When OS level changes ??

hi guys,
When Operating system level changes from Unix to solaris. What are the places
in Custom programs/BW has to be considered for change settings.
for eg : File path or Calling External program or external applications.
I want listings of places where i have to check for the changes to be adapted to work as same as Unix system.
Basically i want to know the places where changes will occur in BW system with respect to SAP R3 4.6C system level.
Any notes suggestion also welcome. Thanks in advance.
Suggestion please.
Thanks.
Ambi

Hi Laxmi,
Please check the below thread. I have given a possible solution in the thread.
Tcode SLDCHECK error
Cheers...,
Raghu

Similar Messages

Clear IDOC creation when only header level changes are made ME22N.

Hi All,
when the PO is on changed in the header level only(for example header texts and header code) and when we execute RSNAST00 one BADI getts triggered which checks if the Item category is 9 and badi will clear the IDOC creation.
If the PO item category is = 9, the IDOC must not be created. This badi works fine if the changes are made at
1)at Item level
2)both header level and Item level
In case of 1 and 2 we have both header segment E1EDK01 and item segments E1EDP01.As a result it checks for the item category in the item segment.so idoc is not created.
3)BADI is not working when the changes are made at the header level only. The IDOC is getting created even though the PO has the item category as 9.
I found in this case only header segments are availble while debugging and the item segments are not there to check the condition for the item category.
Please any one can suggest me possible solutions to clear idoc creation when only header level changes are made ME22N.
The BADI used is as below.
DATA : lwa_data TYPE edidd.
DATA : lw_dp01 TYPE e1edp01.
DATA : lwa_control TYPE edidc.
CHECK idoc_control-rcvprn = '3PL' AND idoc_control-idoctp = 'ORDERS05'.
LOOP AT idoc_data INTO lwa_data.
    IF lwa_data-segnam = 'E1EDP01'.
      lw_dp01 = lwa_data-sdata.
      IF lw_dp01-pstyp = '9'.
        CLEAR create_idoc.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHO
Thanks in advance.

Hi all,
Is there any way that I can get the item category details when Only header level changes are made to the PO in ME22N and only header segments are available in the IDOC.
Is this possible:- Fetch the po number and item category details from ekpo table that matches with the header segment po number and then check for item category value to clear the idoc creation?
Any information is helpfull.
Edited by: Selina.selk on Nov 20, 2009 1:39 PM
Edited by: Selina.selk on Nov 20, 2009 2:49 PM

ProRes and level change when I play

I'm not sure what I'm doing wrong, but when I capture at any of the ProRes settings, (proxy, LT, or 422) there is a level change between the footage parked and when it is playing. I thought it was the Gamma correction Auto/none setting, but that doesn't make any difference. I'm capturing from a Panasonic HD1400 via firewire. When I capture at DVCPro HD there is no shift. Thanks in advance for any help.

I'm not making any critical judgements of the footage this way, I just don't want it to change so drastically while I'm editing, particularly when DVCPRO HD doesn't do this. I guess one choice (from the school of Dr. it hurts when I do this...) would be just to continue editing in DVCPRO HD, but I wanted to be able to use the ProRes proxy for rough cuts, as OfflineRT looks really bad.

Level change when adding audio keyframes

Hi all,
I've been in Avid Land for the last few months and just came back and noticed something that was getting on my nerves when I left (I don't recall seeing this before FCP 6). When I add keyframes to my audio levels with the pen tool, I get a keyframe, but at the same time, it lowers my level as if I had added a keyframe and then dragged it down. As far as I can tell it does this every time.
Does anyone know what this is about?
Thanks,
Matt

I was having this problem, so just before I composed this reply I did some tests. It could well be 'sloppy mouse work' but I don't think so. This time the audio level went up by 1 db but before it was dropping by 1 db when adding a keyframe. During the test, no matter how accurate I was the audio level changed when adding a keyframe. The track I was working on was enlarge somewhat and the problem didn't happen on standard sized tracks. I feel that this has to be some sort of bug.
I have always found FCP a little bit on the 'accurate' side. You have to be very precise when clicking on items otherwise you will miss. Some buttons are way too small and I think Apple could improve the FCP workflow by enlarging some buttons and allowing more space around clickable items.
A good example of this is the 3 way colour corrector. The left and right buttons for blacks/mids/whites are very hard to hit and I quite often hit the maximum by mistake.
I have worked on many non-linear systems and FCP is the only one where mouse accuracy is so important.
I am, to some extent used to this now and I suppose it is a minor inconvenience in comparison to the benefits of using FCP but, in the interests of improvement and ease of use it would be good if Apple could take this onboard.
Weenie.

I was at level 111 on My Tom app, but when i've changed my i Phone it starts from 1st level. How can i get back my level?

I was at level 111 on My Tom app, but when i've changed my i Phone it starts from 1st level. How can i get back my level?

"When you changed your iPhone". Do you mean you purchased a new phone? If that is the case, did you restore the new phone from a backup of the old phone? Is it possible that the app you are using does not save data in the iPhone backup? Have you contacted the app developer to ask them about it?

Automatic reorder level change when executing it twice

Hi,
When I create forecasting view I only fill the forecast model “automatic” and selection procedure “2”, after the first run some additional settings are fill by the system (model selection, optimization level, alpha factor, delta factor) and if I run forecast again the values (reorder level) change from the first forecast value. Regading to this when executing in mass mode should i do it twice in order to get a more accurate forecast value or should I fulfill more values in forecast view and obtain the same reorder level even if a excute it twice.
Thanks
Jorge G

Dear,,
Below link will help you to find the solutions.
http://help.sap.com/saphelp_me52/helpdata/EN/f4/7d257044af11d182b40000e829fbfe/content.htm
http://help.sap.com/ERP2005_EHP_02/helpdata/EN/f4/7d256344af11d182b40000e829fbfe/content.htm
http://help.sap.com/saphelp_erp60/helpdata/EN/56/4ff5cd40e211d3b49b006094b9c9be/content.htm
Regards
Aamir

Another "An error occurred when attempting to change modules" error

Hello all:
After using Adobe Photoshop Lightroom on Mac OSX trouble free for the past 6 months, I opened up Lightroom today and received the following error: "An error occurred when attempting to change modules." I had not made any changes in between when it worked normally and when the error started to occur. I beleive the last thing I did before this error occurred was to go into the Print Module.
Other information--I keep all my RAW .NEF files on an external Firewire (800) 750 GB drive. This is on Mac OS X 10.5 running Adobe Photoshop Lightroom 1.3 and also with 1.4.1. I'm running an iMac 20" with dual-core 2.2 Ghz Intel processors and 4 GB of RAM. I have around 25k images total.
When I noticed this problem, I was on Lightroom 1.3. I immediately upgraded to 1.4.1, which did not solve the problem. I have also tried many suggestions in the forums including uninstalling the application and removing the .plist file.
I thought I had come up with a solution by creating a new catalog, then importing the former into it. While this seems to work immediately after the import process, as soon as I close it, the problem manifests itself again.
More details that may or (likely) may not help:
- Going to the Develop and Print Modules gives me no problems. However, when I click on Library, Slideshow, or Web, I see the error.
- I upgraded my Mac to the latest patch level after observing this error to no avail.
So it looks like my choices are to create a new file and reimport every single time, or lose all of the work I've done for the past 6 months on thousands of images.
Can anyone please help???? I promise to post the solution when we fix this darn thing so others may benefit. I'd be happy to run through any troubleshooting that y'all would suggest outside of switching to a Canon.
Thanks!!!!
Matt

I'd first check for the existence of a file ending in .lock, which should be present when LR is in use, but if it exists when LR is quit, it can cause problems, and should be deleted.
Please post back your results.

DMR level change at UD vs lot creation

Hi,
Can someone in simple English give me the business reason to have Q level change at lot creation level and at UD level. In what cases would one use either of them ? I have read the help and know how to configure in the system but need the business reason to chose one or the other. Please dont send me the link to help or to past posts which speak about how to create DMR rules in the system.
Thanks
GS

No matter which one you pick, you can have issues. It's picking the lessor of two evils.
The issue comes in when you have the potential of having more than one inspection lot active at a time that uses quality levels and dynamic modifications.
For "at lot creation" when you create a lot the quality level is checked and modified according to the established rules to the next "postition" or stage if you want. It ASSUMES the lot just created will pass. In this case if the lot fails, you have to manually fix the quality level after a fail. If another lot comes in before you maually fix it, it could be skipped or reduced testing.
For "at UD" the quality level is updated when UD is made. In this case when a lot is created before the UD is made on a previous lot, the quality level is still at the same level as the previous lot. As a result the new lot will be created at a level which maybe it shouldn't be. Which could be wrong if the UD fails or passes on the previous lot. In this case, the failure at UD on the first lot will reset the quality level and the next lot created should be at the right level, but the inbetween lot might not have been.
Follow that?
Craig

PO Form Issue with Header Level Changes

Issue:
It has been observed that whenever changes are done in PO Header (e.g. Header Text), system prints Billing Address and Communications Details as blank. If the changes are made to Line Item level along with header then system prints the Billing address and Communication Details correctly.
Analyse:
we are using the SELECT statement below to fetch the field for
Billing Address and Communications Details.
SELECT SINGLE
mandt z_plant z_company_code z_toll_free_no z_local_no z_fax_no
z_email z_name1 z_name2 z_street z_house_no z_district z_post_code
z_city z_country z_vat_no z_loc_term_cond z_langu
FROM zptp_poformdata
INTO w_poformdata
WHERE z_plant = ls_ekpo-werks
AND z_company_code = ls_ekpo-bukrs .
And when we only change the header level data no value is passing for comany code and plant . as a result Select statement gets failed and we are getting blank window.
NOTE: we are getting blank box only when we fire a print or fax.The preview is coming fine.

by asking so many questions in a single post,you are violating the rule of engagement given below
Only One Question Per Posting
For each question that you have, make a separate posting. Don't ask multiple questions in one posting, this is confusing for people and might not get answered, since the subject line does not reflect all your problems. If a new and unrelated question comes up during a thread, start a new thread.

IO Service Level versus Profit Analysis Simulation Set Service Level Change

R12 (RAC) Service Level versus Profit Analysis
Projected Service Level in Analysis workbench shows a strange negative quantity
when ussing Item Simulation Set in a plan.
The customer expects that when Service Level is changed in the item
simulation set, the system should use It.
But Target Service level still appears negative in the Analysis Workbench
Test Case:
Inventory Planner Responsibility.
Navigation: Inventory Plan > Name.
Look for an existing inventory Plan. Click on "Plan Options" Button.
Assign an Item simulation Set.
Save changes.
Close the "Plan Options" window.
From the "Inventory Plan Names" window push the "Launch Plan" Button.
When plan finished, navigate to: Analysis Workbench
Look for the plan, and review the showed value in the field projected Service Level.
They noticed that when they create an Item simulation Set, Original Service Level
field is not populated and they thought maybe It was part of the problem, so they
tried adding a value in the Service Level Field of the item simulation set.
However; it did not work.
They are expecting that if no change has been made to the service level in the Item simulation set, It should use the service level set in the Service Level set, used in the inventory Plan.

Hi Bruyneel,
I've solved the problem. I think while doing kernel or component upgrade SAP clear all configuration that connected from ABAP and JAVA. You can re-config from config tool.
1. Goto \usr\sap\<SID>\<SIst.Num>\j2ee\configtool and execute go.bat
2. cluster-data -> global server configuration -> services -> com.sap.security.core.ume.service.
3. Configure:
ume.login.guest_user.uniquefields with J2EE_GUEST, and make sure the user is already exist in ABAP
ume.persistence.data_source_configuration dataSourceConfiguration_abap.xml
ume.r3.connection.master.ashost
ume.r3.connection.master.client
ume.r3.connection.master.passwd : with SAPJSF user's password
ume.r3.connection.master.sysnr
ume.r3.connection.master.user : SAPJSF User
Refer for this link for help: http://help.sap.com/saphelp_nw04s/helpdata/en/20/361941edd5ef23e10000000a155106/frameset.htm
Thanks & Best Regards,
Yan

Trace level changed

Dear Experts,
I have an RFC function which contains a submit report to execute in background. Normally our system has trace level = '0' in SM50, but everytime when this job runs, the trace level changes to '2', which saved too many logs in our system.
can anybody tell me how to prevent this situation? Can I force trace level = '0'?
Thanks!
Joanne Wu

Hi Joanne,
We just came across this trace level change. Did you find a reason and/or solution as to why this happened. We are researching as I write this and just came across Note 987134 which may offer insite. However, this note talks of Kernel 4.6D, 6.0 and 7.0. We are running on 4.6D_EXT for another month and this note says nothing about this kernel. Hope you have an anwser. Thanks.
Paul G

Kernel security level changes on its OWN?

Hi...
using OS 10.3.9 on a G4 dual 533mhz with a gig of ram. It is wired into an Airport Extreme that firewalls for a wireless laptop as well, yes it is set encrypted and unauthorized NIC card addresses are excluded in the Airport Administration software...
I dont have Little Snitch set to run automatically, but it appears as having launched before the last kernel panic. (so says Crashreporter_
The kernel panic happened between the time this computer was put in user log in window Sleep Mode yesterday and when I woke it up today to log into one of the user accounts (I am the only one to have maintenance/Full Admin. access)
The typical user log in screen with the names was up, but a kernel panic had overlaid the visual... parts that made me perk up was the last line said it was waiting for debugging to occur... the NIC address of the network card was shown, and the IP number that is set in the Network panel...
I checked through Onyx into the System log Crashreporter and found the stream of log info during the 'wake up' mode:
Jan 22 22:28:16 localhost init: kernel security level changed from 0 to 1
Jan 22 22:28:16 localhost loginwindow[205]: Sent launch request message to DirectoryService mach_init port
I have never seen a kernel security change in any of the logs in the past... No new user accounts were made, and no new levels of access have been assigned to existing users...
What does this mean, a level 1 setting of a kernel? Should I Admin Panic along with the kernel?

Basically, the change means that the kernel is going from insecure to secure mode, which prevents the sappnd and schg flags from being turned off. More information is available on this page.
(19398)

Dim. SCD2 issue, when parent value change. The child loses parent history.

oracle DB: 10.2
owb: 10.2.0.4
Create a SCD2 type dimension with six levels in it. Alle levels have the same columns, see below (change the nr for the level)
L1_KPL_PK
L1_DATA_TILL
L1_SLEUTEL
L1_DESC
L1_DATA_FROM
L1
When running the mapping, the hierachie is perfectly inserted into the table. When changing the
value of the L1 parent in te source and running the mapping again the following
is happend:
He closed the parent record with the old value and insert a till date.
He update alle child record with the new value
He inserts a new record with the new value of the parent.
What i should expect wat would happen was:
He closed the parent record with the old value and insert a till date.
He close alle child records with the old value and insert a till date.
He inserts new records for all child with the new value of the parent.
He inserts a new record with the new value of the parent.
I searched on the net for this issue and i found oracle fixed it in a patch 10.2.04 The bug is know under nr 6004133
"Child looses parent reference when SCD2 attribute change in parant.
Installed the patch(7005587) and renewed my dimension, table, and mapping in the repository. Ran the mapping, but the result is not what i expexted as
descriped above.
Help needed to fix this issue. So alle histoy is beeing saved.

Hi
There was a change in OWB 10.2.0.3 (I think it was this patch) to support this scenario.
If you go to the SCD settings panel for your dimension, each level also has the parent level's identifying column (this is the new bit) and you can set the Record History property for the parent identifier in order that a change in this will trigger history in the level (so the hierarchy can be versioned). So if you set this and synchronize the dimension operator in your map and redeploy the map, you should be in shape.
So for example if you had L1, L2, L3 with attributes ID, NAME, ATT, EFF_DATE and EXP_DATE then the SCD panel would have;
*L1
ID
NAME
EFF_DATE eff date
EXP_DATE exp date
ATT trigger history
*L2
ID
NAME
EFF_DATE eff date
EXP_DATE exp date
ATT trigger history
L1_ID trigger history
*L3
ID
NAME
EFF_DATE eff date
EXP_DATE exp date
ATT trigger history
L2_ID trigger history
Let me know if its unclear.
Cheers
David

Place to put a code for dunning level change in F150

Hi,
I have a requirement to block the credit management of a customer ( KNKK-CRBLB) when dunning level of a customer reaches 3 (KNB5-MAHNS or MHND-MAHNS).
I put my code in FM 'CHANGE_DUNNING_DATA'. But this FM is executed only for the few cases. Reasons are unknown to me. It may be because this FM is called in another FM 'PRINT_DUNNING_NOTICE'.
I believe that dunning is completed when the dunning notice is successfully mailed, faxed or printed. Then only the customer master is updated.
The program for F150 is SAPF150V. But neither KNB5 or MHND is updated in this program.
I tried BTE's also. But none of the BTE's is called when a dunning notice is printed.
I am not able find the place where i can put my code.
Kindly help..!!!!

Hi
With the field that I told you in OVA8 you can achieve to lock some SO or delivery because the customer has some level in dunning (it's updated from F150 but you can change it in customer master). To know BTE's in dunning see SAP Note 156985 - Reference Note: BTE for dunning, but I have doubts that it will help you
Regards
Eduardo

Audio export- levels change on several clips

This is driving me crazy!
Using FCP 5.1.4...
Upon exporting the entire show for DVD--audio as an AIFF, the levels of several clips change and become really loud.
A work around I used when I made the last version of the dvd was copying each clip and pasting the content back into the clip via Paste Attributes. It would trash the renders (I am using audio effects such as reverb) and upon export would be fine. Now, this trick isn't working.
Any ideas? In Final Cut, everything sounds great, so there's no way to tell before export that there is a problem.
Thanks.

Okay, I trashed all of my renders.
This is weird-- Now in FCP I am seeing the level changes in clip overlay mode. It's like trashing the renders is allowing the "true" levels to show. WEird. One clip has all these kefprames on it while it's stero pair partner is completely flat.
Weirdness.
I noticed some other render file issues with this project previously--old video render files wouldn't go away ever after toggling the Clip Enable on and off which is usually good for disconnecting a render from a clip.
Anyone seen this behavior before?
I gotta get FCP 6.0 I think!

When OS level changes ??

Similar Messages

Maybe you are looking for