When restored  replacement phone I get an error come up saying error (-50)

when I restored my replacement phone I get a message restore error (-50) can anybody help

Try Recovery Mode.

Similar Messages

  • TS3694 when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    when restoring my iphone i get an error code of 1015 , why is this and how do i restore my phone as now its stuck in recovery mode ?

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • HT201413 I have a windows HP computer with windows 7 installed, when I try and update and restore my phone, I get an error message of there is not enough space on your computer to restore your phone. Any suggestions and help is appreciated.

    I have a windows HP computer with windows 7 installed, when I try and update and restore my phone, I get an error message of there is not enough space on your computer to restore your phone. Any suggestions and help is appreciated.

    You need to discard or save to an external disk and then discard some of the stuff we all tend to keep forever (movies, music, pictures, docs, apps no longer used, etc.). A clogged up disk also does not function ideally either.

  • Restoring i phone 3gs getting unknown error 28

    Restoring i phone 3gs getting unknown error 28, restore failed....

    what error code is it?
    Check out http://support.apple.com/kb/ts3694 for causes and solutions !

  • TS3694 when i try to restore my phone i get a error 21 message , how can i ressolve this ???

    my iphone 4 will not restore when i try to do it i get a error 21 message , what do i try next

    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

  • HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device.   But when i use a gigaware (radioshack brand) usb charger, no error msg.  Why?

    - Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
    - Could you have damaged something when you took the iPod apart and replaced the Home button?

  • When i restor my iphone i get an error message  what can i do

    when i restore my iphone i get an error message 1601?
    my phone has froze and i cannot connect it to itunes, windows keeps saying i need to install the software but then it ask for a disk to do this. I dont have one and i cannot use my phone as it is stuck with the itunes and usb lead on the screen.
    Please help?

    In the course of your troubleshooting to date, have you worked through the 1601 (and related) sections of the following document, tanya?
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    Likely this:
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • My phone is stuck in recovery mode-when connected to itunes I get 1611 error code

    my phone is stuck in recovery mode-when connected to itunes I get 1611 error code

    Please see the  More Like This  section on the right.

  • TS3694 i think itunes  has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

    i think itunes  has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

    From the article which you posted your question from:
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed.   Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • HT1414 Iphone 3G restarts right in the middle of restore so I keep getting unknown error message.

    Hey everyone, I have an old school Iphone 3G, it restarts itself right in the middle of a restoration so I keep getting unknown error message. I don't know why but no matter what usb port I plug it into, the white bar underneat the Apple logo on the iphone will get right close to the end but then like I stated earlier the phone restarts randomly, so it won't let me restore the product because it keeps getting reset by itself.
    please help me

    Thanks for helping out, but I already tried these steps.
    I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
    Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
    So, it turns out that a broken battery can cause this behaviour.
    But thanks again

  • I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    wen6275,
    It looks like you're actually using a camera or phone to take a photo of your monitor.
    That's not what is commonly known as a "screen shot". 
    It looks like you're on a Mac.  Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
    I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
    Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file.  Would you mind elaborating?

  • When I close Firefox, I get an error That says "The insstuctions at 0x7c911389 references memory at 0x0000010. The memory could not be read

    When I exit Firefox, I get an error message that says The instuction at 0x7c911389 referenced memory at 0x000000010 The memory could not be read.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • When I open iphoto I get an error message that says Your photo library is either in use by another application or has become unreadable,

    when I open iphoto I get an error message that says Your photo library is either in use by another application or has become unreadable, I have tried restarting computer and opening iphoto whilst holding down option and command key, but then I get the following message-Your photo library is damaged or unreadable and cannot be opened. Please restore from a backup.  Please can anyone help?

    Make a back up now. If you have any vaule in Your photos always have a back up.
    Most Simple Back Up
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex:
    Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
    In Library Manager the Rebuild command is under the File menu. There's also an excellent Help available.
    Regards
    TD

  • Lost pix when restoring new phone

    I lost my phone while on vacation, got a new one, and took tons of pix.  When restoring my phone from my laptop back at home, I seemed to have lost the hundreds of pix I took while on vacation.  Anybody know how to get them back? Lost cause?

    If your contacts are still on your 3GS download the free app My Contacts backup on your 3GS.  It will back up your contacts and an email attachment.  Send this email to yourself and open it on your 4S.  Tap the attachment to import your contacts to your 4S.  Don't know what to tell you about your iPhone 4; your contacts there are probably gone.  If they are the same as the ones on your 3GS, open the same email and import your contacts on your iPhone 4.

Maybe you are looking for

  • Where would i get Batch Size in SAP BI and what is the cocept of Batch Size

    <heading 4> Dear Experts,               I have to create a report on batch size adherence i.e. Actual Vs. Standard Batch Size Deviation,but i am unable to find batch size in sap R/3 AFKO & APPO tables and was unable to find it in material master too.

  • Can't create new messages in Mail

    When I click on New Message or Reply I don't get a new window or a new draft message. Nothing seems to happen. But if I quit Mail and then re-launch, I get all the new mail windows appearing, and they are all there in my drafts mailbox, and they can

  • Creating Employee Badges using Crystal Report.

    Hi, I have a requirement where i have to create Badges for Employees using Crystal Reports. The report is created but the issue here is when i generate the PDF output, apart from the portion of the rectangular Badge, there is lot of white spaces on t

  • J2EE App Server with virtual servers

    H! ! I have a Win2K with J2EE App Server 1.4. Everything is working fine. In this computer I stopped the IIS 5.0 in order to use the HTTP Server included with the product. I also run the DNS on the same machine with 3 domains. All name resolutions fo

  • Bluetooth mouse is not connected after reboot or bluez restart

    I followed all possible guides to make my Apple MagicMouse. I saw on the forums that the key is to mark it as "trusted". I did it in bluetoothctl and put it to "trusts" file in /var/lib/bluetooth/xx:xx..../. It works fine if I connect it manually but