When running Firefox in Kaspersky security mode, MOZCRT19.dll not found
I use Kaspersky Internet Security which has an extra security feature. When using that additional feature and I attempt to open Firefox, I get an error message saying that MOZCRT19.dll cannot be located.
Try to ask advice at the Kaspersky forum.
*http://forum.kaspersky.com/
Similar Messages
-
Unable to interact with Flash content when running Firefox with restricted user
When running Firefox with limited Windows user on Windows XP the Flash elements are displayed, the content that is set to auto-play does so even, but the flash area doesn't receive any mouse input: e.g. when I right click in the area instead of the flash context menu I get the browser context menu as if the flash plug-in wasn't even there. The exact same page on the exact same computer but with Administrator user works as expected: can press buttons, interact with flash controls and the context menu upon right-click is of course the flash one. This behavior occurs even if I disable all add-ons.
Try uninstalling your sound card driver in Device Manager and reboot your PC.
-
When running firefox periodically it will use 99% of my cpu for no apparent reason.
As I said when running firefox it periodically uses 99% of my cpu and freezes the computer until it drops down below the 99% usage.
I'm on Windows 7, but a lot of things would apply to any system, it just that the system related stuff you may have to find out for yourself where it is.
Some posted recently and I saw they had Picassa, that's a lovely one it will index every picture on your harddrive even thumbnails and pictures in cache and temporary files. I got rid of that. Now for the things I had to take care of on this system.
'''Windows 7''' Home Premium<br>Ghostwriters, scheduled tasks ☷☷☷☷
*http://dmcritchie.mvps.org/windows-7/win7.htm#ghosts
The first part are allowed scheduled task, you need to know when then occur, after that is Windows indexing -- turn if off it is one of the worst offenders, it faster to just search your drives and searching has less impact on your system than useless indexing, and then some things in '''Firefox''' (article header says it may be out of date -- unlikely though
'''Firefox things''' to turn off media indexing, page refresh.
:http://dmcritchie.mvps.org/firefox/firefox-problems.htm#autoplay
'''media.autoplay.enabled''' user set Boolean set to false in about:config
:'''browser.sessionstore.max_concurrent_tabs''' to 0 in about:config ''(sometimes set default of 3, which defeats whole purpose of seeting it to 0 as a replacement for the "bartab" extension)''
:(do not use the "Stop Autoplay" extension, which stops picture from showing)
Looks like I'm not stopping autorefresh though, might be related to my expectations of any change on a local drive to cause an immediate refresh but can't find such an option to refresh only local drive.
'''Problematic extensions'''
:http://kb.mozillazine.org/Problematic_extensions
Look carefully through the problematic extensions, avoid phone applications such as Skype which share your band width with other in order to function, only keep such applications up when needed. Do not install the Skype extension
Avoid third party toolbars and extensions to tie into other running applications. Don't install timers in Firefox, as standalone application would be better. -
Fire Fox v3.6.3 will not run in normal or safe mode, also will not uninstall
FF v 3.6.3 for windows vista will not open and run in normal or safe mode, FF will not uninstall from folder or add/remove programs, tried to reinstall from Mozilla site did not work. Internet Explorer also will not run and crashes. I am using Safari it runs fine no problems. FF has been crashing for about a week unexpectedly but will reopen and run, but will not run at all now..?
== Crash ID(s) ==
ID: e3f78c3f-b182-44a9-8ef6-ca84c2100617
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/531.21.8 (KHTML, like Gecko) Version/4.0.4 Safari/531.21.10From the Crash ID information, it seems this is related to the AVG antivirus, version 8.5. If possible, please try updating you AVG installation (the program) to latest version; according to [https://bugzilla.mozilla.org/show_bug.cgi?id=547210 Bug 547210] AVG has released an update May 17. to AVG version 9 that should fix this problem.
Please let us know if this fixes the problem with Firefox crashing. -
Downloaded latest version and now firefox won't open "mozjs.dll not found"?
I downloaded version of firefox (5.0?), and when the computer restarted firefox won't open. I get a "mozjs.dll not found".
Help?'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart. -
While running servlets getting errors 404 or 505 resource not found
Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.;*
import javax.servlet.http.;*
import java.io.;*
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
*"<h1 align=center>HF\'s Chapter1 Servlet </h1>"*
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
*<!DOCTYPE web-app*
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
*"http://java.sun.com/dtd/web-app_2_3.dtd">*
*<web-app>*
*<display-name>Hello World Web Application</display-name>*
*<description>Test Servlet</description>*
*<servlet>*
*<servlet-name>ServExamp</servlet-name>*
*<servlet-class>Sai.ServExamp</servlet-class>*
*</servlet>*
*<servlet-mapping>*
*<servlet-name>ServExamp</servlet-name>*
*<url-pattern>/Suresh</url-pattern>*
*</servlet-mapping>*
*</web-app>*
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
*1) clicked on deployments, then navigated to "Web Application Modules" .*
*2) Clicked "Deploy new Web Application Module"*
*3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a valid web application.*
*4) I Clicked that radio button and clicked "Target Module".*
*5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"*
I clicked Deploy.
*6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.*
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
*7)Instead,I added my servlet on to the URL it provided.*
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------nammathamizhan wrote:
Hi all,
I'm novice to J2EE.
You're also a novice to this forum.
First, turn off the bold font.
Second, post your question once and only once to a single forum. You only waited an hour before reposting your question. That's not the way this works. Asking your question multiple times will not increase the likelihood that you''ll get an answer. As a matter of fact, you're guaranteed nothing at all. Give it your best effort and hope for success. This isn't a paid consultancy - we're volunteers.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
If you're correct, and it's deployed, that would suggest that the URL you gave is incorrect.
>
Now let me elaborate what i've done till now.Good info - almost too much.
% -
Hello!
I need to create a function that could allow Application users to change their passwords.I use a JAZN authentication in the application. So, I decided to analyze contents of the CreateJaznUser application first. But compilation of this application breaks by the next error:
import oracle.security.jazn.oc4j.JAZNUserManager not found
Could you advise me, what an additional libraries I must add to the CreateJaznUser application and where can I download them from?
Thanks in advance.OID 3.0.1.0 is the latest product release to public. I did add the Install data to allow it to work. I see the data in OID but when I connect with jazn I get error.
java -jar jazn.jar -shell
JAZN:> ls
realms policy
JAZN:> cd realms
JAZN:> ls
String index out of range: 32
JAZN:> cd ../policy
JAZN:> ls
JAZN:> exit
JAZN:>
It does not error on policy dirictory but it does on the realm side. If I watch the tcp packets it is working. -
Hi !
I have installed Java 2( j2se 1.4.1_02) and when i execute java it gives
Error: realpath ("//java") not found
Error: could not find libjava.so
Error: could not find Java 2 Runtime Environment
I have been trying for the past 3 days to get this setup working, but no success. Have made the LD_LIBRARY_PATH and PATH to have the required values. Is there anything else that need to be done.
Can anyone help please?
Thanks
RajiWhich platform is it? Java version "1.4.1_02" works fine for me on my Linux. Maybe these pieces of information are of some help.
$ uname -a
Linux bijpc 2.4.19-4GB #1 Wed Sep 25 18:58:10 UTC 2002 i686 unknown
$ java -version
java version "1.4.1_02"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_02-b06)
Java HotSpot(TM) Client VM (build 1.4.1_02-b06, mixed mode)
$ type java
java is hashed (/usr/lib/jdk1.4.1_02/bin/java)
$ file /usr/lib/jdk1.4.1_02/bin/java
/usr/lib/jdk1.4.1_02/bin/java: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), stripped
$ ldd /usr/lib/jdk1.4.1_02/bin/java
libpthread.so.0 => /lib/libpthread.so.0 (0x40025000)
libdl.so.2 => /lib/libdl.so.2 (0x4003a000)
libc.so.6 => /lib/libc.so.6 (0x4003d000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
$ find /usr/lib/jdk1.4.1_02 -name 'libjava*so'
/usr/lib/jdk1.4.1_02/jre/lib/i386/libjava.so
/usr/lib/jdk1.4.1_02/jre/lib/i386/libjavaplugin_jni.so
/usr/lib/jdk1.4.1_02/jre/plugin/i386/ns600/libjavaplugin_oji.so
/usr/lib/jdk1.4.1_02/jre/plugin/i386/ns610/libjavaplugin_oji.so -
When I try to open iTunes from my PC, I get a message "aps daemon.exe MSVCR80.dll not found reinstall"
I have redownloaded iTunes and still get the same message. It has to do with my Windows Vista in some way? I cannot sync my iPad2, iOS 7.0.4 with my PC.
Can anyone help me? I don't want to lose the thousand and one things I've bought.Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
i have downloaded the trail version of CS6 and run that. it shows the error ' entry point not found"
Your computer does not meet the system requirements. Refer to the tech specs on the product page.
Mylenium -
Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.
Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
When down loading new version i keep getting MSVCR80.dll not found and I now have no itunes
I have just up dated my i tunes and whenever i try to start it i get this essage : MSVCR80.dll not found and itunes refuses to open. i have tried re-installing etc but nothing works. Any ideas?
muzzGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
getting a error message when i try to open i tunes, file msvcr80.dll not found. Have tried to reinstall i tunes but receive another error message when thats done down loading it reads service apple mobil device failed to start, verify that you have sufficent priviliges to start system. Any ideas?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
can someone tell me how many seconds the cross fade is when running your Ipod 6th Gen nano in that mode? I teach spin class and want to know how much time I'm losing in that mode.
You aren't losing any time in that mode, but I believe it is a 10 second fade out/fade in.
-
BDC-Not getting inserted when run in 'Display errors- (E)' mode
Hi,
I am doing a BDC for FS00 transaction through Call transaction method. The data is getting inserted into the table when i run the BDC program screen by screen through 'Display all screens - (A)' mode and is not getting inserted into the table when i run the BDC program through 'Display errors- (E)' mode.
What could be the reason for it?If you have defined a non-existing screen or field, and error will rise and the transaction will be stoped....
When your working on 'A' mode, you need to perform an extra "Enter" button press to get rid of that problem....So you better check your Batch catalog and add some "Enter's" when need it -;)
Greetings,
Blag.
Maybe you are looking for
-
Mutual Changes of sales document in CRM and ECC
HI 1.We have a scenario as we are creating orders in CRM, but want to change the same in ECC. Also whatever changes we do in ECC should flow back to CRM. 2.Similarly, if we create sales order in ECC, it should be changeable in CRM and the corresponsi
-
I have a imac that I back up to an external hard drive. I have a PC on which I've installed Bonjour for Windows to print wirelessly through my Mac. Can I transfer my iphoto library to my PC?
-
Greater than equal symbol are coming across as question mark
Hi: Greater than equal symbols and Less than equal symbols are coming across as question marks in Jasper Reports. Do you have any suggestions of how to solve this?
-
Currency conversion does OBIEE do it by default
Hi, Newbie in this area. We are trying to build a report/analysis using OBIEE and want to have a column which displays let us say price in different currencies. The user changes the currency and the value changes. Now after reading a bit noticed that
-
HT1657 is it possible to rent a movie and play it on a TV without Apple TV?
wanted to rent a movie and watch in a big screen, but don't have apple tv. i do have the HDMI adapter for the miniport. it is possible to use?