When printing grey scale on a MX882 printer, is the color ink used at all?

We set all of our home PCs to print gray scale on our printer, an MX882 (serial # ACAT48275) in order to not use so much color ink. That seemed to be working very well until the big black ink cartridge (the 226BK) emptied out. I didn't think anything of it because the small 225 BK cartridge was still full. The 225 BK is about 1/2 full now, but all of a sudden, the color inks (226C and 226M) are empty, with the 226Y 1/2 empty.
My question is, if the BIG black cartridge (226BK) empties, does it not "switch over" to the 225 BK? Or does is start "creating" black by using both magenta and cyan?
Thanks.
Mark

Hello.
If plain, letter sized paper is used, the printer should use the large black tank for grayscale printing. If specialty paper or duplex printing is used, the printer would use the dye based inks. If grayscale printing is not enabled, the printer may create 'composite' blacks by using mixtures of the color inks. This may occur when graphic or web-based printouts are performed.
The reason for the two different black ink tanks is for the different types of printing your unit is able to perform. They are not intended as backups to each other. The larger black tank is pigment based, and is primarily used for standard black text printing or output. The smaller black ink tank is dye based like the color inks, and is used for photo and graphics output.
If additional assistance is needed, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

HT4356 How do I AirPrint in black and white from my iPad so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white.

How do I AirPrint in black and white from my iPad2 wifi/3G so I do not waste the color ink unnecessarily? I never see the option to choose printing in black and white. I have an Epson Workforce 845 printer.

There is no option to force black and white ouput.
You can request the feature here:
http://www.apple.com/feedback/ipad.html

Multiple select queries used in Excel BI report ,fetching data from Sharepoint DB(SP2010_Prod_ProjectServer) causing blockage on DB ,when more than one workbook(same copy of Excel BI Report) refreshed using Refresh All option.

I am using mutiple select queries to fetch data from Project Server 2010 DB(its sharepoint DB) and these queries fetch data in Excel BI report by establishing connection with DB using instance name and all. I have enhance all these select queries and data
is being fetched in secs. but when more than one copy of same Excel BI report is refreshed using 'Refresh All' option, then these select queries cause blockage on DB.
Please let me know mitigation for this blockage issue.
Should I use begin transaction and commit transaction statements/ shared lock statements.
please reply

Hi,
run same query at the same time?

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

In Dreamweaver 6, I created a new fluid layout. I set up (4) DIVs. In the 3rd div, I changed the font color. The new color shows up on the website when viewed in my computer desktop, but, when viewed in a tablet and a cell phone, the color of the font doe

In Dreamweaver 6, I created a new fluid layout. I set up (4) DIVs. In the 3rd div, I changed the font color. The new color shows up on the website when viewed in my computer desktop, but, when viewed in a tablet and a cell phone, the color of the font does not change. It's the same in Dreamweaver's Live view. It shows the new color on Desktop view and not in the cell phone or tablet view. Also, I changed the font itself in one of the DIVs and it shows up in the new font on the desktop view and website viewed thru the computer, but, not on the tablet or cell phone. Can someone please explain. I want to be able to change the fonts and colors for viewing in the tablet and cell phone, also. The fonts were all standard fonts. Sans-erif and Verdana and Arial were tried. Thanks.

I will lock this discussion because of duplicate post.

When I insert a shape, how do I change the color without changing the texture?

When I insert a shape, how do I change the color without changing the texture?

Hi,
you are working with a percentage width of your tables, for example:
table width="123%
td width="75%"
td width="25%"
So it is simply a arithmetic problem to get the proportional wide (means the ratio of % to cm) of your images, so that they do not break the frame. Certainly you could use (translated from German DW) "properties" and change the sizes there:
Hans-G.

I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

Hey bill.rizzo2,
Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Phone number missing on iPad or iPod touch
If your phone number isn't listed on an iPod touch or iPad, follow these steps:
1. Update to the latest version of iOS.
2. Verify that you're using the same Apple ID that you're using on your iPhone.
3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
    - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
4. Sign in to your Apple ID with FaceTime and iMessage.
If your phone number still isn't listed, follow these steps:
1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
    - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
2. Sign in to your Apple ID on your iPhone.
3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
4. Sign in to your Apple ID on your other iOS devices.
Thanks,
Matt M.

When i start I tunes i get this message , The registry settings used by Itunes drivers for importing and burning CD'S and DVD's are missing

when i start I tunes i get this message , The registry settings used by Itunes drivers for importing and burning CD'S and DVD's are missing please reinstall..ive reinstalled 5 times ,all 5 clean installs ...still dont work with Iphone 3 ..

Same problem as me. No answers though. Also I can't access the itunes store. There is something missing in the registry but what? Seeing as your post was sometime ago it looks like there is no help.

When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich/

When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich?

The reason your applications do not work in Lion/Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006. When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
So you do not have to accept recriminations from others for previously using Rosetta without even knowing it was present and running!
So for those of use that need to upgrade to Lion/Mountain Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
[click on images to enlarge]
And now Mountain Lion:
If you are unable or unwilling to update your inventory of PowerPC software, this solution offers you an alternative for not more than the $29 cost of Snow Leopard and $79 cost of Parallels (cheaper via internet sources).
Full Snow Leopard installation instructions into Parallels 7 are here:
http://forums.macrumors.com/showthread.php?t=1365439
Assistance with the installation process is available on this linked forum.

Stop it from using photo black ink for black text printing and where has the color ink gone?

My HP Photosmart Prem C310 series all in one is using the Black Photo ink cartridge for text printing instead of the XL Black that I put in it for text printing. How can I get it to use the right cartridge for printing? Also, even though I have NOT printed ANY photo's and very few pages of text the new set of color cartridges I put in it a few months ago are almost empty. Why? How could they be almost empty when I have NOT printed anything in color? This is getting ridiculous replacing ink cartridges every few months WHEN I HAVE NOT BEEN PRINTING ANYTHING!!!
The set of ink cartridges that came with it lasted for several months. Since then I've gone through two sets in less than a year. That's 3 sets of ink cartridges when I have only printed 3 photo's when I first set it up. And have only used les than a 1/4 of one package of printing paper. I've only put paper in it twice. Each time it was about a 1/4 inch or 3/8 of an inch thick stack of paper in the tray. I've even tried shutting the printer down when its not being used for a long period of time but the ink is still disapearing. Where is it going? Why is it going there? How do I stop it? This is rediculous. I may as well junk the thing even though it still works because I cant aford to keep feeding it ink when its just sitting there doing nothing most of the time.
Thank you
This question was solved.
View Solution.

I just got another email from HP about this problem wanting to know what I found for a solution to this problem. From all of the suggestions from the HP tec support all of them pretty much kept saying the same thing. That it is my fault that it's using so much ink because I have it on the wrong settings. One tec did slip and say that it doesn't matter what settings you have it on it will always use the Photo Black cartridge for printing plain black text and it doesn't matter if you have a X-Large Black cartridge in it for text printing because it was made to always use the Photo Black for text and even use some of the colors to blend with the black to make it stand out. Why anybody would need this when just printing shipping labels and things like that I don't know.
Any who, The only solution for this problem is,,,, junk the printer and get a different brand & model of printer. Research it before buying to find out how much ink it wants to waste and if it will still print black text if it only has a black cartridge in it. I was going to get rid of mine by giving it to a friend since they don't have a printer. But since I want to keep him as a friend I decided not to give it to him. Since it cant be traded in for a different one even though it still works, Its going to the target shooting range the next time I go out shooting. Maybe I'll take a few video's clips of it getting blasted to pieces with a Ruger 10-22 .22 cal. rifle with 25 shot clips, a Ruger Mini-14 Ranch Rifle shooting .223 cal with a 30 shot clip, a Chinese SKS 7.62 with a 30 shot clip. And maybe use my Ruger P89 9mm pistol and put a couple 15 round clips of 9mm in it. If there's anything left I'll finish it off with a few 3" magnum loads of #2 steel shot with my 20 gauge shotgun. Then I think I'll do the same thing to my Westinghouse 46" flat screen HDTV that just died.
Then maybe I'll come back and post the video's of my "solution to this printers problem". It may not fix the problem, but it will be an entertaining way of getting rid of the problem.

When i open safari, it will not load and the color wheel spins

When i open up safari, it will not load anything and the color wheel spins as long as safari is open. Not sure what to do.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

When copied to CD and taken to Local lab the color is awful

When I export files to CD and take to local lab to print images come out muddy and Dark. Why and how do I calibrate the monitor? I have gone through the calibration menu in System preferences. I have never had this issue from my pc.
Help me!

I have gone through the calibration menu in System preferences
Did you change the gamma to the PC 2.2 in the process? That makes the screen darker so that you can adjust the brightness to your liking before exporting. That can help somewhat. Also the color profile that is being used might have an effect. I've gone thru and set everything possible to the sRGB color profile as that seems to be the standard for printing and internet use.

Can anyone tell me why a picture would change color when I try to download/upload it? It is the exact same picture- chosen the same way and when it goes to any other program it changes the color (I've tried canvas on demand and mpixpro. I've also tried

Can anyone tell me why this picture changes color when I try to download/upload it? It is the exact same picture I have taken from the same location. The image on the left is via preview and the image on the right is what is shows like when I try to download it. I have emailed it to myself and it shows fine on the computer and in CS4, but when I look at the download via my phone or on another computer it shows the wonky color on the right. I have checked the color space shows RGB/8 bit. Any ideas why or how to fix it? It isn't with any one specific session.... and I've tried it on both my desktop and my laptop- saved image to an external hard drive and to drop box. I've tried sending the image to canvas on demand, my email, mpxipro, POST editing- all the same result. Please HELP!! What am I doing wrong?

Most of the time you see something like that. The image in question has a color profile other then sRGB. Some image viewers/displayers are color managed and others are not. So the image do not look the same in all of the applications you use. So colors seem to change.
Try converting it to sRGB color and see if then looks the same all around. Also I think PC and Mac displays are set to different gamma something like 1.8 and 2.2
Though I'm colorblind I even see color variations.

When i click on itunes to open, message says: the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes. I'm inexperienced. Please help

When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie

Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

When printing grey scale on a MX882 printer, is the color ink used at all?

Similar Messages

Maybe you are looking for