When OSFM  OSP Job Is Split,OSP PO Release Is Not Split

Hello,
When the job in the OSFM is Split at the OSP operation, the corresponding PO Release is not split. This creates issue when we are receiving the PO.
As per the metalink document Note:554459.1. This situation has to be manually handled by updating the quantity.
Are there any new feature in R12 which manages to split the PO when the OSP is split?
Thanks
Geetha

Geetha, as mentioned in metalink note you need to manually update the PO Release after WIP Lot transaction. There are no enhancement in Release 12 for OSP.
Thanks

Similar Messages

  • When importing a cd it splits the album into separate individual tracks instead of 1 album with numerouse tracks - how do I get them all together

    When I import a CD from the Apple Mac drive it splits the cd into numerous single tracks in itunes instead of 1 album with all the tracks. How can I get it to import to the one place. I did try importing the same cd on a friends apple mac to see if it did the same thing and it imported the cd as 1 album with all tracks in there so I can't understand why it's separating them all.

    This happens mostly when you import a compilation or a CD that is not noted in the Gracenote Database.
    How to change back in one Album:
    Mark all titles of that album (shift or cmd click)
    Right click and choose "Get info"
    Fill in the wanted name in "Album" and "Album Artist*"
    Drag&Drop the wanted Album Art to the little window down right in that pane.
    iTunes group and sort albums by that two entry's in the info pane. If the CD is not listed in the database but the titels, iTunes split the album to fit the titles to eventually matching albums of the artists.
    Cheers - Lupunus
    * If you import a compilation, choose "various artits" for the Album Artist field.
    Message was edited by: lupunus

  • What command will be executed when I schedule job via DB13

    Hi all,
    How do I get what command(full syntax) will be executed when I schedule jobs via DB13?
    For example:
    - Action: REORG of Tables in Tablespace(s)
    - Tablespaces: "WI6#BTABD" is selected
    - "Use Temporary Tablespaces" is selected
    I think this is a really basic question...
    Could you give me some advice?
    Thanks in advance,
    Ikue

    Hi Ikue,
    yes,  you won't see, what the 'REORG for all tablespaces is doing. But it's not really necessary. Its's simply always the same call
    REORG TABLE <tabname> INDEX <primary key> ALLOW NO ACCESS
    and optionally the addition  USE <tempspace>, if you have selected this option in DB13.  And it is called for each table that is located in the tablespace(s) which you have specified.
    The 'REORG for set of tables' is quite new. It is available with Basis Support Package 7.0 SP12. Before there was only a job to Reorg a single table.
    The REORG for flagged tables is a deprecated job.
    If you want to know more about the various REORG jobs and when and how to use them, then you should look at note 431430
    Best regards
    Ralf

  • Triggering  a job when the first job gets cancelled...

    From BMV0, we can trigger a job once the first job is completed using the 'After Job' option. Can u tell me if its also possible to start another job when the first job gets cancelled ?
    Message was edited by: Sushma Anuprava
    Message was edited by: Sushma Anuprava

    Hi,
    Go to the database view V_OP and check for the column 'STATUS' which gives the background job status , based on value from this column (cancelled status ) , start the new job with FM : 'JOB_START' .
    Regards
    Appana

  • URGENT : Error 5 when checking the job status

    Hello Forum,
    While monitoring the Process Chains in BW 3.1, I got the following message in the <b>Information </b>Pop-up:
    <b>Error 5 when checking the job status</b>
    Could you please tell me what it means?
    Thank you,
    its my duty to assign points,
    raj

    Hi,
    Are you able to view the log after refreshing and clicking the tick mark button on this message or is it not letting you go into the log itself.
    Can you directly go to Log view thru Tcode RSPCM and see. Once you are inside try to find where exactly the process failed.
    Thanks,
    JituK

  • When I plug my Ipad2 to my Imac, it does not sync all my photos from my Itunes library. It also splits events and picks what it wants to sync. How do I get all my photos to sync with Ipad2?

    When I sync my Ipad2 with my Imac, it does not sync all the photos. It seems to pick & choose what it wants to sync and also splits events. How can I set it to sync all photos so both libraries are the same?

    Can't help you with the sync problem but the splitting of events was supposedly fixed with the iPhoto 9.1.3 updater.
    This is from the download page:
    This update fixes a problem that could cause some events merged in iPhoto to be split back into multiple events on iOS devices after being synced.
    So update iPhoto to 9.1.3 and re-sync.  If you already have updated to that version then I'm at a loss.

  • Can Windows Server Backup spread a single backup job across multiple disks if they are not set up as a virtual disk?

    This may be a dumb question, but I can't seem to find any definitive information after having done many, many searches.  Short question is - can Windows Server Backup spread a single backup job across multiple disks if they are not in a storage
    pool or some other RAID/JBOD structure?
    Background:
    I'm running Server 2012 Essentials with all Windows Updates installed.  I have been backing up approx 2.8TB of data (Bare Metal Recovery, C:, S: (shared folders), and system reserved) for the past year+ onto a storage pool made up of two-2TB external
    USB drives.  Backup is slow (takes approx 1.5 days to complete), but generally works.  Not surprisingly I was constantly getting capacity low messages so I decided to increase my backup storage pool by adding a 3TB drive and another spare 750GB drive
    for a total of 7.75TB.  Instead of having four separate external USB enclosures, I bot a 4-bay enclosure - Startech.com model #S3540BU33E to simplify this (or so I thought!).
    The first problem I had was adding the two new drives to the existing storage pool. I think that is because the Startech uses a JMicron USB controller that reports identical uniqueid's for all drives so only one shows up in the GUI interface for creating storage
    pools. After doing research on this, I set up a new storage pool and virtual disk using all four drives via Powershell and thought I was good. However, when the backup ran, it failed after filling the first drive, saying there was no remaining capacity. In
    reality there were three remaining empty drives and there storage pool reported almost 5TB of avail capacity. I assumed this was due to the identical uniqueid issue so I decided to try a different tactic.
    Instead of using a storage pool that combines all four disks into one virtual disk, I just added each of them to Windows Server Backup as individual drives thinking it would manage them collectively. I.e., when a drive filled up during a particular backup,
    it would just start using the next drive and so on. Apparently this was a foolish assumption because the backup failed again as soon as the first disk filled up.
    So now I don't know if this is still an issue with the identical uniqueid's or if Server Backup actually can't spread a single backup across multiple individual drives that aren't in a pool or other virtual disk implementation. Hence, my original question.
    My guess is that it does *not* spread them across individual disks, but I just wanted to get confirmation.
    Thanks

    Mandy,
    Thank you for following up on my question.
    Unfortunately the article you referenced doesn't address what I am trying to accomplish.
    The article focuses on saving the same backup job to multiple disks and rotating the disks between on and offsite for enhanced protection.  However, it still requires that an individual backup job fits on a single disk.
    What I am trying to determine is if a single backup job can span across more than one physical disk (during the backup process) without those physical disks being in some type of virtual disk implementation (e.g., storage pool, RAID, etc.).
    Thanks,
    Gerry

  • A Crystal Reports job failed because a free license could not be obtained i

    We have an enterprise application installed at a clients site where they have 10 CITRIX clients connecting to 5 APPLICATION servers (the servers are being load balanced). The application allows users to generate reports. The reports are generated on the APPLICATION servers. We have written some queued components which allow up to 5 reports to be generated at the same time. We have crystal reports XI installed on the APPLICATION servers. Currently we get the following error when users attempt to generate reports:
    A Crystal Reports job failed because a free license could not be obtained in the time allocated
    However if you change the queued components to only generate 1 report at any given time we do not get the error.
    Any ideas on what could be causing this?
    Thanks in advance.
    Raman.

    duplicate - please do not post multiple times

  • Definition of job SAPRUPGM is incomplete. Operation is not possible

    Hello all,
    We are administrating an SCM 5 system (APO to the old skool) and the previous administrator has left a job called SAPRUPGM that is scheduled but not released. When I try to release or change this job I get the messages
    -"Definition of job SAPRUPGM is incomplete. Operation is not possible"-
    Anyone know (a) how to get around this message and/or (b) what this job is for?
    Cheers
    Jamie

    Hi Jamie,
    As far as i know SAPRUPGM is runned after upgrading your system.
    If the job has been scheduled and not released and everything seems to be running ok... I'll just delete it.
    SM37 -> Job -> delete
    Regards
    Juan

  • Jobs stays in waiting state but does not ever run in target system

    This usually happens when there is a network problem or the target system is down for some reason. Is there a way to ignore the waiting status so that the next scheduled job runs would be affected? If not can CPS be configured to constantly request for the actual status of the job in the target system?

    Hi,
    Set the below parameter on the process server of the target system for which  jobs stays in waiting state.
    Parameter: SAP_MaxReconnectTime  value: 60
    Reason: Process servers tries to connect to Target system at the time when the network issue happens and due to that It does not connect to the target SAP system and all the jobs stays in waiting status.
    When you set this parameter with the value (what ever you want in Minutes), it will automatically try to reconnect to the target SAP System at every 60 min (or the value provided) when ever it loses the connection with Target system and Jobs will start processing again.
    Thanks and Regards,
    Vipul Kaswala

  • I purchased 2 books for my iPad and they downloaded successfully.  They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac.  Is this a synch issue?  When I click the Synch box I am warned that downloads on my iPad will be

    i purchased 2 books for my iPad and they downloaded successfully.  They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac.  Is this a synch issue?  When I click the Synch box I am warned that downloads on my iPad will be erased.  Is that true?  My ultimate goad is to be able to read the books on my iPhone as well.  Thanks.

    You should be able to copy them to your computer's iTunes via File > Transfer Purchases and you can then sync them to the iPhone (or you could re-download them directly on the iPhone)

  • I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

    I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

    What happens when you try to sync?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
    Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

  • HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

    I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

    See this previous discussion:
    https://discussions.apple.com/message/16962474#16962474

  • HT2443 loops are in the browser when you the loop message reads this file type is not supported

    loops are in the browser when you the loop message reads this file type is not supported

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • HT4623 When i click on general settings, the software update does not seem to come up? It wont let me download any apps.

    When i click on general settings, the software update does not seem to come up? It wont let me download any apps.
    I Want to download i0s 5
    i have ipod touch 3rd gen

    You need to connect your iPod to iTunes on a computer and update from there.
    Before updating, I recommend that you create a backup first, using : http://support.apple.com/kb/ht1766
    Please note that iPod 3d generation only goes up to iOS 5.1.1
    To update the iPod, use: http://support.apple.com/kb/ht4623
    scroll down to the part that's about updating with iTunes.
    Good luck
    Stijn
    Message was edited by: jesterwylde

Maybe you are looking for

  • What's wrong with this code (AS3)?

    I want to publish a live stream and, when a button is pressed, publish the same stream for vod.  I haven't been able to get an answer as to whether I can do this...my code is below.  Can someone please tell me if I can do this, or what may be wrong w

  • JNI : cannot create JVM

    Hello everybody, sorry to bother all of you. I got problem with the JNI. I'm creating a Windows service that invoking a Java-based server via JNI. I'm copying the source from the JNI tutorial (from sun), and the problem is: res = JNI_CreateJavaVM(&jv

  • Drive where BOE is almost maxed out - need to move stuff.  What and How?

    Hey Everybody, I'm running BOE 3.1 SP3.  I did an out of the box installation directly onto my server.  I've been running fine for almost a year now.  I have 10+ report writers and thousands of reports/instances on the server now. What I didn't antic

  • Issue in group by clause.

    Hi,   I am using a select query to retrieve sum of few numeric fields as below. select field1 field2          sum ( field3 ) as field3          sum ( field4 ) as field4 into table t_tab1 from dbtab where field1 in s_field1 and   field2 in s_field2 an

  • FileSaveService ignored the file name and file extensions

    I am using the JNLP API to build a JWS application. When using the FileSaveService, I found it automaticlly ignored the file name and file extensions I passed to the 'FileSaveService.saveFileDialog()'. My code is like the following: String[] xtns = {