When PO is cancelled PR is not getting updated.

Hi all,
I have written a condition for pending pr.
COMPUTE pending pr qty = EBAN-MENGE - EBAN-BSMNG .
But in case if the po is cancelled the quantitiy is not getting reverted.
When PO is cancelled PR is not getting updated.
Is there any other condition to check or any solution please.
Regards,
Priya

Hello Sivapriyaramesh,
Link: [http://www.finance.utoronto.ca/fast/qrg/purch/po/finalizecancel.htm]
Please check the link. hope this solves your problem.
Cheers,
Suvendu

Similar Messages

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

I have never seen it but then I run SL which is much more reliable than Lion..
See
http://pondini.org/TM/E4.html
Check the master guru of all TM problems.

Delta Records is not getting updated in delta queus when changes done

Hi All,
In Quality system , when a user makes a change to an order's ship-to address, the changes are "triggering" a delta record into the delta tables for BI to extract. This can be seen via tcode rsa3's delta tester.
In Productionn System, when the user makes the exact same change, nothing is added to the delta table and the changes never come over to BI unless a full extract is request for the order.
Why changes not getting updated, please give your inputs.
Thanks & Regards,
Venkat Vanarasi.

Do you have your V3 update job active and running? THis job wites changes to the delta queue. Of course your datasource has to been initialized and a delta queue should be setup. You can check it in RSA7.
Regards,
Juergen

Future price is not getting updated as current price when period changed

Hi all,
We follow the following procedure to update standard price in material master. Our organization is a manufacturer of pharma products. ( System is not live yet)
We have BoM's for all FG's and all FG's & SFG's are having Price control indicator as "S". Rest other materials are valuated for Moving Average price.
> Run T-code CK11n for the FG.
> Check whether costs of utilities and final product is as per the cost sheets prepared manually (10-20% difference acceptable)
> Do not save it and goto CK40n tcode. Mark and release price of FG's & SFG's for the current date (eg: 16.01.2008). Now as 10th period of year 2008 was not open at that time and only 9 th period of year 2007 was open, the prices were updated as "FUTURE PRICE" in costing-2 view of material master.
> Now that when i am opening 10th period (both financial period and inventory period), my future price is not getting updated as my CURRENT PRICE in material master as my standard price.
Pls. reply to this urgently.

Hi,
I am sure about it that when CK40n was done for a future date when some n-1 period was open, the costs released would get updated as future price.
When the period for which future price was updated is opened as current period, the future price automatically gets updated as current price and is also set as standard price in accounting 1 view.
But i m unable to identify why is not working.

Billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc.

Hi All,
In case of billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc. no. Each time user has to clear the doc. manually. We have observed this issue after recent patch updation dated 22nd Feb’2014. Till 21st Feb’2014 the cancelled doc. has been cleared automatically against their respective billing documents.
Please guide.
Thank you.

Hi Gopi,
Please chheck SAP Note No. 1259505. It explains two ways in which SAP releases cancellation documents to FI.
OSS NOte 1259505 lists the possible causes from SD side &
OSS Note 309208 lists the possible causes from FI side.
Regards,
Kavita

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless i select the list in the sub file. How do I get backto the old method of seeing and using iTunes??

I Just received the update to iTunes, when I I look at the screen I do not see the normal icons. When I select movies I do not get the new downloads unless I select the list in the sub file. How do I get back to the old method of seeing and using iTunes??

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??
iPhone 5s
Software - IOS 8.1
iTunes - v12
I have been using sync on all previous phones to date without issue, I have had the 5s since Nov 2014 and no issue, on Sunday without warning or changes to my phone or Outlook sync now has this error.
I have restored my phone but still has same problem.

Your IT person is an idiot.
http://lmgtfy.com/?q=how+to+sync+iphone+with+outlook

I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.

I downloaded Magzter app button iPad 2 but when I buy magazines it is not getting downloaded but the same is getting downloaded in my iPod. Pl help. Magzter support is unable to help.

You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.

Item description not getting updated when material description is changed

Hi,
In a contract, line item description gets copied from material master. However, when material master is updated line item description does not get updated in a transaction. Is there a way to update this?
Thanks,
Deepak

Hi Deepak,
Line item description is not changed as when you enter the material in order and save, description is saved in table CRMD_ORDERADM_I along with other details. now if you change the material master description it is pretty obvious that CRMD_ORDERADM_I contents will not automatiically change. if you enter the same material again in order as new line item system will read from material master whereas for existing line items will be read from CRMD_ORDERADM_I . you can change the description using FM CRM_ORDERADM_I_MAINTAIN_OW
i hope it clarify your concern.
Thanks
sudhir grover

HT4623 I try to update ios to 6.1 but it doesn't work and now iphone gone to factory mode from initial stage and upon when am connecting to itune its not getting thru, kindly advice

I try to update ios to 6.1 but it doesn't work and now iphone gone to factory mode from initial stage and upon when am connecting to itune its not getting thru, kindly advice

From the Firefox help files;<BR><BR>
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.

Mat doc not getting updated in AFRU table

Hi All,
While doing the confirmation cancellation for the rework order the referance material document is not getting updated in the AFRU table.
The referance operation set is used for the rework production order and there are no component assigned ,the components to be issued are entered at the time of confirmation.
The material document is getting updated in case of confirmation in AFRU table but the same is not getting updated in WABLNR field in case of cancellation of confirmation.
When I checked MSEG all the material documents are observed with referance to the order number but the same are not displayed in AUFM and AFRU table.
This behaviour is not obeserved in case of normal production orders. what can be the reason behind the same?
Regards
Ankush

Dear Ankush
please see FAQ note 540392 question 11.
11. Question:
Despite successful goods movements, the material document is not
updated in field AFRU-WABLNR. Where do I find the document number?
Answer:
As of Release 3.1H, the system provides the reference from
confirmation to material document via table AFWI. The system still
only uses AFRU-WABLNR in the case of header confirmations or
confirmations for an individual operation. With milestone
confirmations or with separate goods movements, in other words goods
movements that are posted in the update program or via requests
(BAPIs, collective entry, mass processing, BDC/PDC), table AFWI is
always supplied due to technical reasons.
BR Sabine

On reversal of Invoice the table BKPF not getting updated properly

Hi
I have an issue, that when we create the Commercial Invoice, accounting document generated automatically. And after that due to some reason when we reverse the same through VF11, the accounting document which was created while doing the invoicing not getting updated by "reversed with (STBLG)" field and "reversal Indicator (XREVERSAL) field in the table BKPF.
However when I test the some scenario in Development and Quality server the same field is getting updated.
I have already checked the Billing Document Type of SD and accounting document type but found everything in place.
I am unable to get what is missing,and why this is happening in Production server only.
Need your input at the earliest.
Thanks in advance
Regrads
AA

Hi
thanks to all for their suggestion, the issue resolved with the help of SAP.
For the forum members information :-
This is standard system behaviour.
BKPF-XREVERSAL is only populated/filled in the reversed original
and in the reversal FI document if BKPF-STBLG and BKPF-STJAH
are populated/filled in reversed original and reversal FI document.
BKPF-STBLG and BKPF-STJAH are only populated/filled in reversed
original and reversal FI document if the new/real cancellation
procedure (-> with automatic clearing of the open items) is executed,
and the new/real cancellation procedure is not executed, if an
open item of the original, to be reversed FI document, has already
been cleared (-> also see note 309208).
Regards
Amitesh Anand
Edited by: AA on Apr 25, 2009 11:37 AM

Tax is not getting updated in Sales Order Pricing Conditions

Hi ,
Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
Following are the changes for in the standard Pricing:
1) Created ZPSC condition type to calculate the sur-charge from Z-table
2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
We implemented the logic for updating values of Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
Please suggest how to update the Tax values correctly without manual update.
Thanks ,
Rajesh Sanapala.

Hi Lakshmi,
I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
Thanks
Ivy

Data is not getting updated in table using RFC

Hi Experts,
In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
Regards,
Sari

HI Sari,
as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
-- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
-- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
Thanks,
Bhupesh

The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

When PO is cancelled PR is not getting updated.

Similar Messages

Maybe you are looking for