When printing from Iphoto the photo is cropped at the top

When printing from Iphoto, the image is not the same size as in Iphoto.  The top of the photo is always lost.
If I copy the image to preview and thence to Word the photo prints in full.....  Why?

Because you are printing a different size than the image - you give no details so one can only provide generalities
If you have an image that is 4:3 in dimensions and print it as an 8x10 image something has to give - it is the top or side of the image
Crop to the dimensions of the print - and you will lose nothing
LN

Similar Messages

  • Color off when printing from iPhoto if photo was scanned in.

    When I scan a photo to a file or into an application and try to print from iPhoto, the colors are off. Usually darker than they appear in the photo. If I do a direct print from the scanner to the printer the colors look normal (OK). Any idea if there is some type of adjustment for this?

    What color profile do the pics have? Is the printer set to the same profile?
    Regards
    TD

  • When printing from iphoto all photographs ar printed in a pop art style rather than as seen - how do I change this to printing the photo as seen

    When printing from iphoto all photographs are printed in a pop art style rather than as seen - how do I change this to printing the photo as seen?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    Damaged preference files can cause a varitety of problems which you wouldn't think it could. Deleting and regenerating the pref file is one of the basic fixes to try.
    OT

  • Printed photos from Aperture 3.2.1 have lines through them - don't get that when printing from iPhoto

    I recently downloaded Aperture 3.2.1 and after editing a couple photos (love that process!), tried to print them.  Both had horizontal lines across the entire photo.  I don't have this problem when printing from iPhoto.
    As an FYI, I have this problem when printing from PSE too, but worked around it by importing edited photo back into iPhoto and printing from there.  I don't want to do that with Aperture, because they have much better printing choices.
    I have a Canon MP 500 & a Canon IP 4300 - same issue with either one.
    I contacted Canon tech support and got this reply:
    We appreciate your correspondence regarding your PIXMA MP500. I am sorry that lines are printing through photos printed from aperture.
    If aperture is the only program the issue occurs with then the print setting in aperture will need to be changed. You will need to use the icc profiles for the paper you are using. For details changing the print preferences in aperture please goto: http://www.redrivercatalog.com/profiles/how-to-use-icc-color-printer-profiles-ap erture-3-canon.html
    I looked at the link and basically had a brain freeze.  It was very complex, and I was concerned that it was for Red River papers - I use HP paper.
    I called HP to get their instructions for icc color printer profiles - complete zero.  They said it's a printer issue and would be happy to sell me a HP printer.
    Please, can anyone help a struggling Aperture newbie?  I'm so frustrated.
    Thanks - Jma

    Hello Kirby,
    Your recap is correct.  I ran Apple Software Update and both programs are up to date.  I looked on Canon's site and there are no new firmware updates for either printer.
    When I select "print" in Aperture, I've selected the Canon MP500.   Under the "Rendering" section, the color profile offers six different selections that include the MP500.  I've tried them all.  They all have lines through them.  There is a note, in grey, beneath the Color Profile box, that says to "Turn off color management in the printer driver".  I have absolutely no idea how to do that, and I've googled it, to no avail
    Under "Render Intent" I've tried both selections - Relative Colorimetric and Perceptual.  Still, lines through both.
    This is really discouraging.  Both printers work perfectly fine - with iPhoto, so it's hard for me to justify buying a new printer.  And how do I know I wouldn't have the same problem with a new printer?
    Fingers crossed that this can be resolved.  I have several photos I'm supposed to be printing for gifts.  And if the problem is in Aperture or PSE, won't the lines still be there even if I use one of the online printing companies?

  • Skin Tones Look Wrong When Printing From iPhoto

    Hi
    I'm having trouble getting the caucasian skin tones to look right on photos printed with my Epson Stylus C86 printer on Epson Premium Semigloss paper. They look too pinky/purple when compared with the screen of the Sony DSC camera I shot them with and also my iMac's monitor. They just look wrong as though the subjects have a combination of bad sunburn, high blood pressure and are blushing at the same time!
    I've tried the following tips synthesised from other threads:
    1. Downloaded the latest set of drivers from Epson's website.
    2. Ensured that they are associated with the printer in ColorSync utility.
    3. Selected the Use ColorSync option when printing from iPhoto's print dialogue box.
    These made no difference to the default behaviour i.e. same color problems.
    Could anyone guide me to a solution? I would rather not have to use another application to print them if possible. I'm not used to my Mac not "just working".
    Thanks

    What color profile do the pics have? Is the printer set to the same profile?
    Regards
    TD

  • When printing from my Mac all of a sudden when printing from IPhoto the picture is really dark.  The test page off my HP color laser jet is just fine.  It is not the printer although older.  All of sudden it does not want to print correctly.

    All of a sudden when printing from my desktop Mac in IPhoto the printout comes out black.  My colors are fine on my HP color laser printer.  I have printed many times and now all of a sudden it is not printing.  A test copy from my printer comes out fine.  I really think for some reason something has changed just in the last few days.  Just communication with IPhoto and the computer.

    As long as your cartriges are full, put a photo on you desktop, highlight it , click COMMAND P and the print preferences window should drop down, and select your printer and photo paper.

  • Pink colour cast when printing from iphoto

    When I try printing from iPhoto to a Canon MG6150 I get a pink colour cast.  The preview shows correct colour and I'm running out of paper with my attempts to sort it!
    What has gone wrong as everything else seems fine?

    Do you get the same results if you print the same photos from Preview? If not then it's definitely an iPhoto issue.  If you get the same it's possibly more of a system issue or printer adjustment.
    Check the Color Options (Printer)  and Color Matching (iPhoto) settings in the print window. You might try tweeking some of them.  
    Your print window should have something similar.

  • When printing from iPhoto picture is printing on the top corner with just 1/4 of the total photo

    Can anyone point me to the settings that control printing final output?  My photos are coming out cropped to the upper corner with only the first corner of the photo printing.  All other printable programs turn out as they should.  No printer issues; photos from card to pribnter print as they should.

    Because you are printing a different size than the image - you give no details so one can only provide generalities
    If you have an image that is 4:3 in dimensions and print it as an 8x10 image something has to give - it is the top or side of the image
    Crop to the dimensions of the print - and you will lose nothing
    LN

  • Suddenly crashing when printing from iPhoto - IJPCFoundation plugin

    - worked fine 3 days ago, now - nope. When i try to print now i get the message that it quit unexpectedly while using IJPCFoundation plugin. I've changed nothing in my setup. what could have happened? what can i do?

    I selected the number you gave- not designer or graphic, etc...I did not see "WIDE", and got this: (you must be at this page to click agree to the terms to get it going though)
    Printer Driver v8.64
    Mac OS X (v10.8.x), Mac OS X (v10.7.x), Mac OS X (v10.6.x), Mac OS X (v10.5.8)
    epson14359.dmg - 34.8MB - posted on 09/16/11
    This file contains the Epson Stylus Pro 3880 Printer Driver v8.64.
    Note: Common Updater is not required with this driver.
    Installation instructions:
    Download the file.
    Double-click the downloaded file to create a disk image on your desktop.
    Open the disk image.
    Double-click the installer icon to begin the installation.
    Keep me up to date with Epson promotions and driver updatesPlease see Epson's Software License Agreement for the terms and conditions of your download. By clicking on the Accept button, you are agreeing to abide by the terms and conditions of the Software License Agreement.

  • Default Copies Setting When Printing From iPhoto...Help

    I have the latest version of iPhoto '08. In a previous version I needed to print 12 copies of a bunch of photos. Since upgrading every time I go to print it prints out 12 copies unless I remember to go to customize and change to 1 copy. The 12 copies is the "standard" setting. No other application has this problem. HELP. How do I get this back to default copies of 1. Thanks!

    Thanks for the very quick reply! I had tried that earlier but just moved it to the desktop and let iPhoto create a new one...that didn't work. However, moving it to the trash instead DID work. Strange. Thanks and the problem is solved now! Very much appreciated!!!

  • Firefox will not print correctly. When printing from Firefox it looks like it thinks the paper size is a 3 x 5.

    I tried re-installing Firefox 23.0.1. It printed fine for about 4 times and then it went back to the same problem.
    In order to get everything to print out I need to scale to "shrink to fit" but then it is so small I can't read it.
    I switched to Internet Explorer and everything prints fine.
    I have a Brother MFC9325CW printer. I have a PC with Windows XP

    Have you tried all explained in the [[Fix printing problems in Firefox]] or reset printer margins.
    #In order to check the margins, we need to go to ''File'' > ''Page Setup''.
    #Once this is done, switch to the ''Margins & Header/Footer'' tab.
    #Check what's set there under ''Margins''.
    The following are the default values for ''Margins'':
    '''Right''': 12.7
    '''Top''': 12.7
    '''Left''': 12.7
    '''Bottom''': 12.7
    Check these values accordingly and change them if necessary.

  • Different Colors when printing from Photoshop and InDesign CS3

    Different Colors when printing from Photoshop and InDesign CS3
    I have the following problem:
    When printing from Photoshop or InDesign to a PostScript printer, Adobe recommends to let Photoshop handle the colors (I use the German version, so I don't know the exact term used, it changes slightly in all CS3 apps anyway).
    The manufacturer however told me to let the PostScript printer handle the colors.
    When I chose this option in Ps's print dialog and then choose ISO Coated as the printer pfofile, the results are fine.
    But when I place the exact same image in an InDesign file and print from InDesign or export to PDF and print via Acrobat, again using "Printer handles colors", the results are the exact same as if I had used Ps and chosen to let Ps handle the colors (way too saturated and a bit too red).
    ·Photoshop CS3
    ·InDesign CS3
    ·Test image is a TIFF in CMYK Fogra 27 Coated (which is also the working color space in Ps and ID.
    ·Printer: Xerox Docucolor 3535
    ·Printer profile: ISO Coated
    How can I make sure the printer handles the colors in other CS3 apps than Ps? I tried it with ID's print dialog (translated from the German version: Color Management > Options > Color Handling: PostScript-printer decides colors).
    Thanks a lot!

    RE: "You don't indicate what Xerox printers you have"
    In my first post I named it, is that the information you need?
    Docucolor 3535 using Splash 3535
    That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
    Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

  • I imported 100 photos, when I was reading photos iphoto crushed, and when I restarted iphoto all photos imported had disappeared!Is there a way to find them. They were imported, they can not have disappeared from the hard disk?

    I imported 100 photos from my camera (Canon) into iphoto. The importation went well, and when I was watching the photos, suddenly iphoto crashed. I restarted iphoto and realized that the photos had disapered. The events are availbble into iphoto but they are empty, the photos have dispeared. I can not believe they disapeared as they have been imported and read once, they must be hidden somewhere on the disk? Is there a way to find where they are?

    Assuning you're running iPhoto 9 or later try the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
    2 - Run Option #4, Rebuild Database.
    OT

  • I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

    I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

    There are several possible causes for the Black Screen issue
    *1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    *2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    *3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    *4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    *5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Regards
    TD

  • When trying to import photos with iPhoto from photoshop.. won't let me keeps saying that the photos are already in the iPhoto library but they are not... need to fix this

    When trying to import photos with iPhoto from photoshop... won't let me keeps saying that the photos are already in the iPhoto library but they are not

    If you are using Photoshop from within iPhoto the following may help with the workflow.  However, we do need to know the answers to the questions posed by Terence and Larry to be able to help you.
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Screenshots are from PSE 10
    Note 1:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    Note 2:  editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

Maybe you are looking for

  • Can You set a Default Email Address when sending Emails

    I have multiple email accounts set up. When I compose a new message, it always uses the send address of the message that is selected in the open window. Is there anyway to set a particular address as default or better yet don't pick an address and fo

  • Can i pass the persistence unit to the Ejb before it inject the entity mana

    Hey, The user in my system can create his personal schema, so i need to work with multiple schemas. As i understand i need to create at run time persistence unit for each schema. The problem is that my DAO i inject the entity manager in the following

  • How to make drilldown free column

    Hi experts, I have 2 columns in my report ,  budget and actual .But Drill down should not effect the budget column. The value of this column should be at the top. Drill down should effect only actual column. Guide me how to achieve this. thanks, Raje

  • Fact Table in DW

    Hello Guys, I am working in Datawarehouse project. As you might all be knowing about the FACT table. Is there any tips for me for permornace boost for the same?? Is it possible to make the fact table patitioned or Cluster table? or any other way for

  • How to activate 3g iphone??

    so I got sent home to activate my new iphone as most everyone else...but how do I do this? when I plugged it up it just treats it like a new ipod...register w/ apple blah blah blah...now its ready to go but its never done anything as far as getting t