When running a query of a 0IC_C03 cube copy inventory shows as blank
When loading the 0IC_C03 cube copy ZMM_C01 Cube: Material Stocks/Movements, if there
is no movements for that day in a plant the inventory values do not show when we run a query on that key date
When we create a movement type and run the extraction then the ending inventory values
will show when we run a query usig that key date.
So if there are no movements types for a plant then the inventory balance does not show up in our query reports. Once we post a
movement type for a plant and extract data then rerun our reports then the inventory balances show up.
Refer link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc?QuickLink=index&overridelayout=true
& check ur e-mail.
Similar Messages
-
Issue when running Balance sheet report on Virtual Cube (0FIGL_V10)
Hi ,
We are actually implementing new General ledger and I activated all the underlying ODS & cubes.
While running standard report(0FIGL_V10_Q0001) on 0FIGL_V10 , I am getting the following error:
Characteristic 0GLACCEXT has a constant value (F) and cannot be used.
Characteristic 0GLACCEXT Financial Statement Item not available in the Infoprovider.
FYI, The above characteristic is available in the cube and I dont know what is the fix for the same.
Can anyone please let me know if the same problem was faced and resolved.
Regards,
KumarHi Sumit,
Thanks for the response.I did following checks in RSRV yesterday before I posted this thread.
Master data checks for 0GLACCEXT went successful but when I checked my Infocube and dimension tables,its giving me the following error:
Diagnosis
There is no dimension table for dimension /BI0/D0FIGL_V102, even though the dimension is not a line-item dimension.
Procedure
Try to reactivate the InfoCube. Data that is contained in the InfoCube is not deleted.
As per the above procedure , I reactivated the cube and tried running the query but it still gives the message,0GLACCEXT characteristic cannot be used.
I can see all the dimensions in the Infocube(0FIGL_V10) coming correctly and I also can reactivate but still the error doesn't go.
I also tried installing the Cube one more time if the error was because of not installing properly and I tried running the report but still I did not get to a resolution..
I am now not sure , what to do to fix this problem.
Regards,
Kumar -
'Structure Changed' Error when running a query
Hi,
I created a query with 2 structures. One structure for the time periods and one with Key figures (Calc and Restricted).
The query ran fine and subsequently I put this into a workbook which had other queries and made a workbook type report.
I modified the structure with the key figures recently and when I run the query now a popup box appears saying "warning; structure changed" and lists down the query elements that I changed, and subsequently the query does not run (no data is displayed).
But if I open the same query in design mode and do nothing and run the query again (with the same input parameters), it runs ok.
Please advise on how I can sort this out.
Any help would be greatly appreciated.
Thanks,
DominicHi,
If you want, you can remove the query with 'Remove Query' option in the BEx toolbar and then re-insert the query and then save the changes to the workbook. The next time, you refresh the workbook you won't get any such messages.
Thanks -
"SYSTEM_FAILURE" error message when running BEX query
Hello,
I often encounter this error when I run BEX queries (take note that I encounter this error after I have already entered the query values). But when I run the same query in a later time, the query becomes successful, which makes the problem intermittent. I only encounter this when running BEX but I don't encounter such error when I'm running the query in RSRT and displaying it in SAP instead of in Excel. I hope you have any idea about this. Thank you.Hi Lee,
Check transaction ST22 or SM21 after you get that message.
Hope this helps.
regards,
Diego -
Upload a text file of values when run a query
In SAP BW 3.x BEx Analyzer, we can import a text file with list of values for each variable.
For example, you want to run a report for certain product numbers, but say the prod no list is of 3000 no's long, it'll take the user forever to select and enter them in the report entry variable, so instead you upload a text file, with all this list of 3000 prod no's and run the report.
Does this option still exist anywhere for version 7.0? BI Analyzer is different than Bex Analyzer. Can anyone explain it? Thanks!Hi Qingbo,
Not using any standard solution (i don't know any in 3.5) you can use an variable of type exit. Inside the variable value calculation, you can use a flat file stored in the application server to read the values of the variable.
Another option is to store those values in a cube (mantained using flat file upload or a BPS layout) and use a replacement path variable using a query over this cube to run the query you need.
Hope this helps.
Regards,
Diego -
Getting SQL*Net more data from client waits when running a query through web based interface
Hi, you all,
We are having this weird behavior when running query through web based interface, we get a lot of "SQL*Net more data from client" waits, the OEM indicates that the current wait event is SQL*Net more data from client
It's just a very simple query wich invokes a db link.
When I execute the same query on any PL/SQL tool like toad or sql developer it works fine, but that query inside an application executed through a web based interface, it hangs for ever.
Where can I start looking for the problem.
We are working on a 3 Node RAC 11gr2, both databases are on the same RAC.
Thanks.Hi ,
we managed to reproduce the case in test environment, below are the steps:
1)have 2 databases on different machines, will call the first one local, the other one remote.
2)in the local database create:
a - DBLink to remote database.
b - read data from remote database(we simply used select count(*) from dummy_table )
c - insert data into a table on the local database
d - terminate the connection between the 2 databases (disconnect either machine from the network)
e - commit on local database.
what we noticed was the following:
1)when the local database is disconnected from the network(the machine is not connected to any network at the moment): almost immediately throws an error, and issuing the following:
select * from dba_2pc_pending;we found some data .
2) when the remote database was disconnected(the local database is still connected to the network):
after 7-8 seconds an error is thrown, and issuing the following:
select * from dba_2pc_pending;did not return any data.
since this is pretty similar to our case ,we concluded that it's a network issue.
is this the correct behavior ?
as a temporary solution till the network issue is fixed ,we did the following:
1) changed the call of the remote procedure to calling a local procedure that calls the remote procedure.
2) added pragma autonomous_transaction to the local procedure.
3) at the end of the local procedure rollback the autonomous transaction.
it seems that since the global transaction does not use the DBLink database does not issue a 2PC commit.
this works in my cases since the DBLink is only issed to read data. -
Query not showing detailed result when run through query Designer or Portal
Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PMHi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik -
Choosing a Context when running a Query
Hello,
I have 4 Facts Tables my Universe A, B, C & D, thus have 4 context paths
A, B, C and fact tables and share common dimensions within them. D is a view which I created which takes the value from the A & B Fact tables .
I ran a query which takes all values from D and it works fine, however when I run a query taking all values from either A or B, it asks me to choose the context. The best part is that the context which query is based out of is not selected.
Question) How do I ensure that I do not get this message every time, as the intent is that all the data for all the filters will be dumped into Excel via QAAWS for the Xcelsius dashboard.
Please advice.I have a star schema, ie 5 FACT tables and 7 dimension tables, All fact tables share the same dimension tables, some FACT tables share 3 dimesnsions, while other share 5 dimensions.
I did adopt the best practices, and as recommended in the book, I tried to resolve them using Context, as it is the recommended option to Alias in a star schema setting. The contexts are resolved, but I still have loops. I also cleared the Multiple SQL Statement for each context option, but no luck. I need to get this resoved ASAP,
I checked all the context and they look fine, however when I again go to detect context it asks me to add the context which is already present. It give me an option to overwrite? Besides, I also get some Alias options. However I was told and it was mentioned in the book that Alias is not a good option to resolve loops but context is when you have a STAR SCHEMA.
Please suggest idea.
AP -
Error when running a query against Multiprovider using 0FIGL_VC1
Hi SAP Gurus,
I'm creating a MultiProvider for FI-GL.It has 2 Cubes.one is 0FIGL_VC1 (Virtual Cube) and other one is Customised Cube.When I run Query against this MultiProvider with the combination of basic cubes key figures,I'm getting an error
'Abort system error in Program SAPLRSDRC and Form RSDRC/Form DISPATCHER/RECEIV '
then system gets disconnected from the Server .
Please give me the solution to fix it & I'll assign the points .
Thanks & Regards
RajaHello Suman,
Check the table rszglobv for this variable - ZCONLEH.
If it is available there then see which infoobject it belongs to and then look for that in the query designer. May be resaving the query solves the issue.
If the variable is not available in the table, then it seems that the variable is lost and you might have to recreate it for keeping the semantics of the query the same as it was before the upgrade.
Regards,
Shweta -
Dear all,
When i run a qurey ,i got the wrong message:
Cannot load query "Z1SC_O40_Q002" (data provider "DP_1": No authorization for requested service)
I think i forget to add an Authorization Object for the user. Thank you ~
Best wishes!Aaron,
Execute this query "Z1SC_O40_Q002" with an admin/master user as the user in this case is causing this issue.
You can do this by going to transaction RSECADMIN -> Users-> Execute as, please use the option with
log, execute the query, then afterwards go back and check the authorization log, to display the rights provided
to this user.
I hope this will help,
Diego. -
Error message when run a query
I got an error message when I run one of the query on the portal:
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
INFO
No connection to system BI_SAP_QUERY available
com.sap.ip.bi.shared.SharedText system_not_found
BI_SAP_QUERY
No connection to system BI_SAP_QUERY available
com.sap.ip.bi.shared.SharedText system_not_found
BI_SAP_QUERY
ABEND BRAIN (892): 1 SIDs from characteristic USITM are missing (CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2)
MSGV1: 1
MSGV2: USITM
MSGV3: CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
What problem is this? How to fix it? Thanks in advance!Hi Zheng,
Import Support Package 04 for Release 3.50 (BW3.50 Patch 04 or SAPKW35004) into your BW system. The Support Package will be available when note 0693494 with the short text "SAPBWNews BW 3.50 Support Package 04", describing this Support Package in more detail, is released for customers.
Regards,
Anil -
Unable to extract data when running a query
i have create the InfoObject , InfoCube and the DataSource . the DTP shows that everything is running fine but when i design a query and execute it, it show "No Applicable Data Found.". so what are the possible reason for this to happen?
Hi ,
there can be two possible error which causing to not showing data in queries,i will explian both of then below-
(1) go for the characteristic info object for which you are making query,and check that objects bex properties,it may -data or text.
use same property in query for that characteristic .the way to do this is -open query in change mode,go for that characteristic ,right click and go to properties and there change the properties respectively.
(2) may data is not loaded correctly for that Info Provider on which u made your query.
check the data mart status (right sign on the left hand side in request tab of that info provider, to reach there right click info provider and go to manage. )
about ur problem of not loading data again on info provider,if u already loaded the data ,delete the erroneous req by making it red first and then delete it.
IF there is no already data in info provider then go to psa and check the erronreous record in respect of correct records(i hope u r using PSA during loading data to info provider ), ther u find the clue of failure ,in most of the cases it becoz of presence of special characters,
hope it helps. -
BEx error when running a query or workbook
Hi guys,
We're experiencing the following issue (trace dumped below) within BEx, while running either queries or workbook. Nothing special in ST22.
SM21 says:
Communication error, CPIC return code 020, SAP return code 223
Conversation ID: 53497548
CPI-C function: CMSEND(SAP)
We're using:
BEx version "7.x (based on 7.20)", SP3, revision 1728
SAP version
SAP_ABA 700 0023 SAPKA70023
SAP_BASIS 700 0023 SAPKB70023
PI_BASIS 2006_1_700 0013 SAPKIPYM13
ST-PI 2008_1_700 0003 SAPKITLRD3
SAP_BW 700 0025 SAPKW70025
FINBASIS 600 0019 SAPK-60019INFINBASIS
SEM-BW 600 0019 SAPKGS6019
BI_CONT 703 0016 SAPKIBIIQ6
ST-A/PI 01M_BCO700 0001 SAPKITAB7F
Dump content:
3/3/2011 12:39:15 PM----
com.sap.bi.et.analyzer.api.BExApplication+BExConnectionLostException: CPIC-CALL: 'CMRCV : rc=20
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner '10.1.9.126:3320' broken
TIME Thu Mar 03 12:39:14 2011
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -6
MODULE nixxi.cpp
LINE 5087
DETAIL NiIRead: P=10.1.9.126:3320; L=0.0.0.0:2225
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 6
at com.sap.bi.et.analyzer.api.BExApplication.Process(BExParameter iParameter)
at com.sap.bi.et.analyzer.addin.BExExcelApplication.Process(BExParameter iParameter)
CPIC-CALL: 'CMRCV : rc=20
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner '10.1.9.126:3320' broken
TIME Thu Mar 03 12:39:14 2011
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -6
MODULE nixxi.cpp
LINE 5087
DETAIL NiIRead: P=10.1.9.126:3320; L=0.0.0.0:2225
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 6
at com.sap.bi.et.analyzer.api.BExApplication.Process(BExParameter iParameter)
at com.sap.bi.et.analyzer.addin.BExExcelApplication.Process(BExParameter iParameter)
Brgds,
OlivierHello Suman,
Check the table rszglobv for this variable - ZCONLEH.
If it is available there then see which infoobject it belongs to and then look for that in the query designer. May be resaving the query solves the issue.
If the variable is not available in the table, then it seems that the variable is lost and you might have to recreate it for keeping the semantics of the query the same as it was before the upgrade.
Regards,
Shweta -
Error When Run ABAP Query in Different Client
Hi ABAPers,
Currently I develop ABAP Query using SQ01 / SQ02 / SQ03.
Everything goes well, and I have already test that the query work well. The query can be execute and show the result correctly.
My peer in same SAP system, but different client, run the same query. As I know that query is same with ABAP program which is client independent, can be execute across client. But then the runtime error show up.
The error said that
Exception condition "NO_POSITION_FOUND" raised.
Can anybody told me what's happened here, and how can I resolve this problem?
Thank you in advance
Regards
HadiHi,
Since you are testing it in other client,i think due to data inconsistency you are getting that error.
Try to check the corresponding tables in both clients and can verify.
Cheers,
KK. -
FRM-40208 - CAN NOT UPDATE, WHEN RUNNING IN QUERY MODE
Hi all,
I am calling a form in a query mode and when the query is performed in the called form, i am trying to update a field, but i get a error message frm-40208. I have checked my block properties insert_allowed, update_allowed and delete_allowed are set to yes and in the item properties the QUER ONLY is set to NO. can any 1 please help in this matter.
Regards,
Riteshhow do you do an enter query? is it code somewhere in the pre-form or pre-block automatically using the enter_query?
Maybe you are looking for
-
HT204074 Multiple Apple IDs on one Mac
I have 2 different user accounts on my MacBook Air. Both users have their own iTunes Library with their own AppleID. Is my understanding correct that it is not possible to use both accounts independently as only one Apple ID can "use" the Mac at a ti
-
Update Power Mac G3 from OS 9.2 to OSX 10.4?
Hello all, So I just received an old Powermac G3 from a friend of mine running OS 9.2. I am trying to get the computer a little more up-to-date so that I can use the computer as a file server. When I went to put my 10.4 install disk in, it told me th
-
Error while running runcluvfy.sh in 11gR2 on AIX
Hello I am trying to install 11gR2 on AIX6.1.While executing runcluvfy.sh utility for H/w & OS configuration check,I am getting below error in private interconnect. sh runcluvfy.sh stage -pre crsinst -n node1,node2 Performing post-checks for hardware
-
Unreadable Files Error when Importing
Hi - I get an "unreadable files" error when trying to import from my iPhoto Library folder. I've read the other postings, and it sounds as though I should not have moved files directly into this folder. If that's the case, can someone please tell me
-
Hi, I would like to query BW from XI in a synch call. What is the best way in terms of performance to implement it?