x1 GIF image instead.
    Kaspersky: Protection > Firewall > Filtration system: disable the "Banner Ad Blocker"
    See:
    * https://support.mozilla.com/kb/Configuring+Kaspersky+Internet+Security
    * https://support.mozilla.com/kb/Firewalls

  • How do I stop getting aclk (GIF image,1x1 pixels) when selecting some pages

    How do I stop getting aclk (GIF image,1x1 pixels) when selecting some pages
    == This happened ==
    Not sure how often
    == opening some pages

    It is Kaspersky that is doing that. It intercepts the content and passes that image to Firefox instead of the real content. You should complain on the Kaspersky forum about this if you disagree with the decision made by Kaspersky to send such an image in this case.
    You can look at Adblock Plus instead.
    * Adblock Plus: https://addons.mozilla.org/firefox/addon/adblock-plus/
    You need to subscribe to a Filter list (e.g. the EasyList).
    * http://adblockplus.org/en/subscriptions
    * http://adblockplus.org/en/getting_started

  • My WiFi signal is good but I can't connect to the Internet and it's still loading the server

    My WiFi signal is good but I can't connect to the Internet and it's still loading the server. How can I fix this or make the server connect faster?

    try:
    iOS: Troubleshooting Wi-Fi networks and connections

  • How can I access my iCloud email account when I don't remember the password and Apple won't accept the answer to my security question?

    I set up an email account with " @me.com". I get a wrong password message when I try to log in. When I try to change my password I get an INcorrect answer message to the security question I'm asked my birth date so I know I have it right, unless I did a typo when I set up the account. When I choose email me the reset password lnk I cannot retrieve the email because it won't accept the password. I wanted to justemail Apple for instructions but cannot find an email address for that. Any help would be appreciated.

    I tried that without any luck. I was hoping I could get Apple to reset it for me or delete the account so I could recreate it or at least tell me what is listed as my birth date, the security question answer.

  • Since upgrading to v6, I have lost audio on many websites. but not all.

    YouTube and Pandora specifically. the Video plays properly, but not audit. I have uninstalled FF, along with addons and plugins, and then reinstalled. still have the same issue. Using chrome or (blech) IE, the media plays correctly.
    i downloaded latest versions of plugins and extensions as needed. for the reinstall. (did it twice BTW).
    Im suspicious of some leftover registry key issues. but not knowing which ones to edit, I aint going in there yet!
    Any ideas and help are GREATLY appreciated!

    Not sure what you mean, Ernie? All my libraries are back where they were before the install on an external Firewire disk. The only difference is it resides one folder deeper than previously.
    Aperture and the libraries are functioning as normal, but resources like the iTunes music library is unavailable for use when making a slideshow, for example. Clicking on the music button in Slideshow creator opens Aperture Audio, with no link to iTunes visible. Even the Aperture Help menu doesn't open Aperture Help. And iPhoto Browser shows nothing available.

  • Works when opened in Acrobat 9 but not in IE ?

    I'm trying to rewrite a plug-in that reads data from an external system using a COM component and it works just great when opened in Acrobat 9 pro, but when I open the pdf in Internet Explorer (on the same computer) I can see that the plugin is activated OK but all connections to the other system just doesn't return anything.
    CoCreateInstanceEx returns OK as if everything is working as planned, no exceptions are thrown .. just nothing?!
    Is Acrobat 9 pro somehow sandboxed when inside the IE window or is it because my plugin still isn't signed?
    The old plug-in that I am rewriting works in both IE8 and IE6 but with Acrobat 4, so it isn't IE that is limiting the plug-in.
    thanks
    Ulrik

    Yes I do write both debug and error messages to a log file.
    I did further testing and found that it must be somewhere else the problem is because the object returned by CoCreateInstanceEx works just before the function returns.
    What are the differences between running a plug-in in Acrobat 9 inside and outside IE? Like I have to get the AVDoc from a callback (AVDocDidOpen) function because AVAppGetActiveDoc() doesn't work in IE (external window)

  • Can open some web pages but not all including bookmarked ones

    safari acting strange - not allowing me to open all websites i usually vists just a random few. connection ok as i can send and get emails as usual... explorer behaving in the same way
    advise - as always - appreciated
    k x

    Greetings Kate,
    Have you tried emptying the cache? Or second, resetting Safari, which will take out all your cookies and other caches. If this doesnt work, perhaps use OnyX (free from the Apple download site under your Apple menu) to repair permissions, and deep clean caches (users and kernel) and repair permissions.
    Let us know what happens..
    iMac G5 17" Display   Mac OS X (10.4.3)   1.5 MB Memory

  • "An error (1502) occurred during the action Open." when opening original .VSD files, but NOT copies!?

    We have a weird situation we're trying to troubleshoot for quite a while: We have multiple .vsd files stored on our network in DFS shares.. We have multiple users who cannot open the files, when they try by navigating to the file and double-clicking it,
    they get "An error (1502) occurred during the action Open. File not found"
    However, if they copy and paste the file to the same exact network folder, THAT file they can open with no problem!
    The problem is very bizarre. I've checked obvious things such as file/folder permissions, versions of Visio installed, things in common between people who can and can't open the files.. I even did some testing today with some strange results...
    Windows 7 x64 machine with Visio 2010 Pro installed (x86):
    1. Opened file by double-clicking it in explorer, "Got the 1502 error"
    2. Tried it again, this time I just get "File not found"
    3. Opened Vizio, did a File --> Open --> navigated to the file and opened it that way... 1502 error.
    4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.
    5. Closed the copy, tried to open the original, still get file not found / error 1502.
    The file does exist, it IS there.. sometimes the user just copies it to their local desktop (well, it's not really local, it's redirected) and it opens fine there.. other users email themselves a copy of the file and then open it that way.. it works for
    some, not for others.. and there's no discernible pattern yet to identify who this is affecting. Anyone have any ideas?
    -Keith
    -Keith Elkin

    Hi,
    Based on the error message, the issue may be caused by the Visio file is occupied by some other program in DFS.
    >>4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.<< If you did this step, the Visio file would rename in the same folder, like file1.vsd. Thus, it opened well.
    Thus, I recommend you check the file's status in computer management in DFS server, see the below image:
    If the affected Visio files were occupied, please try to clean them(right click>close the file) to test.
    Hope it's helpful.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Sorry,
    This didn't help, the files are not open, locked open, and the issue still persists. Any other suggestions?
    -Keith
    -Keith Elkin

  • .swf working when opened with Flash Player but not when opened with Mozilla

    I'm having a problem with the .swf I created.
    It works fine when I open it on my computer with Flash Player.
    When I attempt to open it with Mozilla:
    - it wont play or allow a button to navigate to Frame 3.
    -it will allow another button to fullscreen the .swf and bring it back to small screen.
    This also happens when Flash Professional creates the HTML. (Autoplay = true)
    Is there some restrictions on AS3 when used on a webpage that don't apply when Flash Player is used independently?
    I've been trawling through the forums without any luck
    Any help would be very much appreciated
    Thanks

    Hey,
    Yes there are some links but when using the right click menu to play the swf the links are there and working.
    Thanks Ned for your intrest and attempt to help! It gave me courage to dig deeper.
    After a rest and feeling less presure - I discovered the problem.
    When in webpages you can't automatically Fullscreen - its fine if on a button though. I had to take out the line below
    stage.displayState=StageDisplayState.FULL_SCREEN;
    Cheers

  • ITunes for Windows freezes when importing a library. I have a large but not huge library of mostly iTunes purchased music on two authorized computers and would like to sync the files, export the library as a playlist, and import it on the other computer.

    I am running iTunes for Windows 10.2.2 on Windows 7 Home. I have my iTunes library on both this computer and another authorized machine running Windows 7 Professional. I have a large but not enormous library, as I'm one of those people who doesn't pirate, use torrents, borrow from a dozen friends, or whatever other shades of gray you might imagine. It's mostly iTunes purchases with my old CD collection imported. I have started using the following technique to sync my libraries between my two authorized computers, an ability which you can probably all agree should one day be added to iTunes -- that would be different from Home Sharing, because the music would be stored locally and thus available on the road. With the added benefit of the entire library being backed up on the other machine in real-time. Anyway, when I switch from my desktop to laptop and vice versa, I use the following technique:
    Connect both machines to the home network. One machine is the "Active" machine, which has most recently been used for iTunes media, purchases, ratings, etc.
    On the "Active" machine, File-->Library-->Export. Save the file as "Library.xml" on the shared drive of the other machine.
    Right-click "Library.xml" where it's been saved, and open another file that has two lines in it: The root path of the iTunes library on one machine and the root path of the iTunes library on the other machine.
    Do a find/replace all in Notepad to make the library XML file point to where the files will be saved on the "Inactive" machine.
    Run Microsoft SyncToy to synchronize the files between both music libraries; the most recent files win. This avoids copying the entire multi-gigabyte library over the network.
    Open iTunes on the "Inactive" machine.
    Go to Music, Select All, Delete. Keep files.
    Do the same for Movies, Music Videos.
    Go down to Playlists, select the top one, hold down the delete button until they're all gone.
    File-->Library-->Import Playlist. Choose the "Library.xml" file you saved.
    First a status bar comes up that says, "Importing library." It has the continually-scrolling progress bar, not the one that starts on the left and steadily creeps right. Then after about 30 seconds, that clears out. Wait. Typically a few minutes. Eventually a status bar will pop up saying something like, "Evaluating gapless playback information," or something like that.
    The "Inactive" computer is now the "Active" computer. I can now play my library, it has all my playlists and metadata from the other machine.
    Delete all the duplicate playlists named "Music," "Genius," "Purchased," and "iTunes DJ."
    Well, I just upgraded to iTunes 10.2.2 a few days ago and tried to do this again like I've done it dozens of times before. Now, iTunes just goes unresponsive after the library import. It got through the "Importing library" bar to the long wait and stopped. I can still multiprocess and use other programs, but iTunes is hovering back there not responding to clicks. Task Manager doesn't seem to think iTunes is using my CPU, and I don't see my hard drive rattling. Any thoughts on why iTunes might hang up when importing a large library?
    ... Also, please help lobby Apple to come up with a network sync tool built into iTunes for a user with multiple authorized computers. Something different than Home Sharing so I can pull my laptop off the network and still have the synced library with me. And all my metadata changes will sync. The technique I use seems a little kludgey, don't you think?

    iTunes isn't an editor. You need an app that's intended for editing audio files, like Adobe Audition (http://www.adobe.com/products/audition.html) or Audacity (free in the App Store).

  • I might have messed up my files and now have the big exclamation mark on a lot (but not all of my iphotos) My document folder was full of photos and I tried to organize it by putting it into a separate folder but now I can't see my photos :-( please help?

    Hi there, I have the same problem as I've read on some of the questions posted although the answers hasn't been much help to me with regards to the big exclamation mark on iphotos when I try to open my photos.  For some reason my photo files was stored in my document folder and you can imagine how that must have looked, very unorganized.  When I tried to move the photos from there to another file that is just for my photos.  Now I can't open them in iphotos and although I tried to undo my mistake it still doesn't want to work.. is there any way I can find all the images on my computer and fix my problem by storing them somewhere else without damaging the files?
    Please help me find all my photos as I would be shattered if I were to loose any...
    Thank you.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • I google a topic, then select one. New tab reads something like "search.asp (GIF Image, 1x1 pixels), page is blank. Usually can enter web address to get webpage, not always. What does"GIF Image" message mean? How can I get the tabs to open normally?

    Have Firefox 3.6.17 on Windows 7, although right now when I look under Help it says Downloading Firefox 3.6.17 and there's an "in progress" circle.

    Thank you, jscher2000, for posting this answer to my question, and I'm sorry I've taken so long to reply.
    Yes, it was my security software. I found out that .GIF files are very commonly used for internet graphics, particularly animations and ads. I use Kaspersky Internet Security. I had the anti-banner setting enabled, which stopped the display of .GIF files. I'd rather not see all the ads, but I've found I can very easily disable the anti-banner setting to view a particular page and then enable it again to avoid the ads when I read the news. There aren't that many pages that are entirely made up on .GIF files.
    Again, thanks muchly!

Maybe you are looking for