When recording how do you make an acoustic guitar sound good??

With the microphone on my mac, im recording my guitar and i mostly hear the strumming and no sound is there an editing thing i can use to get rid of ugliness??

Oh, in terms of creating music, it's actually pretty bad, even for voice.
The built in mic is good for "text only", like chats, dictaphone like usage, quick&dirty recordings... But if you want to record music (not just noise), a decent microphone is the first thing you'll need. You'll also need an audio interface with a XLR input (preferabely with phantom power in case you got a condenser mic).
Recommendations for beginners: Shure SM-57 or -58 (good-for-all dynamic mic, but needs good preamps). Or AKG C1000S as a universal condenser mic.
Now the choice depends on which kind of music you like to record. For acoustic guitar, i said it should be a condenser. It's more crisp and clear as most of the dynamic microphones. I like the AKG C1000S because it is not as small and fragile as many of these intrument mics. You can use it for vocals, change the cardioid characteristics, record ambient sound and speeches, whatever.
The Shure SM-57/58 is the main workhorse in many environments. Whenever there's no better mic, no special mic for this or that, the engineer will look over his shoulder and tell ol' John Doe to "Gimmea57". Or 58 for vocals, because it has an integrated pop filter. You'll see many vocalists using the '58.
And to give you something to read: http://www.tweakheadz.com/guide.htm
Fox

Similar Messages

  • What are the best Garageband effects to make an acoustic guitar sound like a twangy Fender?

    What are the best Garageband effects to make an acoustic guitar sound like a twangy Fender?   Using a Blue Snowball USB mic for input.

    If you are willing to spend the money you might look elsewhere for better samples,
    http://www.native-instruments.com/index.php?id=akoustikpiano

  • How do you make your xaml ui look good without being a designer?

    Hi all,
    I am realy stuggeling to make ui's for my softwares to give my users a nice visual experience.
    I started to learn c# and winforms some years ago and i have huge problems to make the switch to xaml.
    Now i pretty much use the pre made templates in visual studio such as the Hub App and i do small modifications.
    How do you non designers handle your ui without hiring a designer?
    Are there any place where you can buy cheap pre made ui templates i can use as a starting point?
    I also followed the course design your ux in blend but i can't say i got the hang of it with just one course.
    Are there more courses or tutorials anyone can recomend me about making ui's in blend?
    Are there any other easier tools to make nice looking xaml ui beside blend? Maybe something not as advanced as blend and more visual drag and drop?
    Any tips,tutorials,courses,websites or any other thing that you used when learning to make a nice xaml ui are more than welcome.

    Hi all,
    I am realy stuggeling to make ui's for my softwares to give my users a nice visual experience.
    I started to learn c# and winforms some years ago and i have huge problems to make the switch to xaml.
    Now i pretty much use the pre made templates in visual studio such as the Hub App and i do small modifications.
    How do you non designers handle your ui without hiring a designer?
    Are there any place where you can buy cheap pre made ui templates i can use as a starting point?
    I also followed the course design your ux in blend but i can't say i got the hang of it with just one course.
    Are there more courses or tutorials anyone can recomend me about making ui's in blend?
    Are there any other easier tools to make nice looking xaml ui beside blend? Maybe something not as advanced as blend and more visual drag and drop?
    Any tips,tutorials,courses,websites or any other thing that you used when learning to make a nice xaml ui are more than welcome.

  • How do you make it so that the ipod will play all the different artists featured in an album when you click that album to play?

    How do you make it so that the ipod will play all the different artists featured in an album when you click that album to play? At the moment, each artist in the album is being separated and I can't play them together. For example, to play the Halo 2 Soundtrack, Hoobastank, Breaking Benjamin, Nile Rodgers, etc. are some of the artists featured. However, in the Albums category, they are each separate choices. I want to play them all together, but can't. Is there a way to do that?

    It sounds like the album metadata is incorrect, or differs from song to song in iTunes.  Albums with various artists will play properly assuming all the songs are tagged with the same identical album name, as well as the track number.  For the Halo 2 Soundtrack, metadata should look like this:
    Song: <Song Title>
    Artist: <Song Artist>
    Album: Halo 2, Vol. 1 (Original Soundtrack)
    Genre: Soundtrack
    I had a similar problem with my imported Cowboy Bebop albums and the mixture of artists/album names.  Once I adjusted the metadata, all of them play in the correct order just by selecting the Album from the available list or in Coverflow.

  • TS2755 Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear?  How do you make the old deleted ones a

    Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear?  How do you make the old deleted ones appear?

    only way is to restore the phone as new.  OR wait until IOS 7 comes out in the fall.

  • How do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

    how do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

    You didn't say which model of iPod Nano that you have, but generally there should be a lock setting, that can be turned on or off, to prevent accidental changes in settings. And, there is also a setting to turn on or off a feature called, "Shake to Shuffle." It allows you to change songs by just shaking the iPod.

  • On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work?

    On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work? I had a 4s and didn't have these issues

    Thank you, I did find that. Still my phone does not always vibrate when ringer is off for texts and calls, only sometimes?

  • How do you make one long track into multiple tracks?

    How do you make one long track in itunes into multiple tracks? Is there a way to do that?

    I found another solution too through Garageband. I don't know if it was easier, but I liked this way of creating seperate tracks.
    First, You put the long track into Garageband.
    -then you create a New Basic Track under Track Tab-create as many of those as tracks you want to make
    -also make sure the headphones button is lit up under each New Basic Track-this allows it to be a 'solo' track.
    -then you can start cutting music-with the long strip find where you want to split into a new track and drag that half down into each New Basic Track.
    -Once you are done, press Option Z and a purple little triangle will appear up by the measures. drag the triangle to the end of the first track-this allows it when sharing to itunes to just record the particular track you want, it puts a stop/end to that track.
    -then, make sure the track you want to share is highlighted the bright orange and go to share, 'send to itunes'
    -it will send that to itunes and you can rename it in itunes.
    -Go back to Garageband-delete the first track you successfully shared and move the next one up to where that one was. Slide it accross to the left so it is at the beginning, press option Z and move the purple triangle where you want it to be...and you are good to repeat until all your tracks are done!
    I am a very visual person, and this helped to see where I was cutting each track, just another way!

  • How do you make superscripts and mathematics in Preview's text annotation?

    When adding text annotations that include scientific notations, how do you make superscripts, e.g. "3.2 × 10^{-23}"?
    Searching Help for 'superscript' turns up nothing, suggesting the command does not exist, as it does under Baseline etc. in iWork. Please tell me this is not the case! If it is, has the situation been improved in the new operating system?
    A related issue: I wish to include other mathematics -- is there a way to include mathematics similar to LaTeX? Might Preview incorporate using latex code in the future, so I can easily type "\exp{-\lambda t}" etc and have the math appear?
    I'm adding text annotations to PDF lecture notes in Preview, basically filling in blanks the instructor has left so students will pay attention in class, and these annotations include superscripts; I wish to format properly.
    Thank you!

    Once you have the circle shape displayed, long press on the border of the circle. Once it is highlighted, drag horizontally or vertically. This should allow you to distort the circle into an ellipse (or the square into a rectangle).
    Hope that helps,
    Frank
    Sketch Engineering

  • How do you make a MacBook Pro talk to an Epson printer?

    MacBook Pro
    OS X 10.6.8
    (Thinking about getting  another MacBook)
    I had an Epson Artisan printer, got an Epson Workforce WF-3640 new in Jan, hardly used because I cannot make it do what I want it to do. Wireless connection is good.
    With the MacBook Pro, the interface with the Epson printers is not what it used to be on the G4: no ColorSync, no 2-sided, no thick paper, none of those kinds of instructions appear on the generic printer control panel. Which by the way, bears NO resemblance to the Epson manual screenshots, and the instructions in the Epson manual are useless.
    How do you make a MacBook Pro talk to an Epson printer? And by the way, I cannot use the scanner either. I have to set up a document to print, then when the printing progress box appears, click on the scanner icon.
    Also
    Printer has 2 compartments. Top compartment #1 for all types paper.
    Bottom compartment #2 for plain paper only.
    I load glossy photo paper in #1, it prints plain paper from #2 even though I entered instructions on the control panel on the printer.

    If you haven't done so already, try resetting the printing system.
    Reset Printing System

  • How do you make "Acrobat X Pro" open the "combine pdf" window in the foreground?

    How do you make "Acrobat X Pro" open the "combine pdf" window in the foreground?
    I am using a "Windows 7" computer at work with "Acrobat X Pro" and I'm constantly combining
    pdf's and tiff's in Acrobat.
    It would be nice if when I select 30 or 40 files to combine, the
    "Combine Supported Files in Acrobat" window would open in the
    foreground, not behind the 10 or so windows already open.
    I have been researching this for some time now with no solution.
    If the answer is that "IT CAN'T BE DONE", then that's fine. At least
    I will have an answer and can stop searching. If (as I suspect) it can
    be done, then kindly supply me with "step by step" instructions.
    Michael Jones

    Something that works  (provides Acrobat the application precedence in the OS that is requisite for this) --
    Minimize the 10 or so application windows before engaging use of Acrobat's "combine".
    That'll let the Acrobat dialog windows display front and center.
    Be well...

  • How do you make adobe X open the "combine pdf" window in the foreground?

    This may not be the correct forum for this question, but considering that I simply
    have not been able to get a reply in any other Adobe forum, I decided
    to just post this question to ALL Adobe forums until I get a response.........
    How do you make adobe X open the "combine pdf" window in the foreground?
    I am using a "Windows 7" computer at work with "Acrobat X Pro" and I'm constantly combining
    pdf's and tiff's in Acrobat.
    It would be nice if when I select 30 or 40 files to combine, the *******
    "Combine Supported Files in Adobe Acrobat" window would open in the
    foreground, not behind the 10 or so windows already open.
    I have been researching this for some time now with no solution.
    If the answer is that "IT CAN'T BE DONE", then that's fine. At least
    I will have an answer and can stop searching. If (as I suspect) it can
    be done, then kindly supply me with "step by step" instructions.
    Michael Jones

    Hi ,
    I guess that was a bug in that version .
    It does not happen in Acrobat XI and Acrobat DC .The window comes right in front of everything else .
    I wonder that was a bug and that was fixed the other versions.
    You could upgrade to the latest Acrobat version ,i.e Acrobat DC and you would not experience this anymore .
    Regards
    Sukrit Dhingra

  • In windows 8 how do you make the bookmarks column "flexible"? I used to be able to make it narrower.

    Windows 8 how do you make the bookmarks column "flexible"?

    Is the problem with the Bookmarks Sidebar -- the one you can open and close by pressing Ctrl+b? It does seem to have a minimum width and won't get narrower than that, but I'm not sure whether you are running into that limitation or whether for some reason you are not getting the resizing arrow when you mouse over the thin border between the sidebar and the page.

  • How do you make Mozilla listen to users and stop FFFFirefox Auto Updating despite being set to NOT auto update?

    I am spitting nails
    After all the STUPID problems outlined here
    https://support.mozilla.org/en-US/questions/999831?esab=a&s=&r=0&as=s
    I set Firefox to stop auto updating,
    Then the other day I installed a new user on my laptop, when they loaded Firefox it auto updated MY version of Firefox.
    Has NOTHING been learnt?
    STUPID STUPID STUPID STUPID STUPID
    So I have 2 questions
    How do you make Mozilla listen to users?
    and how do prevent what happened to me happening again?

    SuperSluether
    Not a millionth, you have only provided 150 answers and I doubt they were all this issue.
    If you don't like it, don't use it.
    If a business took this attitude they would soon be out of business
    Updates help KEEP YOU SAFE
    Sometimes, but in my experience FFirefox updates can really screw up your system, lose you data, mess up your user interface. I have run IT for one of the biggest intranets on the planet and we never allowed even Mictosoft updates until we did User Acceptance Testing and understood the impact of the upgrade. I am a grown up not a child, I have system where I test updates for performance, security and impact, I WILL DECIDE when I want to install it. If Mozilla wants to provide real security updates I would take them but if you look at the link in my OP you will see it said an update was security and it completely messed up.
    Updates add tons of great new features
    Actually with FFirefox in my experience they take more away than they add, things I did not ask them to take, they do not look at my config and leave my settings as they were and then tell me about new options, no they completely screw my productivity as it takes days to figure out how to undo the kwap they have added. Copying the AWFUL Chrome interface is not an improvement, Google has one of the worst UI's on the planet accross all their products.
    Firefox is designed to be customized PER USER, NOT CROSS-SYSTEM
    There are some things that benefit from being per user and some that are per machine, windows has group policies per machine and per user. My OP is telling Mozilla that this is another area where they have "designed" badly, I tell them this so that they improve it and in the vain hope that there is some config setting that will stop this nonsense.
    So SuperSluether you have not really helped, all you seem to say is FO if you do not like it. Good job you do not run a business. With that attitude probably best you do not contribute.

  • How do you make imessage work? The icon is there. You can type in the recipient but are not allowed to hit the send button

    How do you make imessage work? We upgraded to verision5. The icon is there. You can type the message but the send button is not available.

    There is some instability in  iMessage.  It is a versatile and confusing app even though there are so few options in its use. 
    I had issues trying to get iMessage work on both my iPads and my iPhone. 
    ON the iPhone, turning off WiFi service and then trying iMessage fixed the problem.
    On the iPad 2, same thing.  Turning off WiFi service fixed it.
    On the iPad 1, I took a suggestion from zoomzoom and changed the WiFi network configuration on the iPad to use 8.8.8.8 as a DNS server and then use iMessage.  That fixed it.   Now I put the DNS back to default and it still works.
    I suspect the iPod Touch will have the same fix as the iPad.
    If you have a WiFi and 3G iPad or iPhone, try turing off WiFi and see if that fixes it. 
    Why?  (beware, some of this is guesswork)
    iMessage can talk SMS to cellphones and smartphones (that are using the cell-network).  It can also talk Apple iMessage format to iPhones and iPads whether they are on cell-network or on WiFi.  If you are talking to an SMS cellphone, iMessage figures that out and blindly sends your message.  If you are talking to a iOS5 device, iMessage figures that out too, checks to see that they are on-line, and then does something different if they are or are not on-line.  If you type in an email address, and not a phone number, I think iMessage attempts to see if the email address is registered with Apple (or iCloud or whatever) and if it is not, it does something to let you know, possibly by making the Send button not light up. 
    In order to register iMessage and an email, you have to let the iOS device see whatever service it is that iMessage uses.  That is where the problem happenes.  zoomzoom suggested manually setting the WiFi DNS to google's 8.8.8.8 IP address, then run IMessage, and that seemed to fix the problem.  Setting the iOS device to use 3G-only (by turning off WiFi) also fixed the problem.  I suspect going down to StarBucks or McDonalds and using their WiFi would also fix the problem.  Once the problem is fixed, it doesn't seem to come back so I can't test these 'fixes'. 
    To change the DNS on your iPad find your WiFi networks configuration, click on the blue arrow, touch DNS, backspace over the number that is shown, type in 8.8.8.8    Then click on the WiFiNetworks button at the top of the screen.  Now go run iMessage.  After that, you can delete the DNS entry again and leave it blank.  Your iPad will fill it in from the WiFi router when it needs it.

Maybe you are looking for

  • Need to/How to DEACTIVATE Win 7 from Bootcamp of previous Mac?

    Hello all, Planning to get a new MacBook air and planning to install previously owned Windows 7 on this new Mac. The Windows 7 is installed on my current (old) MBA which I plan to trade-in. Question: Do I need to "de-activare" Windows 7? How? Thanks

  • Connecting to MySql Database via a JDialog

    Hello, I have a JDialog Box that connects the user to a database, the username is taken through a JTextField and passwork through JPassword field the problem is that the password isn't evaluated rightly........... and hence the application ends in an

  • Books Related To LabVIEW

    I am a beginner to Labview field. Which book is best suited for Learning Labview programming (Mainly about activex, data socket daq configuration etc)

  • 1 Graph from two queries

    Hi Guys, I have the following requirement : Query1 : Incidents open this  month Query 2:Incidents close this  month For the above queries i need to create a Webtemplate :  2 tables from 2 queries  + 1 Graph from two queries. Is it possible to get a s

  • Transient VO and UIX checkBox tag

    I have created a VO that uses several attributes from an EO. In addition, it contains several transient attributes. The transient attributes work fine when editing with the textInput tag - the values are stored and displayed as expected. However, I c