When request is submitted it goes for pending standby for long time

Hi all,
Does anyone have any idea about this?
When im running oracle standard report on production its going to Pending Standby for long time and then it works normally whereas when i run the same report on clone server it directly runs without making any wait. Can anyone advice me what could be the issue related to this. Im unable to get to the root cause, so need your advice.
Ours is 12.1.2 EBS - RAC (11.1.0.7) - HPux (11.31) env for production
12.1.2 (EBS) -- Single node(11.1.0.7)-Hpux (11.31) env for Clone.
thanks in advance.

increase some processes in cuncurrent manager.
Reagrds,

Similar Messages

When i download itunes it goes to the thankyou for downloading itunes page.. but hats it no download begins....help

When i download itunes it goes to the thankyou for downloading itunes page but then nothing happens ???

Try a different web browser and see if that has better luck.
Regards.

Report for Pending GR for STO

Dear All,
can anybody reply me is there any standard report for Report for Pending GR for STO.
if not how can i do with not developing new report ...i mean from exel or etc.
Regards,
Yashpal Supe

Dear sir
In MB5T stock in transit there you give your receiving plant . it will show the list
Regards
jrp

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

Servers have been swamped. Keep trying and be patient. Wait a few days.

HT1351 for syncing it takes long time and not completed what to do???

for syncing it takes long time and not completed what to do???

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

Report for Pending 103 for 105 (If GR based IV is untick condition)

Hi,
I required logic for mapping the report in Pending 103 for 105, If GR based IV is untick condition in PO.
Our business accept the material with movement type 103. After various tests (outside SAP), we post this document with movement type 105.
Normally each MIGO document has a reference document no . In case of 103 document, the reference docu no is the same no. In case of 105 document, the reference docu no is the docu no of 103.
It is noticed that for some 103 and 105 documents, the reference docu no is blank when GR based IV is not ticked in the Purchase order.
We need some logic to find the ref of 103 doc in 105 doc.
Regards,
Maddali

Thanks for your promt reply.
I have seen ME2M/ ME2L with selection parameter we104 or we105. However our client required specific report format for controlling this issue.
So I am trying for logic in this particular senarieo.
Regards,
Suresh

Report (T.CODE) for pending PO for release..VERY URENT

Hi guru's
First i wiil tell clearly abt my requirement, i wnt to get a report(list) of pending PO for release (i want to view the PO, but i dont want the option to release PO).In ME28 there is option to view pending PO for release and also for option to release.
So i went to T.code ME2N, and i create a new scope of list in SPRO.
For reporting , in SPRO i have made (pending for PO release(PPFR) in Scope of list).
To get the exact report in Front end , any further SPRO activites is there to get a report.
Goods solution will be highly rewardable..
Please send me immediately.. urgent..
Thanks
sap-mm

Hi
Simple method for resolving your issue is,
1.Goto Release PO Tcode:me29n
2.Click Selection Variant under document overview on
3.Click Purchase orders option
4.Click Dynamic selection
5.Click purchasing document header
6.Select Subject to release option
7.Choose yes "X" and press enter
8.Enter company code under relevant field
8.Create variant and save variant
9.Execute the screen
It will list all the pending PO's for approval.
Reward point if it is useful.
regards
DVP

Crystal reports for Eclipse (CR4E) - taking long time to load

HI
We have used your Crystal reports for Eclipse (CR4E) but it is taking long time to load if the record count is more than 3 million
Our architecture is we are using Oracle DB and web sphere application server both are running on SUN server,
If we buy original version it will work fast?
Or do you have alternative solution for this, this one to implement one of our major client

You have 3 million records, this is going to take time to process. Also, you don't define what is meant by a long time. Are we talking a couple of minutes, or something more like 20 minutes?
The real question is, do you really need the report to bring back 3 million records? Could you do any filtering of the data to reduce the number of records being brought back? Also, 3 million records could vary. is each record a single field, or is it multiple. The more fields, the larger the result set.
Another thing you want to look at, is just how long is the query taking to run against the database.

Fill Internal Table for Table Header EQUI - Long Time

Good morning,
I have installed DMIS (2006_1_620) and DMIS_CNT (2006_1_620), both at the level of SP = 13.
I am running the subactivity "Fill Internal Table for Table Header EQUI" and have 1 day + 10 hours and continue working.
Also note that the table CNVTDMS_05_equi is increased million in millions and now has 6 million records.
It is normal to take a long time? (EQUI table has 240 million records and therefore will take many days).
Any suggestions?
Thanks,
Hugo

Hello Hugo,
I know this is old , but did you ever find a solution to this. I am having the same problem. I considered adding an index to table QMIH, with Keys MANDT and BEQUI.
I also only have one bckgrd proc running in sender systems with this statement when I drill in using SM50:
SELECT
/*+
FIRST_ROWS (1)
FROM
"QMIH"
WHERE
"MANDT"=:A0 AND "BEQUI"=:A1 AND ROWNUM <=:A2 #
This has been running for over 8hrs now.
Any thoughts?
Thanks,
NICK

In indianvisa App. page; when I clicking a link in this page after a long time (2 hours), it shows me session expired. how can i solve it? Please.

http://indianvisa-bangladesh.nic.in/visa/indianVisaRegDetails.jsp; this is page link. I want to stay in this page for a long time but i can't, they show me a message "session expired". Also I set an add-on namely Session Keeper but don't implement it. Please solve my issue.
Thanks
Bishwajit Das

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

When I click Add Bookmark the bookmark window takes a long time showing up and then starts appearing and disappearing.

I click on Bookmarks in the Menu Bar. Then I scroll to Add Bookmark and click on that. Normally a Window appears allowing me to select where I want the new bookmark saved. Now this window takes a long time to appear if it ever does (sometimes I get tired of waiting). Then when I attempt to put my cursor arrow somewhere in this window, the window disappears. Then it starts appearing and disappearing when I move my cursor around.

That is a problem with an AVG extension or toolbar (tavgp)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

When is Adobe Photoshop Touch going to be available for my Nexus 7?

This is driving me INSANE! The one app that I used the MOST, I can't use at all now that have the Nexus 7 (and Galaxy Nexus).
Being I am not able to use the app any longer, I should be able to be refunded unless they can tell me WHEN it will be available and ready for Jelly Bean.

It's not Jelly Bean specifically; it's your tablet's form factor (7 inches, in this case). I have a Motorola Xoom Wi-Fi model with Jelly Bean 4.1.1 with PS Touch, which works fine (minus a quirky bug I posted a day or two ago).
PS Touch was generally made for 10-inch class tablets. I'm sure that will change, especially with the Nexus 7's popularity. Just have to be patient. You could create an idea but I think I saw confirmation by Adobe on Facebook that they're working on it. Not 100% sure though.

When is the Typekit function going to be available for CC?

I see a lot on here about Typekit; but WHEN will we be able to download these fonts to our desktop for use in our CC applications?

Not sure it helps but this seems to be the somewhat official word from Adobe:
http://blogs.adobe.com/creativecloud/major-update-to-adobe-creative-cloud-now-available/
So, what’s next?
One of the advantages of being a Creative Cloud member is that you get updates and new features continuously. We already have the next batch lined up and you will be seeing the following new features and functionality as soon as they are ready:
Typekit fonts on your desktop. Quickly find the perfect fonts in the growing Adobe Typekit library, sync them to your computer, and have them immediately available for use in any desktop application. Full Creative Cloud members will soon have access to over 700 fonts, installed with a single click.

When is the the iphone going to be available for us cellular?

I am wondering if anyone know the release date for the iphone to come to US cellullar?

vereyezuhn wrote:
wsanders wrote:
Thanks for the replies - in the past few days the ability to block 5 numbers has magically appeared on the Verizon Safeguards page. I tested it and it works.
This is fine if I am ever so unlucky as to be phone-stalked.
Unfortunately, as we all know, SMS spam comes from a variety of random numbers, and the web page says "You cannot block numbers that are within your account or non-10 digit numbers" so presumably it won't work with short codes.
WHAT I WANT: BLOCK ALL SHORT CODES option. Blocking certain area codes would be nice too.
And BTW Verizon support has NEVER offered to assist in blocking SMS spam. More than once, they told me to reply STOP to the spam, just like the spam told me to. Yeah right. Makes me suspicious that VZ is actually sponsoring the spammers.
Actually, replying stop works for most of those non-ten digit SMS numbers. From what I've heard, the call & messaging blocking on the Verizon site does not work for the iPhone 4.
The call and message blocking for up to 5 numbers is now available for te iPhone and began to work yesterday (4/3/2011). If you log into "My Account" and choose block numbers and messages (I believe) then you will see the page that now allows you to block up to 5 numbers. Previously, for iPhone users you got a message that said this feature was not available for the number...at any rate, I tested it and it does now work.

Select Filter value for Hierarchy node taking long time

Dear Experts,
I am facing an issue with the Filter value selection in a BEx query and searched the forum for a solution but found none.
I have a free characteristic with hierarchy enabled for it and the Filter value selection at Query execution has been set to 'Values in Master data table' in the query definition and in the Multiprovider as well.
However, whenever the filter value selection is performed, the values are being read from teh underlying infocubes instead of the Master data.
We tried checking the BIA Index for the cube as well as the InfoObject and all is fine.
Can someone please point what might be going wrong here.
Thanks & Regards,
Sonal

Could you please check as per Note 1565809 and make sure the F4 mode is really M mode in each level settings?

When request is submitted it goes for pending standby for long time

Similar Messages

Maybe you are looking for