When releasing PO error occured Express Document " Update Terminated"
hi all
i am getting a strange problem ,
while doing release of PO(purchase order) by t.code ME29N, i am able to release and SAVE it properly with out any error.
But when returning back to ME22N t.code to see that PO .
i am getting this error :
Note : - this error is coming for a particular TYPE of PO's and with
in that TYPE all PO are not giving ERROR,
Please tell me what can be reason,
Express Document "Update Terminated"
Runtime Error POSTING_ILLEGAL_STATEMENT
Occurred on 15.07.2008 at 11:03:24
Statement "CALL DIALOG" is not allowed in this form.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSTXW " had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Information on where terminated
The termination occurred in the ABAP program "SAPLSTXW " in "DISPLAY_OTF".
The main program was "RSM13000 ".
The termination occurred in line 82 of the source code of the (Include)
program "LSTXWU02 "
of the source code of program "LSTXWU02 " (when calling the editor 820).
The program "SAPLSTXW " was started in the update system.
000710
000720 if ( sy-binpt = false and
000730 ( ( cl_gui_object=>www_active = true or
000740 itcpp-tdscreen = 'ITS' ) or
000750 ( cl_gui_object=>javabean = true and
000760 itcpp-tdscabap = false ) ) ).
000770
000780 perform cc_display_pdf.
000790
000800 else.
000810
> call dialog 'DISPLAY_OTF' "ABAP-List-Preview
000830 exporting otf itcpp 0
000840 importing itcpp.
000850
000860 endif.
shall i concern this with BASIS person , coz every PO not having this problem,
i think it is related to time taken by SERVER for UPDATE is more then this error comes .
OR is there any technical issue related to ABAP.
regards
sachin
This problem will be caused by an output which will be triggered when releasing the PO. Check the messages in the PO for which one is causing the update error.
Regards,
John.
Similar Messages
-
Hello friends,
Am an abaper (fresher).
Actually i wanted spool to be generated when my delivery document is saved in transaction VL02n.
But when i save it and come out , am getting an error telling "Express document: Update terminated."
When i issue output to the delivery type am getting no response. But the status of the output type inside the document is processed (Green)
I have pasted below the SM13 error log.
Module Name Type Update Return Code
1 RV_DELIVERIES_SAVE V1 (no retry) Error
When i further look into it i get this error looking in ST22 it shows as mentioned below
00 671: ABAP/4 processor: CONNE_IMPORT_WRONG_COMP_TYPE
( My print program has no syntax errors. I have passed the control parameters for preparing my smartform for spool to be generated when i save the delivery document. )
Could you please help me in solving this issue ?
Thanks and Regards
KausthubHi Kausthub,
although the print programs has no errors, it is possible that the output itself causes an update error. I remember when I created a sapscript form I forgot to define firstpage as follow-up-page of firstpage. Whenever more than one page was created, I got a dump in update processing - like you got it now.
On the other hand, CONNE_IMPORT_WRONG_COMP_TYPE should not be related to this - there are some SAP notes applicable.
Regards,
Clemens -
Error Msg: Express Document 'Update was Terminated' in VF02 t-code
Hi all,
When I click on save in VF02 transaction I am getting message that ' Express Document 'Update was Terminated' received from author 'XYZ'.
After saving when I am seeing in header -output the output type not appearing.
Please Help me Its an urgent requirement.
Regards,
vinodHi Vinod,
there is two reasons
1) Number range is not specied limit define billing document number range.
path- img sd- billing -define number range and see diffenettly i hope your problam willbe solved.
2) t.code NACE whether you have maintained the condition record or not check other wise please maintain it.
i hope you have understood
if your problam is solved don't forget to reward.
thanks& regards
surya -
Express Document "Update terminated by Author: user name"
Hi All
Can anyone help me with regard to this issue? When user do Purchase return, they get this message. I read al the message related to it.
But I dont get proper solution. All relate to code and Number Range. But I am not clear of what to do?
I get the following message:
*Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Date and Time 08.06.2011 08:54:36*
Short text*
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?*
Error in the ABAP Application Program
The current ABAP program "SAPLWB2D" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?*
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis*
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not c
in
procedure "WBHF_SICHERN" "(FORM)", nor was it propagated by a RAISING cl
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
System environment
SAP-Release 701
Application server... "SVTERP03"
Network address...... "172.31.254.7"
Operating system..... "Windows NT"
Release.............. "6.0"
Hardware type........ "16x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 37
Shortdump setting.... "full"
Database server... "SVTERP11"
Database type..... "ORACLE"
Database name..... "GEP"
Database user ID.. "SAPSR3"
Terminal.......... "4PYZ32S"
Char.set.... "C"
SAP kernel....... 701
created (date)... "Jan 28 2010 20:07:00"
create on........ "NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00"
Database version. "OCI_10201_SHARE (10.2.0.4.0) "
Patch level. 69
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0, Windows NT 6.1"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 0
MM Used. 1247408
MM Free. 2939808
User and Transaction
Client.............. 500
User................ "NAS00602"
Language key........ "E"
Transaction......... "WB22 "
Transactions ID..... "D86991E000EAF1F6A067000087526684"
Program............. "SAPLWB2D"
Screen.............. "RSM13000 3000"
Screen line......... 2
Information on where terminated
Termination occurred in the ABAP program "SAPLWB2D" - in "WBHF_SICHERN".
The main program was "RSM13000 ".
In the source code you have the termination point in line 374
of the (Include) program "LWB2DF0W".
The program "SAPLWB2D" was started in the update system.
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred
procedure "WBHF_SICHERN" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLWB2D "; its source code begins in line
357 of the (Include program "LWB2DF0W ".Hi,
Your program is trying to insert entry having primary key which is already exist in the database table.
Please checkout the number range for PO return, if you are trying to return PO with same SAP document Number.
While you return the PO one unique No. gets generated through Number range, these number having conflict while inserting the entry in the database as the primary key may have already been exist in the DB table so same can not be inserted again and you are trying to insert the same.
Now the only option available is either to change the numbner rabge for PO return object or delete the entry from the DB table, however same is not advisable so bater to change/create number range for PO return.
Below is the procedure to do the same for your reference, hope it will help you.
[Return PO;
There are many more related threads which will give you the idea to change the number range, also you can ask your MM consultant to guide on the same.
Regards,
Umang Mehta -
Earmarked funds - Express document "Update was terminated" error
Hi,
When i create a contract(RECN), a earmarked funds document getting created and it updates the table KBLK with single primary key BELNR.
I see in the Tcode OK60, the number range assinged is '05' - 0200000000 to 0299999999.
KBLK table has entries created from 0200000000 to 0299994311 which were created earlier.
From this financial year, when i am creating a contract, the new BELNR is started again from 0200000000 series, hence it throws an error message "Express document "Update was terminated" since entries are already exist in the KBLK table.
Finally i understand we have to change number range assignment.
Where can i do this? Please help if my understanding is wrong, how can i rectify this issue.
Thanks,
Bharath.Hi,
U can change the number range for the contract for this fical year and make it start from 0299994312 to 0299999999.
But it seems u have already used most of the numbers, so go for a new number range for both the documents.
Hope this helps
Deepak -
Error:express document "Update was terminated" received from author
Hi All,
I m creating shipment frm the transaction VL01.
While creating the shimpment i am assigning one Z output type and clicking on the planning phase on the shipment.
After that i am saving my shipment.
At this point of time my shimpmnet is created but after this(after saving the shimpment) if i am trying to do anything it is giving me the below error.
Express document "Update was terminated" received from author "Sachin Yadav".
Kindly help why i m gettng this error. How to remove this error.
Regards
SachinSAP is telling you that the transaction failed and a rollback has been executed, due to some catastrophic error in the system. These often arise from errors in exit coding....check ST22 to see if you can find anything...there may be a clue there....otherwise start looking at the changes you just made for the source of the error.
This error occurs, most likely, because during the actual save to database operation, or because of something in follow-on processing launched during the save step (like a new background task for form output or something like that) an fatal error is occurring and SAP is detecting that and rolling back the body of work that was just committed to the database. -
Express document update error in me21n
Hai
Iam working on 000 client, Iam not able to see my PO in the list.
The error is "document update terminated by the user"
In SM13 ,i have checked the error log and it is showing the cause as
Module name -
>me_create_document
Type----->V1
Status----->Error
Please help me in resolving this error.
Regards
AnuHi Anushka..
Did u find the solution for this error ?(Express document update error in me21n) .. while creating PO.
I am having the same issue now.. need ur support @ the earliest.
Thanks in advance. -
Express document "Update was terminated" recev from auth While BAPI change
Hi.
Iam trring to change sales order which is exist in the system provided to insert a new item
for a existing sales oder and pass values to header and update flag as 'U'
and item details and flags for corresponding items.once it throws an error as
"Express document "Update was terminated" recev from auth "
while iam executing bapi_salesorder_change once control goes to the
Bapi_transaction_commit it throws Error .
may i know what is problem and how pass values to BAPI_SALESORDER_CHANGE
Why that kind of errors occur oftenly.
Thanks & Regards
sivakumar kasaThanks Mr.JP
Error analysis:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "SD_PARTNER_UPDATE" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
when i comment partner details it works but
Iam not getting quantity and partner details so how to pass Partner Details and item quantity
to updated existing line item number.
Thanks & Regards
sivakumar kasa -
Express document update was terminated in mm02
Dear experts:
when i use MM02 to change the material master,after saving,i get the error message'Express document update was terminated'.
The ID has working period of time and the authority is enough to do this,pls give some advice.
Thank you very much!Hi Stephen,
This error message comes when ur transaction doesn't get the proper system resources or when the load on the server is too much. Becuase of which tables dont get update and u get the error .
basically it is performance issue of the system. U can try after some time if proble persists u can contact ur BASIS team.
Regards,
AM -
Getting "Express Document Update was terminated" while creating BP..
HI All
I am creating Business Partner using HR Pernr using following BAPI's.
1. BUPA_CREATE_FROM_DATA - To create BP.
2. BUPA_ADDRESS_ADD - To create address..
3. BUPA_ROLE_ADD_2 - To create role.
4. BUPR_RELATIONSHIP_CREATE - To create relationship.
5. BUPA_BANKDETAIL_ADD - To create acounts.
6. BUPA_STATUS_ADD - To create status.
BP is creating fine...along with I am getting the Error like "Express Document update was terminated received from author ......" . Error descriptin looks like below.
Error Info... CD 328: DUPREC:POS&BUPA_ADR&DP00243572.
I have verified in SM13 T code...It is showing in BUPA_ADR_WRITE_DOCUMENT.
Please suggest me how we can resolve this issue...
Thanks in advance..
RamaHi Rama Krishna,
This can also happen when your number ranges are incorrectly defined.
Try checking number range assignment for BP and check in table if number already exist.
We faced similar problem when migrated data from prod server and someone change the number ranges for PO.
Regards,
Mohaiyuddin -
Express document "Update was terminated" on saving vendor payment F-48
TCODE F-48.
When we are going to pay full payment to party it works fine
Problem:
When we do partiall payment for example
100 kg material Price $100
first time: we purchase 50kg of $50 and create GRN
After this when we decide to pay the remaing payment of the material then system give the error .
Express document "Update was terminated" . This error appears when we select all the Taxes line simultaneously.
System not show this error when select one tax line and post the document but this is not acceptable because multiple invoice will create for lone documnet.
Looking forward to your replies.Hi Atif,
Thanks for your quick reply. following are the error details
FUNCTION MODULE: POST_DOCUMENT
STATUS : UPDATE WAS TERMINATED
REPORT : LF005S01
ROW : 293
ERROR DETAILS :CLASS F1 NUMBER:109
F1 109: Line item 005
WHEN I CLICK ABAP EDITOR IT TAKES ME LAST LINE OF THE FOLLWONG CODE
FORM BSEG_INSERT.
INSERT BSEG.
IF SY-SUBRC NE 0.
MESSAGE A109 WITH BSEG-BUZEI BSEG-BUKRS BSEG-BELNR BSEG-GJAHR.
ENDIF.
ENDFORM. <----
CURSOR BLINKING ON THIS LINE -
Express document "Update was terminated" received from author " "in VA21
Dear SAP Experts,
i just set up Output determination for quotation type. and created VA21, while coming out i am getting error
as Express document "Update was terminated" received from author "
below is the dump i am getting. Could you please help me to solve this?.
Update was terminated
Created m8050032 on 06.01.2010 13:04:43
Update was terminated
System ID.... E6I
Client....... 800
User..... M8050032
Transaction.. VA21
Update key... DD95FADEFC90F19591EF001D0915C7EC
Generated.... 06.01.2010, 13:04:42
Completed.... 06.01.2010, 13:04:43
Error Info... 00 671: ABAP/4 processor: SYNTAX_ERRORHi,
Goto T.code ST22 - ABAP runtime error
click today button,
check for the error and double click to get the detailed long text
see "How to correct the error"
take a help of ABAPer
Regards
senya -
MRKO Error : Express document "update was terminated" received from author
Hi Gurus,
When settling Consignment through MRKO we are getting error 'Express document "update was terminated" received from author xxxx' in ECD system.
At workplace inbox, the error shows "Error Info... XS 007: Address invalid".
Please note that I am not getting any short dump at ST22 for the same error.
My queries are:
1. How can I create a short dump for this error....this will help in analyzing the issue.
2. What are the probable reasons for this error can be.
Thanks in advance for helping.
Regards,
MCHi,
I have tried SM13 and getting ERROR XS007(Address Invalid).
Diagnosis says:
The address specified is invalid or initial (address value, address type INT).
Procedure:
Enter a correct address that is suitable for address type INT.
The formats are:
1. INT (Internet Mail Address): <name>@<domain> or comment<name>@<domain> or <name>@<domain>(comment)
2. FAX(fax addresses): <country><number>
ETC
Now as already told, I have properly maintained mail-id in "Email" field & "StandardComm.Mtd" field as E-Mail of the Vendor Master.
The mail ID is my official ID and working.
Please advice further.
Regards,
MC. -
SmartForm error: Express document "update was terminated" received from aut
Hi friends
we requirement to send PO smartform through Print out as well as through mail.
after creating PO i am getting popup box saying that :
" Express document "update was terminated" received from author "XXXX".
Please help me.
my code as follows:
IF sy-subrc = 0.
CLEAR g_outop.
SELECT SINGLE ldest dimme FROM nach INTO (g_outop-tddest,
g_outop-tdimmed) WHERE knumh EQ knumh.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'YNZ_PO'
IMPORTING
fm_name = sf_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION sf_name
EXPORTING
output_options = g_outop
user_settings = 'X'
wa_ynz_po_head = wa_ynz_po_head
control_parameters = w_ctrlop
IMPORTING
job_output_info = w_return
TABLES
t_ynz_po_item = t_ynz_po_item
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
for mail
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'YNZ_PO'
IMPORTING
fm_name = sf_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
CLEAR g_outop. " Commented by sharma
g_outop-tddest = nast-ldest.
g_outop-tdimmed = nast-dimme.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION sf_name
EXPORTING
output_options = w_compop
user_settings = 'X'
wa_ynz_po_head = wa_ynz_po_head
control_parameters = w_ctrlop
IMPORTING
job_output_info = w_return
TABLES
t_ynz_po_item = t_ynz_po_item
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Convert PDF from 132 to 255.
LOOP AT i_tline.
Replacing space by ~
TRANSLATE i_tline USING ' ~'.
CONCATENATE w_buffer i_tline INTO w_buffer.
ENDLOOP.
Replacing ~ by space
TRANSLATE w_buffer USING '~ '.
DO.
i_record = w_buffer.
Appending 255 characters as a record
APPEND i_record.
SHIFT w_buffer LEFT BY 255 PLACES.
IF w_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
REFRESH: i_reclist,
i_objtxt,
i_objbin,
i_objpack.
CLEAR w_objhead.
Object with PDF.
i_objbin[] = i_record[].
DESCRIBE TABLE i_objbin LINES v_lines_bin.
Object with main text of the mail.
i_objtxt = 'Find attached the output of the smart form.'.
APPEND i_objtxt.
i_objtxt = 'Regards,'.
APPEND i_objtxt.
i_objtxt = 'Narasimha'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
Document information.
w_doc_chng-obj_name = 'Smartform'.
w_doc_chng-expiry_dat = sy-datum + 10.
w_doc_chng-obj_descr = 'Smart form output'.
w_doc_chng-sensitivty = 'F'. "Functional object
w_doc_chng-doc_size = v_lines_txt * 255.
Pack to main body as RAW.
Obj. to be transported not in binary form
CLEAR i_objpack-transf_bin.
Start line of object header in transport packet
i_objpack-head_start = 1.
Number of lines of an object header in object packet
i_objpack-head_num = 0.
Start line of object contents in an object packet
i_objpack-body_start = 1.
Number of lines of the object contents in an object packet
i_objpack-body_num = v_lines_txt.
Code for document class
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Packing as PDF.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Smartform_output' '.pdf'
INTO i_objpack-obj_descr.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Document information.
CLEAR i_reclist.
e-mail receivers.
i_reclist-receiver = '[email protected]'.
i_reclist-express = 'X'.
i_reclist-rec_type = 'U'. "Internet address
APPEND i_reclist.
Sending mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = i_objpack
object_header = w_objhead
contents_bin = i_objbin
contents_hex = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
WRITE:/ 'Error When Sending the File', sy-subrc.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.Hi ashok
thanks for your reply.
i got the error at commit in the below Func module.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = i_objpack
object_header = w_objhead
contents_bin = i_objbin.
if i remove commit = 'X'. no error but mail is not sending.
please advice. -
Error : Express Document "update was terminated" by XYZ.
Hi,
When I am trying to process one output type that I have created, I am getting an error
Express Document "update was terminated" by XYZ.
Here XYZ represents my userid .
I have linked the output type to one printprogram. If I execute the print program standalone,
it is working fine. But if I try to process the output , I am getting the above error.
Please suggest the needful.
Regards
RudraHi..
thnx for ur reply....I got the reason for error
Maybe you are looking for
-
How do i transfer videos from one iTunes to another?
I understand that i need to go into Itunes File then Add to libruary select what i want to transfer but what do i do after that?
-
How to Provide Native Methods in an Executable?
Hey there, I'm writing a native Java launcher as a replacement for java.exe (or eclipse.exe). So far I'm only on Windows NT x64. Things work pretty well: My native executable launches the JVM using the Invocation API and calls a static `main' method.
-
Need info on Which Hardware and Software
hi to all Gentlemen i work for a company which wishes to make its own in-house audio video editing studio .. the studio will do proper audio editing and video editing using its own HD camera. now for this purpose i proposed a MAC PRO system (no probl
-
A website recommending that I install Codec Performer opens a new window about every 10 seconds. How can I stop this?
-
Satellite A110 - WiFi switch is not working with new WiFi card
Hello Everyone I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working. New wifi card is discovered and d