When printing checks in Quicken 2010 using hp c6280 doesn't print correct, but prints ok HP PSC 2355
When printing checks in Quicken 2010 using hp c6280 doesn't print correct, but prints ok on HP PSC 2355 all in one printer i am using Windows XP. Checks print correctly when using Quickbooks on HP C6280 printer.
Hi Omar,
There are several things that can cause this issue. Check out the following link for steps you can take to resolve it:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lc...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution
Similar Messages
-
Problem with printing checks from quicken 2004 - using Vista (32bit) and Officejet J6480
I have used my quicken 2004 version with my old XP with no problems and HP officejet J6480 All-in-One. Just got a new computer and everything was going great until I went to print checks - it prints one line and then stops printing. I assume the problem is with the Vista - is the Quicken 2004 too old?
Hi , Welcome to the HP Forums! I noticed that you cannot print checks with Quicken, when using your HP Officejet Pro 6830e all-in-one on iOS. I am happy to take a look into this issue for you! Some questions for you: What version of iOS are you using? If you do not know the Operating System you are using, please visit this website. Whatsmyos.What happens when you try to print in TextEdit?Are you able to make copies with the printer? Copying Documents.Have you uninstalled the old printer software, and installed the software for your new printer? Once I know these answers, I will do some further research for you! Thank you for posting! “Please click the Thumbs up icon below to thank me for responding.”
-
Since installation of Snow Leopard 10.6.8 a week ago, I have not been able to print checks on Quicken 2006.
Now I find that Word 2004 will not "save as" and freezes.
Any help?Unfortuantely you are victim of bad timing. Apple did release a followup security update that fixes those issues. You can download it from:
http://support.apple.com/kb/DL1489
If issues still persist, the tip here:
http://snowleopard.wikidot.com/h-n
May help your Microsoft Office issue as far as duplicate font clearing. -
How to print checks from Quicken
Using HP C7180, Windows 7, can not print checks from Quicken 2013.
hi,
when i print check some cases the TDS value not getting.
it printing 0 value.
in fb03 the TDS value is there kindly clear my probelm urgent.
regards
praveen. -
Trouble printing checks with Quicken
I have a Photosmart C8180 and it prints photos and documents wonderfully...but when I try to print checks form Quicken, they get into spooling twilight zone. I've walked away and looked a couple of hours latter and still spooling. Any ideas?
JeffThanks Shawna,
I left a message on Quicken, (Intuit) site but have yet to hear a response. I will look into this site and pass on what I find.
Mr. Mom -
why does fcpx suddenly stops reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?
Could be systems logs or some other system file growing.
Use OmniDiskSweeper or DaisyDisk to map what's being used.
Regards,
Shawn -
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
When I try to access my Apple Account, I enter my password correctly, but don't gain access to my account. The prompt screen that asks me to enter my password re appears, I enter the password again, and the Enter Password prompt just re appears. Can someone pls help me with this Groundhog Day? My endgame here is to purchase a book f rom iBooks. Thx.
Hello,
Thanks for contacting Mozilla Support!
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
I'm trying to print Checks with Quicken. the print is 1/2 way across check with single and doubles
My printer is the HP Laserjet 1102W When I load a single or double check into the manual feed vertically taken from a 81/2 x 11 sheet of checks Quicken prints so that only the date and amount show up in the middle of the check. I have used these checks for years with the manual feed on a Laserjet 4 Plus. How do I get the printing to move so that it covers the whole check?
Howard WexlerBobreba wrote:
I am using Quicken Essentials 1.7.4 on a [Mac Pro, 2.8 Ghz Quad Core Intel Xeon with 16 Gb of memory], running 10.7.5. I am in the process of upgrading everything to work on Yosemite and Quicken seems to be the most difficult problem to overcome.
Thanks for your response and feedback.
I would recommend you continue with Quicken Essentials. As noted by others, it performs well on Yosemite.
My personal experience is Quicken 2007 for Mac also on 10.7.5 (with many reports of it both updated and successfully running on Yosemite) and I personally would not touch Quicken Essentials with a 10 foot pole -- BUT, if it ain't broke for you, don't fix it! -
Printing Checks in Quicken 2007
I just upgraded from a PowerMac G5 running Leopard to an intel MacBook Pro running Snow Leopard. With the G5, I have been printing checks with no problem on a HP LaserJet P1006, but with the new computer they print as if the paper is rotated 180 degrees. Rotating the check doesn't work, because it messes up the alignment.
I used the Migration Assistant to move all of my apps, docs, etc., and everything else seems to be ok.
Any help will be much appreciated-I really need this functionality!
Best, ErikWell, I installed Rosetta and downloaded the latest driver for the printer. Interestingly, Quicken 2007's Get Info box doesn't have the checkbox to open in Rosetta. Checks still print upside down.
I found a workaround, though: I "print" the check to Preview, then rotate it 180 degrees and print to the printer. I can live with that, but I hope someday to figure out what happened...
I'm going to leave this question unanswered for now, but thanks for the help! -
When an image is inserted here using clipboard, it appears in the editor, but it does not appear in
when an image is inserted here in forum po editor using clipboard, it appears in the editor, but it does not appear in the post. When the image is inserted from a file, it works
Im not completely sure, why you are pointing out the very same thing I'm pointing out too. If you re-read my original post thoroughly, you will find - at its very end - the sentence "When the image is inserted from a file, it works". Since I'm not aware of the way how to insert the image from a file in a procedure other, then clicking the "camera" icon, I hold such a sentence for more then enough to point out, that the camera icon works fine for me (if you re-read my post thoroughly and pay detailed attention of my expression "using clipboard", then you shall definitely evaluate this expression as covering both ways an image can reach the cliboard, eg. Copying from a graphical editor/processor or dragging&dropping a graphical file).
However more then this, your post does in fact NOT reply to the fact, why the WYSIWYG editor box allows the insertion of an image from clipboard, but then fails to upload it and thus it is not displayed in the post.
For the sake of completness, I must also point out, that your last sentence of your post "And that's what it is there for" does not bring much clarity about that thing - while I fully understand, as one can observe from my "When the image...it works" sentence, the functionality, purpose and propper handling of the "camera" icon, I cannot agree with such a behaviour of the editor, that allows an operation to be done (What You See) that does not affect the outcoming result (Is What You Get).
From the theory of designing (G)UIs one may learn, that in such a case the operation should either fulfill completly (eg. display the clipboard-inserted image in the resulting post) or fail completly in the beginning (when Pasting the image into the text), either silently (just not displaying the image in the editor field) or with an error warning such as "Insertion of images/bitmaps from clipboard is not permitted". For Windows-like environments (such as, but not limited to, Microsoft Explorer, KDE, Gnome, IceWm....) the change of the dragging cursor to display a kind of "No way" or "no entry" pictogram, is also advisable.
For the sake of completness of my reaction I also might percieve your last sentence as a kind of irony or sarcasm, which however I definitely do not find appropriate behaviour, more over I might call it an "arogant rudeness" in case of such a "VIP" member with more then 9000 posts in the time when this post is being written, with a hint of overworking, malicous intends, inattention, ego-centricism or any other personal failure(s) or a combination of them, that you should - in case they are present - definitely pay attention to in your private life.
Moreover, let me please point out, that Im not much pleased about the way this forum works with its users, since I find the bug I have discovered, only a small one (a category B one might say in the A-B-C scheme, eg. a category, that does not directly influence or prohibit the execution of the main business cases, however it may result in discomfort, data loss or operation repetition, such a category would be most possibly a category C in the A-B-C-D scheme). Therefore I must explicitly express my annoyance that you have the guts to handle the post I did like this, when - in my opinion - the post has been written in such a manner that it was merly a polite point out of a small bug, thus it was kept as brief as possible, but fully covering the description of the scenario, alternate scenarios and their outcomes. Moreover, I'm definitely displeased, that you allow yourself to post such a post, that - instead of exploring the matter - throws the whole matter on the head and inside-out, or, one may say, kicks the bucket, and forces the original author, in this case me, for re-accounting for himself, moreover the ambivalency of your post opens such many possibilities to account for, that the time and resources the self-accounting autor has to spent, heavily overweighting the importance, significance and impact of the bug itslef.
So let me please advise you for the next time:
- to explore posts with more thoroughness, evaluating their expressions and sentences much more deeply, rather then just glance through on their surface
- think twice before answering and try to figure out how such answer might be percieved
- try to do less posts, but with higher quality
- try to employ more politeness and correct behaviour
- approach the matter with more humble and curious attitude rather then with a "I-know-everyting-better" standpoint
With regards
Lukas Plachy
Misstypes corrected by rheingold. -
How to print check boxes in output using alv
send me replly immediately
hi
Program Name: ALV ON SECONDARY LISTS Creation: 02/01/2007*
SAP Name : YH634_0102007_ALV_LIST Application: *
Author : P.V.D.Veeresh Babu Type: 1 *
Description : This program is used to display secondary lists using *
ALV. *
Inputs: *
Tables: *
SPFLI - Flight information *
SFLIGHT - Flight *
SBOOK - Flight booking details *
Select options: *
N/A *
Parameters: *
NO *
Outputs: secondary lists with ALV *
External Routines *
Function Modules: *
REUSE_ALV_LIST_DISPLAY *
Transactions : No *
Programs : No *
Return Codes: No *
Ammendments: *
Programmer Date Req. # Action *
================ ========== ====== ==============================*
type-pools: slis.
*" Data declarations...................................................
Data declaration of the structure to hold layout details *
data:
fs_layout type slis_layout_alv.
*" Data declarations...................................................
Data declaration of the structure to hold spfli details *
data: begin of fs_spfli,
color(4) type c, " Color
check type c. " Check box
include structure spfli. " Spfli
data end of fs_spfli.
*" Data declarations...................................................
Data declaration of the structure to hold sflight details *
data:begin of fs_sflight,
color(4) type c, " Color
check type c. " Check box
include structure sflight. " Sflight
data end of fs_sflight.
*" Data declarations...................................................
Data declaration of the structure to hold sbook details *
data:
fs_sbook like sbook.
Internal table to hold list details *
data:
t_sbook like
standard table
of fs_sbook.
Internal table to hold list details *
data:
t_sflight like
standard table
of fs_sflight .
Internal table to hold spfli details *
data:
t_spfli like
standard table
of fs_spfli.
fs_layout-box_fieldname = 'CHECK'.
fs_layout-info_fieldname = 'COLOR'.
"........Retrieving basic list data containing spfli details......."
select *
from spfli
into corresponding fields of table t_spfli.
if sy-subrc ne 0.
message text-001 type 'I'.
endif. " IF SY-SUBRC NE 0
".................Calling function module for ALV..................."
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = sy-repid
i_callback_pf_status_set = 'STATUS1'
i_callback_user_command = 'USER_COMMAND1'
i_structure_name = 'SPFLI'
is_layout = fs_layout
tables
t_outtab = t_spfli
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message text-002 type 'I'.
endif. " IF SY-SUBRC NE 0
Form STATUS1 *
This subroutine gives pf-status for spfli list *
-->T_EXTAB excluding table *
form status1 using t_extab type slis_t_extab.
set pf-status 'STATUS1'.
endform. " STATUS1
Form USER_COMMAND1 *
This subroutine displays secondary list containing sflight details*
-->FS_UCOMM user command *
-->T_SELFIELD selfield *
form user_command1 using fs_ucomm type sy-ucomm
t_selfield type slis_selfield.
case fs_ucomm.
when 'SFLIGHT'.
perform display_list2.
endcase. " CASE FS_UCOMM
t_selfield-refresh = 'X'.
endform. " USER_COMMAND1
Form DISPLAY_LIST2 *
This subroutine displays sflight details on secondary list *
There are no interface parameters to be passed in this subroutine *
form display_list2 .
data lw_flag type i. " Flag
refresh t_sflight.
loop at t_spfli into fs_spfli.
if fs_spfli-check = 'X'.
"........Retrieving basic list data containing sflight details......."
select *
from sflight
appending corresponding fields of table t_sflight
where carrid eq fs_spfli-carrid
and connid eq fs_spfli-connid.
if sy-subrc eq 0.
lw_flag = 1.
endif. " IF SY-SUBRC EQ 0
FS_SPFLI-CHECK = '0'.
fs_spfli-color = 'C510'.
modify t_spfli from fs_spfli .
endif. " IF FS_SPFLI-CHECK EQ 'X'
endloop. " LOOP AT T_SPFLI INTO FS_SPFLI
if lw_flag eq 0.
message text-003 type 'E'.
endif. " IF LW_FLAG EQ 1
".................Calling function module for ALV..................."
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = sy-repid
i_callback_pf_status_set = 'STATUS2'
i_callback_user_command = 'USER_COMMAND2'
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
tables
t_outtab = t_sflight
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message text-002 type 'I'.
endif. " IF SY-SUBRC NE 0
endform. " DISPLAY_LIST2
Form STATUS2 *
This subroutine gives pf-status for secondary list. *
-->T_EXTAB Excluding table *
form status2 using t_extab type slis_t_extab.
set pf-status 'STATUS2'.
endform. " STATUS2
Form USER_COMMAND2 *
This subroutine gives secondary list containing sbook details *
-->FS_UCOMM user command *
-->T_SELFIELD selfield *
form user_command2 using fs_ucomm type sy-ucomm
t_selfield type slis_selfield.
case fs_ucomm.
when 'SBOOK'.
perform display_list3.
endcase. " CASE FS_UCOMM
t_selfield-refresh = 'X'.
endform. " USER_COMMAND2
Form DISPLAY_LIST3 *
This subroutine displays sbook details on secondary list *
There are no interface parameters to be passed in this subroutine *
form display_list3 .
data lw_flag type i. " Flag
refresh t_sbook.
loop at t_sflight into fs_sflight.
if fs_sflight-check eq 'X'.
"........Retrieving basic list data containing sbook details......."
select *
from sbook
appending corresponding fields of table t_sbook
where carrid eq fs_sflight-carrid
and connid eq fs_sflight-connid
and fldate eq fs_sflight-fldate.
if sy-subrc eq 0.
lw_flag = 1.
endif. " IF SY-SUBRC EQ 0
FS_SFLIGHT-CHECK = '0'.
fs_sflight-color = 'C910'.
modify t_sflight from fs_sflight.
endif. " IF FS_FLIGHT-CHECK EQ 'X'
endloop. " LOOP AT T_SFLIGHT INTO....
if lw_flag eq 0.
message text-004 type 'E'.
endif. " IF LW_FLAG EQ 1
".................Calling function module for ALV..................."
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_structure_name = 'SBOOK'
is_layout = fs_layout
tables
t_outtab = t_sbook
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message text-002 type 'I'.
endif. " IF SY-SUBRC NE 0
endform. " DISPLAY_LIST3
regards,
veeresh
null -
When I updated firefox from version 3.6.16 to 4.0 the program would not open on the desktop after I double-clicked the short cut on the desk top. I checked the processes running on the computer and it showed firefox running. I followed the short cut to its file and clicked on the executable file with the same result(it won't open). I went back to the previous version and it works fine. What could be the problem?
Hey djclark24,
Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
There is also a lot of useful stuff in the [[Firefox crashes]] Knowledge Base article.
You could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps! -
When I do a mail merge using an excel document it transfers correctly except the Zip Code part
I have a Word Document that I use to send out advertising letters in the mail. I get the information from an excel spreadsheet that i put together and it usually works out fine but recently after i have done the mail merge the Zip Code is not coming out.
It only shows as a zero "0".
I have maybe around 200 letters that i send out every week and after like the 1st 10 pages the merge doesn't work on the Zip Code.
Could you please let me know what I can do to fix it?
Both the Word and Excel Versions are 2007
Thanks!
Cynthia.One thing I have done before when getting similar issues is changing the "ZipCode" field to a text field instead of a
number field. This is done in the field properties.
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional -
When I check my version of firefox it is version 3.6.10 but google says I am running version 2
For quite a while when visiting youtube I would get a pop up telling me I have an old browser. I am running version Firefox 3.6.10 and always do updates when available. Just now I tried to add some Firefox add ons and got a similar message that I have an old browser. The google site "which browser" tells me I have firefox 2!!
What the heck is going on here and or how do I fix it?
Thanks!You have a user agent that identifies you as Firefox 2.0.014
<blockquote>Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14 VRE Toolbar 1.42</blockquote>
You can check the general.useragent prefs on the about:config page.<br />
You can open the about:config page via the location bar, just like you open a website.
Filter: general.useragent
If general.useragent prefs are bold (user set) then you can right-click that pref and choose Reset.
See [[Web sites or add-ons incorrectly report incompatible browser]] and [[Finding your Firefox version]]
See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
Maybe you are looking for
-
Can't get Run Time Prompts to pop up in Planning 11.1.2.1 on WebForm
Hi, Client is using Business Rules and not Calc Manager. I have a Webform that has a Business Rule attached with only Run on Save selected. In the BR there are various RTP's user needs to choose. When I navigate to the WebForm in the bottom left hand
-
How can I lock in (or pin) text box so it will scroll text within frame?
Stuck. Thanks
-
How to make a list of commands
Hi, I am making a VI to control a pump. I can communicate now with the pump ( thanks to you guys) but my promotor wants an easy acces list of commands to use on the front panel. For example RV00000900 is a command that is send to the pump an agrees w
-
I bought a new iPod 30gb video recently, and I can't do anything on it! I didn't have trouble in the beginning, but now, when I plug my iPod in to my USB port, it is recognized in windows, but not in iTunes. I have followed the steps outlined in the
-
The latest update - what does it fix??
The latest update - what does it fix and has it solved some of the problems mentioned in this forum regarding km/miles confusion and correct distance?