When printing a book to PDF, bookmark definitions are not saved

I recall seeing another post about this issue and I can't find it now, but none of the workarounds mentioned there worked for me, so here goes:
I am working on a book migrated from FM 9 to FM 11, and when I print to PDF, I specify the bookmarks I want to display in the Bookmarks tab of the PDF Setup for Selected Files dialog. The PDF prints fine, but when I want to print the book again, FM doesn't remember my settings, forcing me to set the bookmarks from scratch every time. This has proven pretty tedious seeing that I'm working with an old book in which the styles aren't intiutive, so trying to remember all of them every time isn't the best of fun. When I print a single file in the book, the settings are saved properly.
In the previous post, I remember reading that this was a bug in FM and trying the following suggested workarounds (none of which worked): Switching to structured mode; saving the desired setting in one file in the book, printing that document, and then printing the book (was supposed to result in FM remembering the settings for the entire book); saving the book right after it prints; selecting all files in the book and saving as PDF, as opposed to selecting the book and then File > Save as PDF.
I'd be glad to know if anyone has any ideas, or if Adobe are planning to post a fix for this issue.

It is my understanding that FrameMaker uses the setting stored in the first document of the book when creating a PDF from a book. So, open the first file in the book and make a PDF, setting your bookmarks as you want for the whole book. Then create the PDF of the book. Check the settings before you click Print to make sure they are what you want. You may have to make a few changes, but it should remember them the next time.
I work with FM 9, so this may not be relevant to FM11. I find it necessary to open the PDF settings dialog each time I make a PDF of a book, and click Save/OK/whatever, to make sure the bookmarks are created correctly. The settings are always correct, no changes needed; but I find it necessary to open the dialog and close it to get the bookmarks correctly indented in resulting PDF. It may have been fixed in FM11.
Van

Similar Messages

  • When printing Gantt chart, some of the bars are not appearing in it

    When printing Gantt chart, some of the bars are not appearing in it
    I have added print tag in xml of chart mode-multiple pages.
    <print mode="MultiPage" print_all_columns="true" />
    For printing, I right ckicked on chart and clicked on Print chart..
    Edited by: Sheetal on Mar 29, 2012 2:46 AM
    Edited by: Sheetal on Mar 29, 2012 2:51 AM
    Edited by: Sheetal on Mar 29, 2012 2:56 AM

    Sheetal,
    Did you ever find a reason as to why the bars were not printing? I'm experiencing the same problem with Apex 4.1.1. Only the first part prints. Here is the print tag:
    <print mode="MultiPage" print_all_columns="true" columns_on_every_page="2" fit_timescale_to_end_of_page="false">
    I've changed some of these settings to no avail.
    -Seth.

  • HP Photosmart C4795 when printing addresses and return addresses on envolps are not lined up.

    The return address or mailing address when printed on the envelop are not ligned up correctly on the envelop in the correct location. The Return Address is printed in the middle top of the envelop instead on the left upper corner, the Mailing address is printed to far to the right of he envelop.

    x3,
    Follow these directions and check these settings to print envelopes from Microsoft Word.
    Click Tools , click Letters and Mailings , and then click Envelopes and Labels .
    Type the Delivery and Return address information.
    Click Options .
    On the Envelope Options tab, set the following options:
    Envelope size : Set the envelope size to match the loaded envelopes.
    US only : Select Delivery point barcode to make it easier for mail sorting machinery to correctly route the envelope.
    Return address : Set the Return Address position .8 inch in the From left section for Size 10 envelopes only.
    Envelope Options tab
    Click OK .
    Select the Printing Options tab, and verify that the following settings are selected:
    Select the Feed Method option that shows the envelope on the far right side with the short edge first.
    Select Face down .
    Examine the selected feed method image and verify that the envelope flap is on the left side of the envelope. If it is on the right, select or deselect Clockwise rotation .
    Printing Options tab
    Click OK , and then click Print
    Let us know if it helps, Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • PDF XChange annotations are not saving (temp folder problem?)

    Hello,
    I'm having a problem with the XChange PDF viewer within Firefox:
    When annotating a file outside of Firefox, I can save the changes and have them reappear
    when I close and re-open the file
    Doing this inside Firefox, I cannot, it appears that the files are saved, but they do no
    reappear on re-opening. This is true even when annotating a file that is opened from my
    hard drive (as opposed to opening it from a website)
    Doing this inside IE, it works properly. However, I need to use Firefox here at work
    instead of IE or XChange separately.
    I believe the problem lies in the fact that when XChange/FF open a pdf inside FF, a file
    is created in C:\Temp and the changes are somehow being lost here. Interestingly, if I
    take the file opened within FF and open it in XChange outside the browser (by using the
    button in the bottom left of the viewer pane) I _still_ cannot save my changes, and I now
    get an error message along the lines of:
    ‘Error saving document to “c:\Temp\pdf38.tmp”:
    Error [IO subsystem]: Invalid access mode’
    where 'pdf38.tmp' is the name of the temp folder created when the original file was
    opened within FF.
    I didn’t have these problems a few months ago, so it’s something to do with the new
    versions of XChange and FF. Please let me know what you can do to fix this. I really
    like using XChange, but if this can’t be fixed I’ll have to switch to something else to
    do my work.
    == This happened ==
    Every time Firefox opened
    == Reinstalling latest versions of FF and PDF X-Change

    I wrote a ton of notes and I freaked out when it didn't work so I emailed the pdf to myself, and its the current version with all the notes that I had just taken.
    try it out! it worked for me

  • What is the issue? When printing a 30x42 drawing PDF with 5 pages. The first drawing prints properly, but none of th eothers do. IF I print each separately, by selecting "current page" they print fine. Oh this is for Acrobat XI Standard.

    RE Acrobat XI Standard. When printing a 30x42 Drawing PDF with more than 1 page only the first page prints properly the rest are not the proper size or centered. Did I miss a setting? For now I can work around it by printing each page using the "Current Page" setting, but this delays me when there is more than 20 pages etc..

    RE Acrobat XI Standard. When printing a 30x42 Drawing PDF with more than 1 page only the first page prints properly the rest are not the proper size or centered. Did I miss a setting? For now I can work around it by printing each page using the "Current Page" setting, but this delays me when there is more than 20 pages etc..

  • When printing from an online PDF, the page prints in extra large scale. How do I fix this?

    when printing from an online PDF, the page prints in extra large scale. How do I fix this?

    This can happen when Firefox has misread the paper size from the information supplied by Windows. Clearing it can involve finding some obscure settings, but here goes:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''print''' and pause while the list is filtered
    (3) For each setting for the problem printer, right-click and Reset it. The fastest way is to right-click with the mouse and then press the r key on the keyboard with your other hand.
    Note: In a couple other threads involving Brother printers, the preference '''printer_printer_name.print_paper_data''' was set to 256 and when the user edited it to 1 that fixed the paper size problem. If you see a 256 there, you can edit the value by doubling-clicking it or using right-click>Modify.

  • Changes to my bookmarks are not saved when firefox is restarted. I already tried deleting places.sqlite, but it is still doing this.

    Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.

    Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
    You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • When I sort bookmarks in "organize bookmarks" they are not sorted under the bookmarks pulldown menu. Latest additions are not integrated into the sort

    When I sort bookmarks in "Organize Bookmarks" they are not sorted under the pulldown menu on a regular page. Recently added bookmarks are not inegrated into to sorting.

    See this:
    [https://support.mozilla.com/en-US/kb/Sorting+bookmarks#Sorting_by_name]

  • I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

    I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?

    You can backup the bookmarks on the old computer and create a JSON or HTML backup and restore or import this file in the Bookmarks Manager (Bookmarks > Show All Bookmarks).
    You can use an USB stick to transfer the saved bookmarks file to the new computer.<br />
    You can also copy the places.sqlite file from that computer to have the bookmarks and the history.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • My bookmarks suddenly are not accessible. Each time I try to use a bookmark, the following message comes up on the error page: The requested URL /exec/obidos/subst/home/home.html/103-3592028-6560639 was not found on this server. The page error is ident

    My bookmarks suddenly are not accessible. Each time I try to use a bookmark, the following message comes up on the error page: The requested URL /exec/obidos/subst/home/home.html/103-3592028-6560639 was not found on this server. The page error is identified as "ERROR 404" I tried a clean install of the latest version; no luck. looked at plug-ins & add-ons; no luck
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Hi Mac Attack,
    My computer will not disconnect from the internet.  It seems to find a clone router and continues even when I shut down and unplug my my own home iy
    Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
    If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
    Have a look at your settings in Safari > Preferences. Especially General and Privacy.
    Reset Safari to remove cookies and other stored data.
    System Preferences > General
    Have a look at your settings in System Preferences >  Security & Privacy.
    Call back with more questions.
    Regards,
    Ian

  • Known issue: Cortana voice command definitions are not cleaned up after uninstalling the app (Windows 10 Insider Preview SDK and tools, April 2015 release)

    Voice command definitions are not removed from Cortana's cache when an app is uninstalled. This may cause conflicts between two apps that share the same voice commands.

    This issue should not impact your ability to reinstall and test the same application. However, you must reinstall the OS in order to reset the cache in cases where you are seeing conflicts between different apps.

  • In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    Please don't post the same question multiple times!

  • Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ?  My files are not corrupted after it is done like many other threads i have readed.

    Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ?  My files are not corrupted after it is done like many other threads i have readed.  Sometimes it's changing the title of a movie or editing the season and episode number of a TV show ect.....

    Yup same here
    I am running the latest iTunes, the latest updates to the OS and on an iMac 3.4GHz Quad core i7 with 8GB of RAM and the music stored on local HDD.
    Still locks up iTunes for between 2 minutes up to 20 minutes.
    Really annoying.
    If you find a fix please, please let me know, I have just been throwing hardware at it with no joy at all

  • I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

    I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
    After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
    How to pair show in a certain order, for example, sorted by name.
    grateful
    Julio Cesar

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

  • Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

    Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved

Maybe you are looking for

  • How to insert some records in one table and some records in another table

    Interview question how insert records in two tables by using trigger CREATE or REPLACE TRIGGER Emp_Ins_Upd_Del_Trig BEFORE delete or insert or update on EMP FOR EACH ROW BEGIN if UPDATING then UPDATE emp2 SET empno = :new.empno, ename = :new.ename --

  • I have error 53

    I have error 53 and can't update my iPhone either through iTunes or WIFI and now my iPhone is not working Help please .. !

  • Upgrade from XI 3.0 (SP17) to PI 7.0 (SP12): Best Practices

    Hi mates, I've a few questions regarding the upgrade to PI 7.0. If the upgrade process is done in phased manner i.e. DEV, QA, PRD in that order over a period of 3 weeks, How do we handle the transports from DEV->QA->PRD when DEV is 7.0 and QA & PRD o

  • How to migrate Stellent 7.5.1 custom layout component to OCS 10gR3

    Hi, I am in the process of upgrading stellent 7.5.1 to OCS 10gR3. There is a custom layout component in 7.5.1 wanted to find out how can I migrate the layout component. As probably there are changes in 10gR3 so want to find out how to migrate the cus

  • IWeb doesn't like photo pages !!

    Hello, Like everybody here, iWeb '08 is getting on my nerves because all of my photo-pages are ruined. Happily, my backup is untouched and is ready to be updated when a new iWeb will be realesed... please be quick to update this non working software.