When rendering a project, FCPX did not stop at 100% but appeared to keep rendering - when it reached eleven thousand something, I quite FCPX (it allowed me to quit).

The background tasks indicator just kept going and going... 200, 300... 400... 600...800... When I opened the background tasks window, the only process it said was active was rendering.
I clicked on "stop" but it ignored me, kept counting on and on.... 1000... 2000,,, 5000 I clicked Pause, it didn't ignore me but still kept counting... 7000... 10,000...
I went to my activity monitor on my mac and from what it said (like, 97% or so idle), I surmised that it actually had stopped rendering. So I quit FCPX - no problem, no "not responding" or "force quit" or anything.
My external harddrive was still whirring (that's where my project is stored) so with much trepidation I ejected it: no problem...
After my question I (agian with much trepidation) opened FCPX, did some editing, rendered, exported, without problems.
But I'm concerned about what might have caused this bizarre behavior and what to do if it happens again.
any thoughts???

Similar Messages

High Availability Installation issue (ASCS instance did not stop)?

Hi,
We are facing an issues in High availability system installation. (ERP ECC6.0 EHP5) We have completed Node A installation.
We are installing based on Virtual IP.
Node A Installation:
Steps 1: ASCS instance
Step 2 : DB Instance
Step 3: Enqueue replciation Server istance
Step 4: Central instance
I have complete these steps successfully. But We have started Node B installation. We have faced error in Node B. Error is on ASCS instance.
Error Details: "SID/ASCS00(partially) did not stop. " In ASCS instance 5th phase, we are getting this error.
Due to this error, We are not able to continue the process.
Could you please help to solve this.
Thanks!!!

Hi Sir/Madam
I have one to install SAP cluster with two node with window server 2003 x64 R2, SQL server 2005.
below it is my step.
1. assume my window cluster and sql server are working fine.
2. I have start install ASCS on virtual disk from node 1.
3. i have install First MSCS on virtual from node 1.
4. I have install Database instance on virtual disk from node 1.
5. I have install Second MSCS on virtual from node2.
6 I have install ERS on physic disk on node 1.
7. i have instgall ERS on physic disk on node2.
8 i have install CI on physic disk on node 1
9 i have install DI on physic disk on node 2.
this is procedure that my consultant have set up on my real sap system . but when I try to install on lab . i got error when i finish on step 5 above .
could you please tell me the above step is correct or not ?
thanks .

I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update.

I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update. Before the update if i had minimized windows they would stay minimized when i opened a new window. Please help ,I would guess it is just a setting somewhere but i cannot figure out where the setting is. Thanks jason

This issue can be caused by the ASK.com Toolbar.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Firefox crashed while automatically downloadingthe latest version, and when I reopened it, it did not give me the option of restoring my lost tabs. Is there any way to recover them now?

I don't know what more details to offer. The browser crashed, all my open tabs were lost, and when I restarted Firefox, it did not give me the option of restoring the tabs. I really want them back. Is there any way to roll back and recover them?

That gripes me to no end, as well. You might think Mozilla could think this one through, at least to the point of realizing there should be a manual means to recover open tabs NOT restored automatically after a routine FireFox crash.
And if Mozilla cannot stabilize FireFox, it will keep losing users back to IE.
The epidemic of crashes seemed to begin when FireFox "improved" itself with the idea of running 3rd party plugins in a "container", which is still far from reliable. I must run SysInternals Process Explorer at least once per Windows session to keep FireFox from destroying itself.
Aside from FireFox being so unstable, Mozilla should show some concern for users and make the manual restore option very plain from the UI-- such as "RESTORE OPEN TABS LOST SINCE THE LAST (*&&!!! FIREFOX CRASH"
Presumably-- and that may presume too much-- Mozilla leaves the open tabs "log" in place during each update. If that record of open tabs remains untouched from update to update, then why does FireFox screw up, update after update, and routinely fail to recover all tabs?
You might think someone at Mozilla would realize something is wrong. I have let Mozilla "phone home" after each crash, and yet the problem continues.

My iPhon 5 s iOS 8.1.2 since 2days when i am receiving videos through watsapp it did not play and a letter appear said videos are not included in the iCloud backup how to make it included ?

my iPhon 5 s iOS 8.1.2 since 2days when i am receiving videos through watsapp it did not play and a letter appear said videos are not included in the iCloud backup how to make it included ?

You can recover Your music but not with original names.
1. Go to Your iPod hard disk
2. You must to see hidden files (if you don't see them go to in system explorer to Tools > Folder Options > View > and mark Show Hidden Files)
3. Go to folder named iPod_Control
4. Copy folder Music - this is Your music but not with originally names
I'm must to say sorry - my English is not very good - I'm still learning
I hope it helps

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request. How do I get Safari to be normal again?

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request. How do I get Safari to be normal again?

I recently purchased used macbook pro 15" but unfortunately i erase the harddisk and did not have back up but when i try to reinstall the mac os x lion it ask me the id password,how i can purchse the mac os x lion.

i recently purchased used macbook pro 15" but unfortunately i erase the harddisk and did not have back up but when i try to reinstall the mac os x lion it ask me the id password,how i can purchse the mac os x lion.
where from i can buy the mac os x lion because i am using windows base system when i try to buy from apple web side it show in app store only not in itunes

Have you tried booting from the Recovery HD to reinstall Lion?
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
You will need the Apple ID and password used to purchase Lion. If you have not purchased Lion, then you will need to purchase the Snow Leopard DVD and install Snow Leopard then update it to 10.6.8 to access the App Store where you can purchase and download Lion under your own Apple ID. Or you can purchase the Apple USB Lion installer flash drive at any local Apple retailer or the Online Store.

When I downloaded Firefox, it did not copy my Favorites List from Internet Explorer

When I downloaded Firefox, it did not copy my Favorites Bar from Internet Explorer. If it did, I don't know where to find it on Firefox. Can you help?

Look for a folder named '''from Internet Explorer''' in your bookmarks.

HT4061 i did not set a passcode but the Ipad is prompting for one

I did not set a passcode but the IPad is prompting for one

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Hello I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room. suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine. I have already tried resetting it

Hello
I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room. suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine. I have already tried resetting it with a pin, resetting it while plugging it in, and trying to find it in airport express setup (the setup assistant can't find it at all).
What am i doing wrong?

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

I am a student and i bought an macbook air about 1 month ago but i did not get the 100 giftcard from the apple store. can i still get it?

Hi, I am a student and i bought an macbook air about 1 month ago but i did not get the 100 giftcard from the apple store (that comes when students purchase computers).Am i still eligible to get it?

Not usually.
Apple has had similar offerings every year, to which they always establish a time interval for elligibility. I've not seen where they give credit to prior sales on the education perks.

Cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

Can you upload a facebook cover created in elements 13 to page that you manage? This is not my personal page but a community page. When I try to do this Elements asks me to revert back to my personal page.

Can you upload a facebook cover created in elements 13 to page that you manage? This is not my personal page but a community page. When I try to do this Elements asks me to revert back to my personal page.

Hi,
You can also try one more workaround for this by using PSE Organizer. The steps are as follows:
1. Create a facebook cover. In case you don't know how to creatw a facebook cover, please go through Photoshop Elements Help | Create a Facebook profile and cover picture
2. Save the cover with "Include in Elements Organizer" option checked.
3. Now, go to Elements Organizer and export that file.
    - Select the cover photo.
    - Go to File > Export as New File
    - Choose format and location.
    - Click OK.
4. Now, you can use this file to upload.
If you stuck somewhere or need any other assistance, do let me know.
Thanks,
Swapnil

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work. What should I do

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?

Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

When rendering a project, FCPX did not stop at 100% but appeared to keep rendering - when it reached eleven thousand something, I quite FCPX (it allowed me to quit).

Similar Messages

Maybe you are looking for