When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??
When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??
You may need to do a Restore in iTunes.
Clicking sounds from an iPod that has a hard drive is probably not a good thing. It is possible that your iPod's hard drive is becoming unreliable.
Similar Messages
-
my ipad mini is keep on crashing. reboot many times. after the apple logo shows up, the screen will turn into black again.
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
I was updateing the software on my ipod through the wireless straight to the ipod and had to stop so held down both the power and the home buttons. Now the screen is frozen with the apple logo and the normal 'unfreeze' technique won't work. The computer does not recognise the ipod so will not charge or restore it. Is there anything that I can do myself?
Unplug it and let unit go dead. Then hold your Home button down and plug the USB power cord back in. iTunes should see it and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
what do i do when i go to charge my ipod and the apple logo shows up instead of the low-battery icon?
Try resetting.
Press and hold the On/Off Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. -
My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progress in the bar did not start yet after 5 hours. Some one please hep me.
I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.
-
When turning on my Macbook, the Apple logo shows up, but then the circle just keeps spinning and I cannot move forward...PLEASE HELP! Can I take it to the Apple Store to get fixed? Can I do something? It's driving me nuts!
Do you hear any clicking?
Boot from the install disk and repair the disk and permissions. -
Apple replaced my hard drive (macbook pro 2011). Now I am unable to buy/download ilife from the apple store "on this computer". Any ideas as to why?
Thanks for your help in advance!If the computer shipped with Snow Leopard then you would have received an install DVD for iLife with the computer.
-
I was trying to update my iphone software recently all was going well until I had to connect to itunes. After connecting with itunes, the "restore" proceedure did not work as supposed to and the phone is now permanently off with the apple logo showing continously. The phone also doesn't seem to hold charge and its been plugged into a power source for over 6 hours. Phone also gets quite warm. What can I do?
hold the home button and the power button at the same time
-
iphone fails to turn on. The apple logo shows up but nothing happens after that
Hi Haleynichole_99!
I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using the Apple Support Communities!
Cheers,
Braden -
How to fix OS X Yosemite installation Problem?
When the unit is rebooting the apple logo shows up then it is replaced by a cancel symbol?
Please help what to do?Do you mean a circle with a slash through it?
If so, the drive doesn’t have or can’t find the necessary startup files.
Boot into Recovery and reinstall. -
when i turn my macbook pro on , the apple logo shows up, but it is just loading. I have tried to turn if off , but the same problem appears. Someone know what the problem is?
Boot into Safe Mode
A Safe Mode boot can take a few minutes compared to a normal boot.
Once you are in Safe Mode open System Preferences > Accounts > Login Items
If you have anything listed there to launch when you startup your Mac, delete all items.
Then go to the Apple menu / Restart.
You can also use Safe Mode to do a "live verification" of the startup disk in case it needs repairing.
Help here > Using Disk Utility to verify or repair disks -
I tried to restart my ipad. Instead of the apple logo coming up, the wheel has circled for hours. I don't know what to do about this. Can anyone help? Thankis.
Hard Reset.
- Hold down the Home Button (Circle button with White Square in it)
- Wait for the 'Slide to Unlock' screen pops up
- Test to see if the issue is resolved. -
hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzzHi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W. -
Since downloading 8.1.3 onto my iPad, video streaming through my Apple TV freezes after a few minutes whilst audio continues as usual. Anyone experienced this and if so, is there a fix?
8.2 is out...perhaps that will address your problem.
Barry -
The power comes on. Screen turns white. The start up sound plays, the apple symbol come up the loading bar show up but do not show any sign of loading. The loading circle appears and spins. Then the loading bar disappears and the. The screen goes black and power goes off. I've tried unplugging, command alt escape, and command alt p r, no effect. Any other suggestions???
OS X v10.6- Gray progress bar appears under Apple logo during startup
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Maybe you are looking for
-
IPhone + more than one computer.
Why is it that my friends can come over with their iPod nanos and drag and drop all of my music into their iPods perfectly fine, but when I go to their house I can't do the same with me iPhone? I payed more for my iPhone than they did for their iPods
-
Hi BADI experts, I have a requirement where I have to debug the code in the change method of BADI - ACC_DOCUMENT..... I have a Implementation for the same as Z_ACC_DOCUMENT_IDOC and I have the code in the change method.. This
-
Authorization Object to Control access for ContactData in Dispute Managmt
Hello Experts, Do you know which Authorization Object is necessary to use to be able to control Contact Data available in Dispute Management? Any hint will be much appreciated. I want to have greyed out the contact data fields (contact person, e-mail
-
Type 3/4 driver required for SQL Server (Weblogic 6.1)
Hi All, I would like to know the site where I can download the driver for SQL Server on Weblogic 6.1 Application server or if someone can send me the driver via email to my email id [email protected] Thanks in advance, Seetesh Hindlekar
-
MRP scheduling at the back ground??
hii Can somebody explain me how to set MRP to be scheduled at the back ground. Step by steps activities for this and if any ABAPer help we have to get , mention that also. Thanks