When press Firefox, User account control asks if Firefox can make changes to computer. I have windows 7.It has only just started happening.
Happens when I want to go to internet. I have Mozilla 5.0. It has only just started happening.
Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.
You also need to check the Properties of the firefox.exe program in the Firefox program directory.
Similar Messages
-
When I compose an email it flies up the screen when I press the shift key and then comes back again. I've clicked default settings on Keyboard in Preferences but it has made no difference. It has only just started happening. Any ideas?
This problem has also been plaguing me today. Here are my specifics and how I solved it (Expanding on what Quentin Holmes mentioned)
CONFIRMED WORK AROUND! The .m4v file gets created while encoding, but Adobe Media Encoder does not re-pack it back into the .mp4 unless you select the "Export Audio" in Adobe Premier export prior to queuing. If you don't want audio, mute the individual tracks and still export audio.
My details:
Just bought a GH4, shooting 4k 25fps MOV, trying to simply trim a few clips and export them as H.264 .mp4 with no audio. (By the way it would be nice if we could export 4k .MOV files from the camera back into .MOV once finished editing, but in premier that frame resolution is not supported)
Specs: Mac Mini, Quad Core i7, 16GB Ram, OSX 10.9.4, Adobe Premier Pro CS6 6.0.5, Adobe Media Encoder 6.0.2.81
Hope that helps anyone with the same prob -
Just recently I went about my usual workflow, doing everything in Lightroom I can and then completely the last touches in photoshop. Now especially if I sharpen in lightroom I am getting this horrible grain all over my photo when I open the exported lightroom image in Photoshop. It has nothing to do with zooming in on the image or anything.
Also, if I open the Lightroom exported image just as a photo and not in photoshop I do not see any of the grain that is appearing when I open it in Photoshop, what has happened here?*completing
-
why itunes 10.5 64 bit wont install on my 64bit hp probook ? when i run it my user account control asks me that do you want the following program from unknown purblisher to make changes on you on this computer?
program name :itunes 64setup.exe
purblisher:unknow
file location: hard drive on this computer when i click yes nothing happens
aditional ateps iv taken, uninstalled all itunes including quick time,banjour mobile updates ,everthing that has to do with apple products.went into window regestry and i dint find anything that has to do with apple in software bar
restarted my laptop several times, put the setup on a External USB but still nothing happens ,blowsed all most all sites on goggle no where iv seen this problem ,pliz who can help?why itunes 10.5 64 bit wont install on my 64bit hp probook ? when i run it my user account control asks me that do you want the following program from unknown purblisher to make changes on you on this computer?
program name :itunes 64setup.exe
purblisher:unknow
file location: hard drive on this computer when i click yes nothing happens
aditional ateps iv taken, uninstalled all itunes including quick time,banjour mobile updates ,everthing that has to do with apple products.went into window regestry and i dint find anything that has to do with apple in software bar
restarted my laptop several times, put the setup on a External USB but still nothing happens ,blowsed all most all sites on goggle no where iv seen this problem ,pliz who can help? -
Every time I try to open Firefox, my User Account Control asks if I want to allow Firefox to make changes to my computer. It never did this before until my brother messed while trying to download something for a printer. I uninstalled, then reinstalled it, hoping it would fix this, but it didn't. How do I fix this?
== About a week ago. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; CPNTDF)Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.
You also need to check the Properties of the firefox.exe program in the Firefox program directory. -
When i try to send email from my ipad i get the message The recipient "£)()&&£)" was rejected by the server. This has only just started to happen and I don't know why. Please can someone help. I have tried lots of things now and cannot solve it.
"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done. -
My mac has started sending yahoo emails out as if they were being sent from an old gmail account I haven't used in years. Why has this just started happening?
It is important to understand that Mail uses TWO servers, a Receiving Server and a Sending Server.
When you create a new mail message, or reply to a message, the Sender server is shown in the message composition window like this:
That drop-down window allows you to select which of the Sending Servers you previously set up should be used.
In general, once you choose a Sending server, its choice will "stick" for all future replies to messages from that Receiving mailbox. -
user account controls dialog box comes up before Firefox.
"Do you want to allow the following program to make changes to this computer?"
Yes launches Firefox, No closes the dialog box.Check that you do not run Firefox as Administrator.<br />
Right-click the Firefox desktop shortcut and choose "Properties".<br />
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.<br />
* Privilege Level: "Run this program as Administrator" should not be selected<br />
* "Run this program in compatibility mode for:" should not be selected<br />
Also check the Properties of the firefox.exe program in the Firefox program directory.<br /> -
User Account Control Problems with Premier Elements 7 32 bit in 64 Bit Windows 7
I found User Account Control Problems in other forums but didn't see much in Premiere Elements, so I hope this helps others who may be having problems with 32 bit programs in a 64 bit computor. When I first got my 64 bit I didn't have problems.
Back in February I bought a Quad Core Desktop with Windows 7 64 bit. Haven't been on the forum for 7 months since I wrote in regarding importing video with the Pyro AV Link (Premiere Elements Tips and Tricks). I was having problems importing video which started after March 28 sometime, as that was the last time I didn't have a problem importing VHS. Took me a few months off and on to find out what worked.
I started uninstalling Windows updates and any programs I had installed back to that point in time. Checked after uninstalling each item. The capture screen would come up on a delayed basis but clicking on capture did nothing. Although no driver is required for IE1394 (so they say) I read where some people using the Legacy driver had fixed some problems, so I switched to the Legacy. Seemed to work great (for a few minutes).
I had even uninstalled and reinstalled PE7 but no difference. Finally I noticed a shield in the PE7 Desktop icon. Thats weird. Never had that before. Just decided to show up after I had done all of the stuff I mentioned. Turns out at some point in time since I've had the computor Windows 7 decided to flag my 32 bit program as misusing the 64 bit system. User Account Control. I never bothered too much with UAC and just clicked on the yes box wen it popped up asking if I wanted this or that to take control of my computor. I tried using the minimum setting for safety reasons, and then finally turned User Account Control off. Bingo! PE7 capture works again and still working.
While I am not recommending that people arbitrarily turn UAC off, this appeared to be my problem. I would recommed that they try turning it off before uninstallin a bunch of stuff. Having a restore point may or may not have been a fix for me. I think one of the Windows Updates caused the problem but I am not going to uninstall any more stuff at this point, I have not been back on the internet or installed any more updates in my desktop. I am going to use my laptop for internet and used the desktop for video.
I am guessing this could be a problem for any 64 bit systems trying to use 32 bit programs. IE: XP,Vista,Windows 7 64 bit. In Vista there is also Data Execution Prevention (DEP) which you can turn on or off, supposedly to prevent misuse of memory (as I understand it), but Win7 either doesn't have it or I haven't found where it's located.
Maybe this has been covered in the forum somewhere and I missed reading it. Hope I am not too confusing. Anyway, whatever feedback you guys have would be great.John,
Thanks for your answer, and I did check out the link you suggested. However, I have Windows 7 Home Premium as most people have I think, and the XP program was not available. I started with Vista and now have Win 7. I never could navigate around in XP anyway so am content to just leave User Account Control off.
Interesting side note to turning UAC off is that my desktop seemed to be using more of the CPUs, where half of them were "Parked" as I wrote in also about 7 months ago when I 1st got my desktop. I am pleased to say that video processing seems to go quicker with UAC off. Have to observe things some more to confirm.
I just thought if others were having problems after installing Windows Updates and leaving UAC off worked then they could possibly pinpoint a problem. -
I have two user accounts on the same machine to monitor (different security levels). I'm in on the main account most of the time but I need to know when the other has unread emails (Yes, different email accounts and they can't see each other). I tried setting up a rule that would send a note to me (to my other email account) when a message arrives but (a) I can't get the rule to execute when the email arrives, and (b) I can't send a non-secure note (eg., "New Mail Waiting") - all I can do is forward the email. Is there any way I can do this without learning AppleScript and writing it myself? (Both user accounts using the same iCloud account)
Thanks,
DonThe "Rule" probably won't work when that user isn't signed in and/or being used. My suggestion is to sign into that email's account on the web service. Example if you have an icloud.com email account, go to icloud.com and go to the little gear in the lower left. Set the rule there. Rules set there should work all the time, since it's "on" all the time. Where as if the rule was set on the Mac Mail app, it has to be opened and what not.
KOT -
Ever since firefox automatically updated itself, I am not able to open websites in new windows - meaning that if I am on a website and you click a link on it that opens in a new window, that new window is blank. It used to work perfectly. I even checked my foxit reader and that it working well
Hello Angelika.
I should bring your attention to the fact that your user agent says you're using Firefox 3.6, not 3.0. I will remind you that Firefox 3.0 has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems.
As for your problem, you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author. -
Iphoto is deleting photos off my camera card and phone etc. after I am downloading them onto my mac. After the photos are downloaded it asks if I want to keep them or delete them and even though Im saying that I want to keep them!. Any ideas?
Review these Knowledge Base articles... they may help you:
Synchronizing media using BlackBerry Desktop Software on a Mac computer
BlackBerry Desktop Software Mac does not display evens and albums from iPhoto 9.4.2
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
When I click on a link in an email I get an error message. Only just started happening
When I click on a link in an email I get an error message saying:
General failure. The URL was xyz.... An error occurred when sending the command to the application# Press Alt+T
# Select Options
# Select Advanced Panel
# Select General Tab
# You will see option "Warn me when websites try to redirect or reload page"
# Uncheck it as given in the screenshot.
<img src=http://dl.dropbox.com/u/7456129/Firefox/advancedgeneraltab.jpg width=600px height=600px>
''<hr>Note: If anyone's reply has solved your problem, then please mark that reply as "Solved It" to the right of that reply after logging in your account. It will help us to concentrate on new questions.'' -
My iMac displays a white screen as well upon waking up, but I do NOT have it logging out when going to sleep. I too have to color in the screen with the mouse to see anything again. Is there a fix for this?
Ok, I've done everything suggested above except for running the Disk Utility from the recovery partition, as I will have more time to spend on it tomorrow and that's something I'm too scared to try in a rush....!
I've made a screenshot of the energy saving settings changed to your suggestion, could you let me know if that's what you meant?
I really appreciate your help by the way -
Encore CS4 asks if "Adobe can make changes to my system" before it will open
Because it now needs intervention from me, I
can no longer use Dynamic Link from Premiere to Encore, because the system will stall there.
I uninstalled Encore, and reinstalled. No change
I uninstalled Production Premium Suite, and reinstalled. No chamge
I uninstalled Suite, ran cleaner 3 times, rebooted, and reinstalled the suite. No change, and now Premiere will not open as well
Any ideas?That's your firewall or some other security tool blocking the socket/ port for DL. Not related to Adobe products at all. Create an exception rule or set it to self-learning mode.
Mylenium
Maybe you are looking for
-
I guess the title said it all - I didn't know there was a body for a post (as I said, I've never had a support issue or problem I couldn't figure out). But what I have is two Apple ID's with different email addresses. I'm sure the second one was set
-
3 partitions : MacOSX + Windows XP + Data
My new MacBook Pro will be here in a week (15-inch, 2.5ghz, 2go SDRAM, 200go 7200rpm, etc.). I'm going to install Windows XP SP2 on it. I've been reading a lot of articles about installing Windows on a MacBook Pro and I guess I'm now familiar with mo
-
hello. I had a problem with my iphone 6 lcd display. Suddenly while using my iphone, the display got distorted with vertical bars of different colors. Also I wasn't able to touch the screen and unlock it after locking it. I restarted it a couple of t
-
BTF : Add Image in BTF editor in WebUI
Hello Everyone, I have added a view as a assignment block in standard component, everything is working fine, the text gets added to the BTF editor, however, When i insert the image, it shows up as a empty box with nothing inside it. Although this is
-
Hi All, I am trying to create a package for corporate deployment. I have created a relevant package using SAPADMIN.exe and we use Novell Zenworks 4 for deployment. When we push the package using the following command line: D:\SAP\Install\setup.exe :p