When ripping a DVD, is the original DVD damaged (using Disk Utility)?

A friend wants me to make copies of a couple DVDs of her new baby to send to family, but she's keeping the original DVD for herself. Before I use Disk Utility to burn it to a new disc (using the "New Image" method), I wanted to make sure the original copy will not be damaged in any way. After I rip it, the disc will play normally when she puts it in her computer/dvd player, right?
I apologize if this is not the correct community or something--I wasnt quite sure where it fit in.

It’ll remain as is.
(110092)

Similar Messages

How to write DVD using disk utility

I have ripped a dvd to my harddrive to make a backup copy of my dvd. Toast Titanium is giving me error while writing to dvd drive. How can i use disk utility to write this dvd.

How to use Disk Utility to back up the HD

I'm trying to back up my HD onto an external HD as described in "The Missing Manual" (Tiger ed.), p. 389. I choose my Macintosh HD, read/write, no compression, and the appropriate partition of the external HD as the target.
But just after telling me it's creating the disk image (I guess I can't just drag the whole HD without using Disk Utility) it stops, saying, "resource busy).
What am I doing wrong?

You cannot backup your entire hard drive to a disk image. Essentially there isn't enough space to do that nor is this the best method for doing a full disk backup. Full disk backups should be done to an external hard drive using proper backup software. You can clone your hard drive to an external drive using the Restore option of Disk Utility but DU cannot do incremental backups. For that you need backup software:
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
To clone with Disk Utility do the following:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
For added precaution you can boot into safe mode before doing the clone.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

A duplicate DVD made on my iMac will not play on it although the original DVD will play on it and on my TV. Answers?

I made a duplicate of a DVD on my iMac but it will not play on it. The original DVD plays on my iMac. The duplicate will play on my DVD player with my TV. The original DVD is not a copyrighted commercial DVD.

That doesn't create a DVD. It makes a copy of the files on the DVD. All you did was put data files on the disk. A disk must be formatted correctly for a DVD player to recognize it as a DVD.
Use Disk Utility to make an image of the DVD, then burn the image to Disk.
File menu, New>Disk Image from <DVD name>
Set the image format to DVD/CD Master.
Once the image is finished, select it in the Disk Utility Sidebar and click the Burn button.

I can't install the software from the original DVD

Welcome..
I have purchased software:
ADOBE INDESIGN CS 4 ME
but I can't install the software from the original DVD after I change the hard disk and the operation system of my computer..
after I click "Install" the installation stop directly!!
I need to download "ADOBE INDESIGN CS 4 ME - Arabic language support" for windows 7..
thank you,,
Best Regards,,

Welcome..
This is the answer from http://www.winsoft-intl.com:
"Dear Majed,
We would like to thank you for your email and we are sorry for the problem you
face.
Since Mid-October 2012 WinSoft are not able to support Adobe Product, You
should contact Adobe support
Best regards,
Winsoft Support Team."
And this is another answer from http://www.winsoft-intl.com:
"Dear Majed,
thank you for contacting us.
Please note that since 2012 we are not Adobe reseller anymore and do not provide Support for Adobe products.
Please contact Adobe directly or any authorized reseller in your area.
Sorry for not being able to help you further.
Kindest regards,"
and Before that Adobe support service told me they can't give me links to download!! (or they do not have links to download!!)
I can't believe all this happening with Adobe Toward one of its clients....!!

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

Commercial
Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
Shareware or freeware
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
Disco
<http://discoapp.com/>
no longer supported, but free, simple, and runs well under SL.
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple, and runs well under SL.
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are, but runs well under SL.
Terminal Whiz Kid
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

"Resource Busy" error during image creation,using disk utility when booting up from installation DVD

Hi all, first post to this community, wish all well
I have a MBP which is more than three years old, installed with OSX Leopard 10.6. Recently the MBP failed to to start and I tried to follow some articles online, including some from this community, to repair my disk, and more importantly, to backup data on the startup disk. But it does not work quite well so I try to seek some help here.
What I have done is to bootup with the installation DVD, try to verify and repair the disk using disk utility, which tells me it can't repair and recommend to backup, erase and reinstall. Am fine with this recommendation but now the problem is on the backup part. There are two partitons on this 500GB hitachi SATA disk. One is 300G which is for OSX itself, and the other 200G was partitioned for Time Machine. The repair failure is on the OSX partition which contains most of the recent data that I want to backup/restore. And unfortunately the Time Machine backup was stopped about two month ago, for some stupid decision I have made , while I am hoping to recover some data for the past month.
Currently the SMART status of the whole disk is verified, the OSX partition is unmounted with no details in the Available, Used, Number of Files, etc. From what I have researched (correct me if I am wrong), I highlight the OSX partition from the list on the left, click 'New Image' button on top, and select the destination to try to create an image of the current partition. But regardless of my desintation (Time Machine partition, or external USB drive), the imaging process always failed with Resource Busy error. Some online search suggest that the partition must be in unmount status but seems it does not apply to this case.
Would be really appreciated if anyone can give me some advice on what's the 'resource busy' error mean, how to backup the OSX partition, or what are the other possible alternatives.

Very poor idea to keep the Time Machine backup file on the internal hard drive. They should always be put on an external drive. As when the internal fails you lose everything. Which is what I suspect has happened.
More then likely your internal drive is failing. the only options to get a new internal drive and a SATA to USB adapter. Install the new drive inside the system abd install OS X on it. Then once that is finished and you are booting from it connect the old drive to the system with the SATA to USB adapter and copy your files off the old drive. That is if you can.

I am able to 'create a new version from original' but when I try to export the original, I only get a .jpg with the XMP file. The original is obviously there but why can't I access it please?

In Aperture 3 when I right click on an image I am able to 'create new version from original' which suggests that the original is there. When I try to export the original I only get a .jpg with the XMP file. These particular images are from 2010, has the RAW file become disconnected somehow? Please, how do I get access to the RAW file for editing in Ps? Thank you. Thomasrevil.

Sorry leonie, 'Use RAW as Original' is not an option for the image shot with the Canon.
Then your Import settings must have been different, when you imported the Canon photos.
You can check, if there is still a hidden raw file somewhere. If the image has been imported as a pair, you should see the "J" badge in Browser and Viewer, if you enable badge overlays. This indicates a pair, with the jpeg as original.
Select one of those images, and then relocate the original files "File > Relocate original" to a folder, where you can inspect it. Use "File > Show in Finder" after ward. Look, don't touch .
Then put it back, using "File > Consolidate".
Do you see your raw files in the folder, or is only a jpeg there?

When installing an upgrade, does the original software need to be present on the computer?

I lost my extra hard drive which housed Premiere Pro 1.5 which was an "upgrade" package from Premiere 4.5. When I reinstalled the PP 1.5 on a newly installed drive it acts as though it cannot find some codecs or at least it doesn't recognize compression of files I previously created with it. Are all parts of a package included with the upgrade or does it use some of the original package? Since the original P4.5 never resided on the new disk I'm wondering if that is the problem. If so do I need to install the original P4.5 then reinstall the PP1.5 over the top? Help. I know this is an old package but it serves my purposes if I can just get it to work again!

How do you then get the little icon next to the bluetooth icon at the top of the screen to display. The icon that when you click on it, it gives the option to Open Airport Disk Utility.
Thanks.

I want to produce wedding dvds.whats the best software to use...final cut x I'm thinking but what about the quality of the dvd?

i want to produce wedding dvds.whats the best software to use...final cut x I'm thinking but what about the quality of the dvd? Can i use idvd?

The only Programms I worked with are DVD Studio Pro and iDVD. You can burn a Video-DVD with Toast but there is no real option to design your Menu. Just a few themes as far as I discovered.
Do you have a Blue Ray Device to burn* the HD-DVD? Are the Bride and Groom able to watch the Blue Ray?
* which is only possible with DVD Studio Pro and not iMovie as far as I know.
This might help
For better quality I would go the Compressor & DVD Studio Pro workflow I just learned.
Export the Movie as is from Final Cut Pro and then use Compressor to encode the File.
Consider delivering the Movie in a different way like a private video on vimeo, a Website or on an SD card which is not really romantic...

Can I duplicate a dvd using disk utility but exclude the menu?

I want to duplicate a dvd but exclude the menu. Can I do this using disk utility?

No, Toast automatically handles the copying process—it creates a temporary image, burns it, and then deletes it.

When I respond to email the original message won't appear. Why is this?

When I respond to email the original message won't appear. Why is this?

Check Mail/Preferences/Composing/Responding to make sure the box is checked for Quote the text of the original message.

Using disk utility to burn new image dvd's

Ok I just learned to burn DVD'd using Disk Utility and New image.
But I have come to halt in my burning with a new issue.
My issue is that I have a file that is 4.63GB. When I make a new image so that I can burn it, it increases the size of the file(Video TS) to 5.13GB. Making it to big for a 4.7GB DVD.
My question is is this normal for the new image file to increase in size, and is there a way for me to stop this from happening. Or can anyone give me any other suggestions. Please help.

Ok I have never tried that, as this is the first time it is suggested to me.
The reason i have been doing it via DU, is because this has been to only way to get it to play on
home DVD player and burn with the UDF setting. I was told to do it this way when I was trying to burn
copies of my nieces fifteens that was prof. done on a DVD.
I am trying to burn a copy of a movie so that it can be played on home dvd players. Yes I have done this before and the copies I burned via DU/new image, worked perfectly. And the ones I burned by just choosing file and burning it did not work.
So any help would be great.

If leopard won't boot from dvd, use disk utility mount to partition

wanted to share a way that i successfully installed os 9, tiger, and leopard on 1 hard drive. first of all, leopard was the only installation that i had difficulty with. it would not boot off the original dvd, no matter if i held down the 'c' key or the option key, so this is what i did after a lot of reading on the internet to try and troubleshoot this issue.
First thing i did was partition my internal hard drive in 3 partitions using disk utility. the 3rd partition was around 9gb. I installed os9 first on the 1st partition, i then installed tiger on that same partition. then i put in my leopard dvd, and opened up disk utility. and clicked on "restore", and dragged the dvd image as the "source", and chose the 9gb partition as the destination, and clicked on restore. then, i changed the "startup disk" to start from the 9gb where i just restored the image, and rebooted, and went through the leopard setup and chose the 2nd partition as the place to install. this should work with the dvd, or if you made an image from the dvd. I hope this helps someone else whose dvd won't boot, because it was very frustrating after you purchase a faster processor, and faster video card so that your system meets the requirements, and then the dvd won't boot.

Two ways. Use another computer to restore the install disc to one of those ext HD. Then, use it to boot the other machine. Get an ext CD/DVD reader and use it to read the install disc and boot the machine. However, if both the HD and optical reader are kaput, then a trip to an Apple repair station is in order.

When ripping a DVD, is the original DVD damaged (using Disk Utility)?

Similar Messages

Maybe you are looking for