When PC System timing hits 0000hrs Loops back to start and runs again using Loop function?

It's all described in the help for it. Vista version:
Attachments:
Task Scheduler.png ‏61 KB

Similar Messages

Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

I can't back up my iPhone4. When was I syncing, My computer hang. I restart computer. Itune told me there is an error, delete the back up file and try again. But there are no back up file to delete in preference-device. Please help!

I can't back up my iPhone4. When was I syncing, My computer hang. I restart computer. Itune told me there is an error, delete the back up file and try again. But there are no back up file to delete in preference-device. Please help!

Thank you for answering my question. If I reinstall itune, is it mean that I need to install music, apps, video...everything in itune again? also intall everything in my iphone again?

When installing iPhoto update, I got this pop-up -The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update. What does it

When installing iPhoto 9.2.1 software update, I got this pop up.
"The system extension “/System/Library/Extensions/IOFireWireWDHID.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update."
Is this a minor matter that can be ignored? Any suggestions on what I should do?

The faster (and way more recommended) way to do this is to run a permissions repair from disk utility.
Open Applications -> Utilities -> Disk Utility -> Click on Macintosh HD -> then in the right pane there is a "Repair Disk Permissions" button click on this. It should repair all permissions to their proper settings.
Another option is to manually repair them on this kext only. This involves opening Terminal and running the following commands.
sudo chown -R 0:0 /System/Library/Extensions/IOFireWireWDHID.kext
sudo chmod -R 755 /System/Library/Extensions/IOFireWireWDHID.kext
Otherwise if you don't have any firewire devices it doesn't really matter.

When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

Hi SheilaStuhr,
The troubleshooting steps detailed below can help get you connected to your iPhone's personal hostpot.
Basic troubleshooting
See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
Install the latest version of iOS.
Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
If you still see the issue, restore the iPhone.
If you're still experiencing issues, try the steps below.
Wi-Fi troubleshooting
If you encounter an issue using Personal Hotspot with other Wi-Fi devices, try these steps:
Turn Personal Hotspot off.
Turn on Wi-Fi: Tap Settings > Wi-Fi.
Turn on Personal Hotspot.
If another device can't join your Wi-Fi network, make sure the Wi-Fi password is correct.
If the device can't see your Wi-Fi network, check your device name. Windows may not correctly show a device name that uses non-ASCII characters.
See how many devices are using your Personal Hotspot. Depending on your wireless carrier, the number of Wi-Fi connections may be limited to three devices at once.
If the other device still can't connect, turn Wi-Fi off and on for the device.
Make sure that your device can see other Wi-Fi networks.
Note: If you see "Unable to Join" or a timeout error when you try to connect a device using Wi-Fi, remain on the Personal Hotspot screen until the first device connects. After the device connects, you can leave the Personal Hotspot screen and use your iPhone normally. Your device will stop broadcasting Wi-Fi if you put it to sleep or if 90 seconds elapse and no connected devices use Wi-Fi. To share your Wi-Fi network again, tap Settings > Personal Hotspot.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/en-us/HT203302
All my best,
Allen

What does this mean? ... System extension cannot be used ... The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

I get this message often when updating things. I have told Small Dog Computer where I buy my stuff, and they didn't have an answer. Thanks in advance.
What does this mean? ... System extension cannot be used ... The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

Interesting ... thank you! Actually I had that external drive, Western Digital, a while back on my second last? or third last? laptop ... the external drive died with a slew of pictures I had carefully uploaded to it :-(
I won't worry about it anymore :-)
sorry you got only 5 points, can't figure how to give you 10 points.

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

How to make a button to stop and run a for loop?

How to make a button to stop and run a for loop? and if it is stopped it shall start from where i t stopped.

Your VI has some very fundamental flaws.
The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
Thus the terminal of the start/stop button belongs inside the FOR loop.
Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
Once you solve (2), the x indicator will contain a random value whenever you "stop".
As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
Place e.g. a 500ms wait inside the FOR loop to solve this.
Don't place terminals of indicators on top of formula nodes.
Your formula does not produce any output, so really has no purpose.
Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
LabVIEW Champion . Do more with less code and in less time .

How to change the application status back to build and run

hi ,
i changed my applications status to run only .. and now system is not allowing me to change the status of my application back to "build and run"
any help is appriciated..
Thanks

I found the solution for my problem as go on below track and change the setting.
Home-->Application Builder-->Cross Application Reports-->Build Status and Application Status

Message displayed: System extension cannot be used The system extension "//System/Library/Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

Received following message during installation of an iTunes update today (9/16/14): System extension cannot be used. The system extension “//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update. What is to be done about it?

Thanks for the reply. I'm not experienced in the inner workings of the iMac system and its programs, so please follow my train of thought as I try to find and understand your reply.
You wrote that I should check out "Please see - AppleUSBEthernetHost.kext error on installing iTunes update" and I did so.
There I found your reply of 9/1014 7:06 PM to j'ski stating: "There is a larger thread here which you may want to follow - system extension cannot be used AppleUSBEthernetHost.kext ."
And an earlier Post by Greg Earle of 9/10/14 5:57 PM stating: " You would have been better off doing open /System/Library/Extensions and then finding the AppleUSBEthernetHost.kext kernel extension icon in the Finder window that came up and moving it to the Trash."
And a subsequent Post on 9/15/14 at 2:59 PM by Rob Maurer stating: "This method worked perfectly for me. I am on a Mac Pro running Mountain Lion. Dragged the kext file to trash (I use EasyFind. Found the file, Revealed in Finder, dragged to Trash, entered admin password when requested). Downloaded iTunes 11.4 from the website. Installed from that download. Checked for that kext file in EasyFind again and found it had a creation date of 7/29/14 (the trashed one had a creation date from 2009). No more error messages. ITunes opens fine. Everything good. Will not update on my MacBook Pro until they fix this issue.
All of which leave me wondering - what is your answer/recommendation? Do I drag the kext file to trash, download iTunes 11.4 from the website and install it from that download, check for that kext file again to see if it has a later date than the initial one? And, if so, seed if iTunes opens okay or not? And if so, do not update iTunes again until Apple fixes whatever is wrong?

When i am suppose to upgrade my apps it starts and then halfway though it stops and tells me to keep retrying all the time never finishes the upgrade

when i am suppose to upgrade my apps it starts and then halfway though it stops and tells me to keep retrying but it never finished the upgrade

reboot your phone then restart the app updates again. This usually fixes the problem. Also if you have a lot of updates it will try to do too many at once. tap the ones that are downloading and pause all but two at a time. As soon as thoughs go into the installing unpause the next two. If you have too many going at once then during the install it takes too long before it starts the next download on itunes will require a password again so it stops all the update in the middle. The other work around is to update one at a time in the app store instead of hitting the update all button.

System extension cannot be used The system extension "/System/Library/Extensions/IOStorageFamily.kext" was installed improperly and cannot be used.

What's up with this? The drive in question is an 80gb IDE external drive, USB connected.
System extension cannot be used
The system extension “/System/Library/Extensions/IOStorageFamily.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

The system extension "/System/Library/Extensions/IOSCSIArchitectureModelFamily.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

The system extension “/System/Library/Extensions/IOSCSIArchitectureModelFamily.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
i keep getting this when i connect my ipod nano 6th gen to my Mac Mini. I am running the latest OS and the Latest Itunes. Not sure what the problem is.

For everyone with this problem:
Repair Disk Permissions.
My USB drive is recognised again, few!

The system extension\"/System/Library/Extensions/PACESupport.Kext\" was installed improperly and cannot be used.

The system extension\"/System/Library/Extensions/PACESupport.Kext\" was installed improperly and cannot be used.

PACE is a copy protection scheme for a piece of software you have installed, it's a kernel extension that loads when the computer first boots.
There was problems with PACE with the 10.6.8 update, it looks like Apple has recognized it and removed it when a update to 10.6.8 occurs.
Consult with your third party programs that use this kernel extension and mention your OS X version and request a update.

In running the Software Updater, I encountered an error: "System Extension cannot be used" ... System/Library/Extensions/AppleUSBEthernetHost.kext was installed improperly and cannot be used.

While running the Software Updater, I encountered an error: "System Extension cannot be used" ... System/Library/Extensions/AppleUSBEthernetHost.kext was installed improperly and cannot be used. Can somebody help me resolve this error message. Would this error affect my ability to run FaceTime ?

Seems pretty clear to me. Here's what you can try:
Open Terminal in your Utilities folder. Paste the following at the prompt:
sudo chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext
Press RETURN. Enter admin password when prompted. It will not be echoed so type carefully. Press RETURN again.
Restart the computer.

When PC System timing hits 0000hrs Loops back to start and runs again using Loop function?

Similar Messages

Maybe you are looking for