When pressing on the home button the applications do not always close.
Sometimes...not every time, when I try to close an application the home button does not work. I need to press it several times and other times it responds immediately. Any ideas what is wrong?
kastefam wrote:
Sometimes...not every time, when I try to close an application the home button does not work. I need to press it several times and other times it responds immediately. Any ideas what is wrong?
This is not how you close an app. this is the method that you employ to return to the home screen.
Try this for a home button that is misbehaving. Close all apps and restart.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
That is how you close apps.
If the home button still misbehaves, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Similar Messages
-
When I press to the left of the home button, the screen lights up
When I press to the left of my home button, the screen lights up as if I were pressing the actual button. This causes Siri to pop up randomly all the time and my phone keeps accidently taking screen shots. Should I take it in?
I was a little confused when I first read this, but I think I understand what you mean now. The bottom left part of the glass on the front of the iPhone, by the home button, can cause it to act like you're pressing the home button. I do not experience this issue on my iPhone 5. This is probably a small defect in your iPhone. It isn't major, though, I'm sure if you visit the Genius Bar in your nearest Apple Store, you can get advice from the experts on what to do.
-
I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?
More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed
-
If I press the home button it says ipad not set up then gives me the option to continue I press that and am back to a screen which says joining other network, can't press anything on that. It's been like it for about half an hour now. help.
Hello Netski1961,
Thank you for using Apple Support Communities!
I have 2 recommendations here. First from article iOS: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430:
Restarting your iOS device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
If you are unable to continue, try resetting the phone with this from the same article:
Resetting your device
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
Cheers,
Sterling -
My iPhone 5 every time I close out of an app by pressing the home button a white blob shows up close to the volume buttons, is that normal?
Hi Sabrinann21,
I'm not sure what you mean by the "white blob." Does it look something like this?
If so, that white circle that you see on the right side of the screen is Assistive Touch and can be turned off in the Accessibility settings on the iPhone.
Use AssistiveTouch on your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-ca/HT202658
If this is not what you are referring to, perhaps you can reply to this post with a screenshot of your iPhone?
Take a screenshot on your iPhone - Apple Support
https://support.apple.com/en-us/HT200289
Have a great day!
- Judy -
So , It was Late At Night And I Put My Ipad On The Chager , And When I Woke Up It Is Not Turning On , Or It Is Not Charging , I Tried To Reset It By Holding The lock button And The Home Button But It Is Not Working
Hello ipadisbroken,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Have a nice day,
Mario -
Nothing is working on my 3rd gen ipod touch but the home button. It's not sliding or anything. I've tried resetting and restoring it. Did not work
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing
Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.
-
When I press the home button my iPad won't go to he home page. It is as though the button isn't working properly?
Try this to calibrate your home button:
Open a stock iOS app (e.g., Clock). Once the app is open, press your iPad’s power button until the ‘slide to power off’ screen appears. From that screen, press and hold your Home button until iOS force quits the stock app you have open. You’re done! -
My iphone 5 randomly shuts down, locks itself inside the time limit, takes pictures sometimes when pushing the home button, (not always). any clues? I`ve tried the backup and restore option. nothing changed?
It may be eligible for the following: https://ssl.apple.com/support/iphone5-sleepwakebutton/
-
The home button on ipad2 is not working since the iOS 6 update
I've updated to the latest IOS 6 system and now the home button is either freezing or not working. Can't get out of apps unless I reboot. Upon rebooting, it doesn't work & if I open an app, it doesn't work again.
Need a fix.Hello ipadisbroken,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Have a nice day,
Mario -
my 4th gen ipod touch says ..... IPOD DISABLED connect to ITunes. I connect to Itunes ...Itunes says it cannot recognize or communicate with the Ipod till i enter the passcode. Does anyone know what to do?
Connect the device to the iTunes the iPod is normally synced with in recovery mode and restore it. See this article for instructions on getting the iPod into recovery mode.
iOS: Unable to update or restore
B-rock -
Does not return to the Home screen after you press the Home button
The buttons do wear out, and when they do you'd need to get the phone serviced.
-
my ipod wont turn on, its a ipod 5th gen- I turned off my ipod and then when I went to check it later it wont turn on this is the second time it happened, I tried to charge it its not recognizing it, I have heard that you can try to press the power button and the homebutton to make it work, when it happened the first time I did that and it worked but since my home button isn't working what can I do, can I try to fix it or do I have to go to apple and ask, can anyone help me plz
Hello, pravin729.
Thank you for visiting Apple Support Communities.
I understand that your iPod touch will not turn on. I would start with going through the troubleshooting steps in the article below.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
http://support.apple.com/en-us/HT201412
Cheers,
Jason H.
Maybe you are looking for
-
Vista SP2 and Access connections requiring manual reconnect
Hi, I'm experiencing a problem after the installation of Windows Vista SP2 on my Vista Business. After a reboot, I must always manually 1) disconnect the WLAN connection and then 2) reconnect to establish a working WLAN connection and to gain access
-
What's happening with LArch?
What's the current status of LArch? The last update on the website says that since Arch dropped AUFS support, LArch doesn't work. Have there been any workarounds? With linux-aufs_friendly in AUR, is it possible to make LArch work? If yes, does that k
-
4.6 CIN issue could u please solve
Version 4.6 Could u please clarify this PROBLEM that when i make PO all duties is calculated correctly & same will be copied when I make planned delivery cost in invoice through MIRO, Then if I go to J1IEX for capture the duty the default values from
-
REQ: Repeated tags in m4a songs
Requesting features for future iTunes updates Allow iTunes manage repeated tags from m4a songs for add more than one artist or more than one composer, for example M4A format is able to store repeated tags in same file (two or more tags for "Artist",
-
What are the rules about switching versions?
I thought projects created in iMovie 9 showed up in iMovie 10, but I just tried creating a new project in iMovie 9 this morning and it is not showing up in iMovie 10, even though I see projects from 2013 and before in there. Also, what are the rules