When Printing Form16, Error "Device types are unsuitable for ADS Documents"
When Priniting Form16 it displays a message in the taskbar "Device types are unsuitable for ADS Documents"
Regards,
Ranga
You need a special device/printer for ADS. Try doing some research on that error.
Similar Messages
-
Printer setting - Device type unsuitable for ADS documents - reg
Hai Expert
I am trying to generate print preview, From 16, I am getting error "Device type unsuitable for ADS documents"
guide me to where have to do corrections
Regards
VincentMay be you should try the right forum:
pk -
Error - Device type unsuitable for ADS documents
Hi,
I have created a print form using transaction SFP and i am doing test from transaction SFP
(Test function module )
/1BCDWB/DOCPARAMS
YCTC 0000000000
YCTCUSAGE 0000000000
Once i press f8 system asking for printer, then i have given printer name as LOCL and select print preview. then system giving error as
Cannot find PDL type for output device locl and Device type unsuitable for ADS documents
Can i anybody give info what i am doing wrong.
I have tested with FP_TEST_03 that also giving the same error
a®Hi,
I have tried with LP01 and with some other printers in the network its giving error that "Call contained error (02)"
I tried with all FP_TEST*
but no results
a® -
Device Type unsuitable for ADS Documents
Hi ,
Whenever we are using transaction PC00_M40_F16 for taking the print of
the form16. We are unable to get the print preview/print out . The
following error we are getting :-
Device Type unsuitable for ADS Documents
Kindly suggest the resolution ASAP
Regards
Vinay Patel
RCL SAP SUPPORTJeroen,
please go through SAP Note 685571. Not all the usual device types are supported when you use Interactive Forms for printing.
Regards,
Markus Meisl -
Device types are not suitable for ADS documents when printing Form16
In Form 16 , while printing the Form16 of the employee it occurs an error "Device types are not suitable for ADS documents" in the task bar.
Regards,
RangaCan you check
Note 1116245 - ADS Check List before sending message to SAP
and see which of the steps are not working for you?
Markus -
Error: Device type SWIN does not support page..
Hi All,
I'm working on smartforms which print sticker of size 5 cm width and 2.5 cm hight. I made page of same above mention size. but when i'm trying print this, it will show following error:
Device type SWIN does not support page for ZSTICKER(my page name).
Please do needful help ASAP.
-DharmeshHi,
You need to link your new page to a device type. Use transaction SPAD. Go into the device type and click on the 'Format' button, this will list the supported formats, switch to change mode and add your new page format (ZSTICKER).
Regards,
Nick -
Transport.of SAP script form , printer def and device type is not enaugh
I transported the SAP script form , printer definition and device types of a thermal printer.
On original system the printout is ok but on target system not. What should I do?Thank you for your fast answer
As the matther of fact I am technical person. I think Output type belongs to application. However the difference is visible in se71 ->Utilities->Printing test -> output device ->print preview.
As I wrote I transpored corresponding. SAP script form , printer def and device type -
when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System -
ESS Business Package Error: Period type not allowed for profile ESS
Hi,
We are trying to configure the business package for Employee Self Service on Enterprise Portal 6.0. We followed this SDN contribution <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a">ESS doc guide</a>
So far we have successfully deployed the business packages and followed all the configurations that were pointed out in the doc guide. Unfortunately when we try to access the Employee Self-Service portal pages (Overview, Employee Search, etc), we encounter this error:
Critical Error:
Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
Any ideas on how to fix this issue?
Regards,
JojoHi Jojo,
Have you solved the problem? If yes can you please help me even I am facing the same error.
this is very help full to me .
Thanks and Regards,
Shilpi. -
ERROR OGG-01148 programming error, data type not supported for column
I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support -
When using Exprt PDF, the choice of language for the document to be exported is sometimes very restricted, while sometimes many more languages are available. What's the matter?
Dear Mrs.,
I now add 2 print screens which show what I get when I try to export a PDF from Adobe Reader and which languages are available.
The same problem does not exist when I use the website.
I hope this gives you a clue.
Many thanks,
Jos MERTENS,
Advocaat. -
When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
Cannot change Transaction Type (COBL-RMVCT) for posted documents. (FB02)
Hi guys,
I'm encountering some problems with Document Change Rules. I already configured in SPRO the line item change rules for Transaction Type (COBL-RMVCT). I already set it to "Field can be changed" but the system still does not allow changes. I also set it for all account types and company code, but still no luck. I hope somebody can assist me since we require that the transaction type be editable for posted documents. Thanks!Hi
I am not sure about the reason for why the "changing" is not working.
However, thought I should give my experience and opinion on this.
I have not seen a system that allows "Transaction type" to be changed. If allowed, in my opinon it is similar to allowing the cost assignment field such as cost centre, profit centre or an order being allowed to changed. Thus should not be changed once posted. Further is these are allowed to be changed the imact to the prevous reported data will have to be estimated. E.g. if the transaction types are used for consolidation what is the impact of changing previous month data. -
Print option of lanscape rather than portrait for apprisal document
Hi SAP HCM Experts,
if we take a print of appraisal document from ESS/MSS we get Portrait form of print, but can we get it in landscape form print
Whether can have a print option of lanscape rather than portrait for apprisal document. if yes where we need to change in template.
I appreciate your help.
Thanks and regards
VijaiHi HCM experts,
any answer
I appreciate your help.
Thanks and regards
Vijai -
ABAP list report wont print on Z device type with Z format
Our developer have created a report which outputs data in ABAP list format and the standard format would not fit. We have since created a custom format and copied a device type in to custom device type. So we now have a custom format and custom device type. However when we print, it spools correctly and shows as green but the report wont print. The only thing that gets printed is
"Sort criteria AscdgDescndSubtotalGRAND TOTAL : X X PROJ" "
The abap list format is Z_100_500. Basically the report has 450 columns and hence we created this format.
I am not sure what this means. I have been advised by SAP to follow instruction on note 17895 - Adapting print list formats for customers however i cant fully comprehend point 5 of the note and I believe this is why it wont print. Has anyone adapted ABAP list using this note. Can you please let me know how i should go about printer initialisation mentioned in the noted.
We have checked everything however dont seem to get around the issue. Any ideas will be appreciatedNo comments
Maybe you are looking for
-
My friend and I are both using iPhones and our messages are not blue. Both of our I messages are turned on.
-
AS01 with reference to existing asset
Hello, I am trying to create a new asset with reference to an existing asset. In this case, the new asset will be in a different asset class from the original asset. The two asset classes have been configured for different depreciation terms. Howev
-
Calling SQL Server Script File in Hypersonic DB
HI All, I am using Hypersonic Database with java swing. To update the database, i am getting SQL Server script file through a webservice. The problem is i dont have any idea, how i can update Hypersonic Database with the SQL Server script file. Pleas
-
Dear All When I click on Audit Intersection in the web data grid FDM starts to open but then I get an error relating to Single Sign On not being setup correctly. HFM 9.3.1 Kindly help
-
Composite key in Time dimension
Hi All, I would like to know Time dimension with Composite key. I have a requirement where I want to store 2 Calendars in Time dimension table. for e.g : for one calendar Weekstarts from SUN-SAT and for another it is from MON-TUE DateKey Type WeekS