When Primary link restore back route still learn via CE_HQ instead MPLS

Hi Sir,
Please refer my issue as below and attachment for log captured;
1) When primary link down at CE_Branch_1, it will triggered the ISDN to CE_HQ to communicate.
2) When the primary is up again at CE_Branch_1, the ISDN will be disconnected.
3) At CE_HQ, when show ip route the 10.106.15.0 network still appear in static route instead of OSPF route. Hence, LAN user at CE_Branch_1 will not able to access HQ anymore.
4) When sho ip route vrf COURTS at PEWBRF1, you can notice network 10.106.15.0 is still learned via 202.178.128.70 and not 178.28.0.20.
5) Have tried to manipulate the route-map with set local-preference = 50 and set weight = 0 for network 10.106.15.0 that being redistributed from OSPF into MPBGP at PEWBRF1 still doesn’t help. Furthermore, I encounter the route have become RIB-Failure when show ip bgp vpnv4 vrf COURTS.
6) At CE_HQ, there is floating static route being configured to point to CE_Branch_1’s LAN, ip route 10.106.15.0 255.255.255.0 128.1.1.15.
7) When show ip bgp vpnv4 vrf COURTS 10.106.15.0 and show ip route vrf COURTS 10.106.15.0 at PEWBRF1 the route 10.106.15.0 still prefer to come from CE_HQ. This is the problem, now the CE_HQ can not reach CE_Branch_1.
Please advise.

Folks, this is typical working when using OSPF. Using OSPF the down bit is set on LSA (not all of them but I dont need to go down that far). Because the router is redistributing the static routes into OSPF the PE router shall receive the routes via the mpls cloud from that redist point. It will then get them back from the original PE-CE but these will never come in. You have GOT to configure sham-links between any area (PE)s that have a backdoor between them. If the ISDN line is using OSPF then what happens is that the routes across the ISDN line appear as "O" routes and the routes from the PE-CE conenction appear as "IA" routes. Hence the ISDN line is the preferred path. Read up on sham-links as they go into the real detail of why this happens. Once you get used to what is happening it all rather makes sense. :-)

Similar Messages

  • Error -1 when trying to restore and update iphone 4s

    After trying to update to new software 5.1 i got Error -1 when trying to restore and update iphone 4s via itunes

    here part of iphone upadate log may help, i could not post all log it's too long
    update_baseband: requesting baseband firmware data
    update_baseband: received data from host (11207986 bytes)
    update_baseband: performing next update stage
    bbupdater: BEGIN: Perform stage at second
    bbupdater:           BEGIN: Sending 1 Images
    bbupdater:                     Waiting for Hello...bbupdater:                     OK
    bbupdater:                     Hello received boot mode:  ETLSAHModeMaverick
    bbupdater:                     Hello response boot mode:  ETLSAHModeMaverick
    bbupdater:                     Hello reserved fields:  02
    bbupdater:                     Starting Maverick Protocol
    bbupdater:                     Sending Erase Response: Length 12 Type 161
    bbupdater:                     Erase EFS 0
    bbupdater:                     Checking Manifest Request: Length 40 Type 162
    bbupdater:                     Sent Manifest with length 586
    bbupdater:                                DBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
    bbupdater:                               OSBL_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
    bbupdater:                               AMSS_HASH: 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00
    bbupdater:                     Sending Hash Response: value 1  success 1
    bbupdater:                     Disconnecting...bbupdater:                     OK
    bbupdater:                     Waiting for Hello...bbupdater:                     OK
    bbupdater:                     Hello received boot mode:  ETLSAHModePending
    bbupdater:                     Hello response boot mode:  ETLSAHModePending
    bbupdater:                     Hello reserved fields:  02
    bbupdater:                     Sending Image 'OSBL'...
    bbupdater:           0x6e050 of 0x6e050 (100 percent)
    bbupdater:
    bbupdater:                     Took 0.229405 seconds
    bbupdater:                     Disconnecting...bbupdater:                     OK
    bbupdater:                     Waiting for Hello...bbupdater:                     OK
    bbupdater:                     Hello received boot mode:  ETLSAHModeComplete
    bbupdater:                     Hello response boot mode:  ETLSAHModeComplete
    bbupdater:                     Hello reserved fields:  02
    bbupdater:                     Sending Image 'ELF'...
    bbupdater:           0x32000 of 0x12c0000 (1 percent)
    bbupdater:           0x6013f of 0x12c0000 (2 percent)
    bbupdater:           0x885000 of 0x12c0000 (45 percent)
    bbupdater:           0x1085000 of 0x12c0000 (88 percent)
    bbupdater:           0x119b000 of 0x12c0000 (93 percent)
    bbupdater:           0x12b1000 of 0x12c0000 (99 percent)
    bbupdater:           0x12c0000 of 0x12c0000 (100 percent)
    bbupdater:
    bbupdater:                     Took 6.138110 seconds
    bbupdater:                     Disconnecting...bbupdater:                     OK
    bbupdater:           END: Sending 1 Images
    bbupdater:           Waiting 4 seconds...bbupdater:           OK
    bbupdater:           BEGIN: Preparing Initial stage
    bbupdater:                     Requested boot mode:  kBBUBootModeNone
    bbupdater:                     Creating transport, attempts remaining 0...bbupdater:                     OK
    bbupdater:                     Modem booted
    bbupdater:                     Ping failed, 9 tries left
    bbupdater:                     Ping failed, 8 tries left
    bbupdater:                     Ping failed, 7 tries left
    bbupdater:                     Ping failed, 6 tries left
    bbupdater:                     Ping failed, 5 tries left
    bbupdater:                     Ping failed, 4 tries left
    bbupdater:                     Ping failed, 3 tries left
    bbupdater:                     Ping failed, 2 tries left
    bbupdater:                     Ping failed, 1 tries left
    bbupdater:                     Ping failed, 0 tries left
    bbupdater:           END(kBBUReturnIOError): Preparing Initial stage
    bbupdater: END(kBBUReturnIOError): Perform stage at second
    send_bbupdate_status: sending baseband update status to host
    update_baseband: bbupdater error: kBBUReturnIOError
    0: RamrodErrorDomain/3ec: update_baseband: failed to perform next stage
    1: BBUpdater/10
    unable to convert ramrod error 1004
    attempting to dump restore log
    writing log file: /mnt1/restore.log

  • My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. Please help!

    My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. I've uninstalled and reinstalled all that the steps told me to, I've updated everything in my computer. I don't know what else to do. My phone will just show the apple sign and the itunes plug in sign.

    Hey Carolefromthelou,
    The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

    I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

    Hello there, Minig1501.
    The following Knowledge Base article has some information on the message you're receiving:
    Unable to use Apple Push Notification service (APNs)
    http://support.apple.com/kb/TS4264
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

    My ipad 2 camera stop functioning when i switch from back to front? Anyone can help me? i have already restore my ipad2 but the problem is still recurring.

    Abelynn-
    Does the problem occur in both Camera and Photo Booth Apps?  If you run the FaceTime App, does the front camera work?
    If the front camera never works, you may have a defective iPad.  If you are near an Apple company store, the Apple Store Genius can verify the problem, and may replace it on the spot.
    If the front camera works for at least one App, try rebooting the iPad.  Hold down both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  After a couple of minutes, the iPad will restart.  Rebooting will not hurt anything, and may correct your problem.
    Fred

  • Something happened to my phone and lost all contacts.I did not know this and backed up my phone.When i tried to restore back up the contacts were still not there.How to access older back up?

    Something happened to my phone and lost all contacts.I did not know this and backed up my phone.When i tried to restore back up the contacts were still not there.How to access older back up?

    Her contacts would be wherever she put them
    The iphone is designed to be synced to your computer or cloud service regularly.  If she failed to do this, then they are likely gone.

  • Computer tend to freeze when accessing internet with D-Link dir-655 router

    I recently bought a D-Link dir-655 router and since then my computer tend to freeze up completely when accessing internet. This also happens when certain programs access internet. Otherwise I am usually using Internet Explorer or Opera.
    I've found that there are many who experience problems with D-Link router, that they may have problems with certain network card. Anyone who can say if this is a known issues and if it there is a solution or if it is better to buy another router?
    Model #: HPE-140sc
    Product #: WC779AA-UUW
    Software-version#: A1PNv6PrA2 
    PCBRAND: Pavilion

    Hi, Ernst:
    Would you consider backing up your files and doing a system recovery?
    Maybe the OS has some corrupt registry files or something.
    If you recover and then it still does that, your only choice looking at the motherboard is a PCIe gigabit ethernet adapter which would be relatively easy to install, or you could even get a USB ethernet adapter and not even have to open the case.
    See if there is a setting to disable the onboard NIC if you have to add a network card.
    I would rule out all software problems before buying hardware.
    If you want to try some other malware program, I recommend the free Kapersky rescue disk. You burn the file to a CD and boot from it.  It scans the drive and deletes any malware or virus files it finds without the PC being in windows. A lot of times viruses and malware can't be removed when windows is running.
    Link to the download and instuctions for use is below. I like to use the graphic interface rather than the text interface.
    http://support.kaspersky.com/faq/?qid=208282173
    Paul

  • I want to learn how to restore back up

    ok so i have an iphone 5 and i want to restoe back up in here at 5pm i backed up my phone on itunes then restored it to factory setting then set it up as new iphone later on at 7pm when i plug my iphone to restore from back up. my phone started syncing automatically and it started backing up automatically now when i click restore from back up it has my 7pm back up not my 5 pm back up. so please help me locate my back ups on my mac and help me delete the 7pm back up so

    ya i know that, thats why i said i do not have a mac yet. i know there is a way to learn how to code and learn a particular lanuage in the mean time while i save up for a mac. but which book would you refer me to so i can start studying. i am taking computer sciences but not this semester so i just want to get started on learning already. soo please help a fellow man out.
    and i still need to learn how to read objective c in order to use that. i cant just download that and start making apps.
    like seriously cmon be more specific with me people...
    soo do you suggest i buy a book on how to use objective c while i save up for a mac before i can use "xcode?"
    or if i buy a mac , i can some how magically start creating apps for the app store without knowing how to code?...
    please help me out.. no one ever gives a percise answer to how a beginner can learn by himself

  • I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    Hold the home and power button down until your phone restarts. If that doesn't work, backup and restore using iTunes.

  • I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

    I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.

    I don't see an issue, but if you mean why didn't you get most of your memory back you need to see what else is using storage. Go to Settings/General/Usage. Wait a bit for it to calculate storage allocation, then when it finishes you can see how much storage each app uses.

  • Just downloaded ios 7.0.4 for my iphone4 and backed up before doing so. Now that it's been updated and restored I keep being asked to setup my iphone. When I select restore from itunes I keep getting stuck on setup iPhone. Cant get back in phone!

    I backed up the phone and updated to ios 7.0.4 which took about 2 hours.  Now the phone powers on and says hello in different lagnuages and says to slide to setup.  I am asked to choose a network and then if I want to setup as a new iphone, restore from icloud or restore from itunes backup.  When I select restore from itunes the screen says "connected to itunes".  In itunes I select restore from backup however after a few seconds itunes says that it cannot restore beause there is not enough free space on the iphone.  During this attempt to restore I see the home screen and my screen saver and everything for a split second, then the phone powers off.
    I see in itunes that all of my photos and data are still on the phone however I cannot get into the iphone.

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • , I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive. Still syncing with i-Pod but playlists lost , podcasts no longer syncing, Can't play music .. how to restore back to original state .

    I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive.Cant play any music as it "can't find" the library  Still syncing with i-Pod but playlists lost , podcasts no longer syncing.   How to restore back to original state . I have tried re-installing  - with no change

    I do the same thing as you do...
    My music is on an external drive as to not use up gigabytes of storage that need not be used for media.
    There are a couple basic principles to iTunes that I believe you should know.
    1. iTunes is not a media storage program. It does not store your media "in iTunes". It simply is an organization tool for your media already on a hard disk.
    2. As iTunes is not a storage mechanism, it has no way to "know" whether or not the media that is listed is actually there. This is where the "design" of iTunes comes into play.
    I like to think of iTunes as a bread-crumb trail. The "music" in iTunes, isn't actually there. The bread crumb is the location on the external hard drive.
    If that bread crumb trail disappears (in this case the external drive you use). If said external drive is not plugged in, that bread crumb trail is not able to be followed. iTunes is "lost" and unable to find the media. The only way to remedy this is to place the media on your local drive.
    To address your issue of the library. If you hold down shift, you can select your library on your external drive. It will be a file with an .itl extension. The folder name will be your external drive.
    I go into edit > preferences > advanced and set my library to the correct location. Make sure you check the box "Copy to iTunes Folder when importing" (or whatever it says).
    You can't fix the issue of iTunes not seeing the media if your drive is unplugged unless you physically move the content to your OS HDD...Or any other HDD you use.

  • Updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

    updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

    Maunally restore it. In order to do this:
    -Download the iOS 5.1.1 firmware from here  http://www.redmondpie.com/download-5.1.1-ios-for-iphone-4s-4-3gs-ipad-ipod-touch -direct-official-links/
    1. After downloading the firmware from the given link, open iTunes and click on your device.
    2. Now press SHIFT on your keyboard and while pressing it click on "Restore".
    3. A dialog box will appear.
    4. Select the firmware you downloaded and click ok.
    5. Done!!! Your iPhone will now be restored to 5.1.1 and if you had backed up your iPod before, then you can put all its settings afterwards.

  • How to restore back my contact when I accidentally delete on iCloud

    How to restore back my contact when I accidentally delete on iCloud

    Basics of File Recovery
    Files in Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location.  OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone.  Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • After restoring my ipod, nothing shows up when I sync it back up.

    After restoring my ipod, nothing shows up when I sync it back up - why?

    Have you double checked to make sure content is still configured to sync to your iPod via its Music, Podcasts,Photos, etc., configuration tabs in iTunes?
    To access these tabs, plug your iPod in and select it from under Devices in the left hand pane of iTunes. Over to the right should be multiple tabs for the different kinds of content you can sync to the Nano. See this article for more information and assistance.
    iTunes: Syncing media content to iOS devices and iPod
    Make sure that you also don't have the Manually manage music option enabled from under the iPod's Summary tab if you want your iPod to sync with iTunes instead manually adding and removing content from the device.
    B-rock

Maybe you are looking for