When saving file to remote server it saves to wrong site

I'm frustrated try to save a file to the remote server. I
connect to the server OK. Then I open an html document, make my
changes and save it. But instead of saving it where the file came
from it connects to a different on of my sites. Ack!! Even when I
try to "save as" it will connect to the one I want and then connect
to wrong one to upload the file.

have you checked your site definition to make sure you have
the correct
site specified in the remote info?
cntrysigns wrote:
>
> I'm frustrated try to save a file to the remote server.
I connect to the
> server OK. Then I open an html document, make my changes
and save it. But
> instead of saving it where the file came from it
connects to a different on of
> my sites. Ack!! Even when I try to "save as" it will
connect to the one I want
> and then connect to wrong one to upload the file.
>

Similar Messages

Fonts changed to Unix files when saved to a remote server

Hi all, I read an archived thread regarding this, but not sure if my situation is related somehow. The issues others have had was that their font files were converted to Unix files at 0KB, when stuffed.
My issue is I backed up fonts (PS and TT) from my Mac to a remote server (PC based). When that server is accessed by Mac users, some saw the file as a Unix file at 0KB. However, there were some (including myself) that saw the actual font file.
That was a few months ago, we've retired that server since, but before doing so I transferred all the fonts to a new server. It's now a raid drive run off a Mac Xserve. After the transfer, I checked to see if the fonts were still okay, and they were showing full Mac file (no Unix). I didn't go into the new server for a couple of months, but when I did I noticed that all the fonts had been changed to Unix files. Some were at 8KB, others at 60KB. But no 0KB files. +Note: because the initial transfers was a success, the original files from the old server were deleted along with it. So there is no way of retrieving the original files. As well, were were running 10.4.10 with the original server and files. Switched to 10.5.x when files were transferred to the new server.+
I've tried the tips here (using the Terminal method and the FileUtilsCM script) http://discussions.apple.com/message.jspa?messageID=6041364 but to no avail. I'd hate to think these fonts are scrap. As they were all purchased (and there's a whole load of them). Any input in saving these files would be of great help.
Thanks in advance.

The real font information is stored in a resource fork, not the data fork fo the file. Depending type type of file system you copied them to, how you copied them, and what method you are using to look at them, you may not be seeing the resource fork.
You can see more detail about files usng a Terminal command such as
ls -leaO@ file
If there is a resource fork, it will be displayed.
If the file system was not a Mac OS X external file system, then you might want to look for a file with a similar name only starting with a leading period to make it invisible to the Finder
ls -leaO@ /the/directory/with/your/fonts

Photoshop crashes when saving file to a server on 10.4.6.

http://www.adobe.com/support/techdocs/333037.html

have you checked your site definition to make sure you have
the correct
site specified in the remote info?
cntrysigns wrote:
>
> I'm frustrated try to save a file to the remote server.
I connect to the
> server OK. Then I open an html document, make my changes
and save it. But
> instead of saving it where the file came from it
connects to a different on of
> my sites. Ack!! Even when I try to "save as" it will
connect to the one I want
> and then connect to wrong one to upload the file.
>

When saving file receive error "Couldn't save image. droppedImage.tiff"

Hello, hoping you can help me out.
I have a document with a lot of images that I dragged into it. None of the images actually exist on my drive. I thought it would just save it all but it's not. Any ideas? I don't want to create all of these images by hand, there's a ton.
Thank you in advance.
Message was edited by: KaylaF

I just started noticing this error as well. Is it a file size thing (I'm importing movies, but that's never been a problem before). Whatever it is it's a deal killer for Lion (if that's the issue, or Keynote, sadly, if that's the issue).

Photoshop CS6 – Error When Saving Files

When saving files using Photoshop CS6 I randomly receive an error message that states 'Could not save image_name.tif' because of a program error'. Sometimes a save-as works but not guaranteed. The file is being saved to a mounted server volume and sometimes the only way to get the file on the server is to save to the desktop and then copy the file back to the server. The error message does not appear on any other Adobe applications, just Photoshop.

Moved from the Creative Cloud to the Photoshop forum. They will be able to help you here.

Script to require user to update comments in info window when saving file?

I work in a print production department where many different people are modifying files (InDesign, photoshop, Illustrator, etc.) on a central network every day. Users copy the file they want to work on to their desktop, modify it, and then replace the original on the network with the modified version.
It can happen, though, that either someone doesn't save their work back to the network--or the opposite, where someone inadvertently overwrites a file on the network with a version that isn't as recent. Unfortunately, the information window (the one that you can access by right-clicking a file or, in the Finder column view, clicking on the "Get Info" button) doesn't identify the most recent user of a file--just the date created, modified, last opened, etc. When files on the server are incorrect for whatever reason, it can be difficult to figure out what happened. This info can be entered manually in the "Comments" field, but users either forget or are too busy to add that step into their routine.
Can a script to written that will prompt/require them to add at least their initials, date last changed, and for what reason, in the comments field before saving? It would be ideal if the script could somehow prompt users to do this only when saving files to the network--or, failing that, at least only prompt them once if they're just saving a file they've already dragged to their desktop back to the desktop for backup reasons.
Is this possible? Truly, I know almost nothing about AppleScript, but someone here was really, really helpful last week with a file-comparison script that has saved lives already. I'm trying to learn more, but meanwhile, I thought I'd ask.
Thank you so much in advance!

I can't see any way of doing this.
It would require hooks into every application's Save dialog, which just isn't an option.
The only possible way it might work is a folder action on the network folder that somehow adds the username to the comments field of any file as it's transferred to the server. Not quite the same thing, and I've no idea how folder actions work in a multi-user environment but it might be worth a try.
The problem may be that every users' system will see the new file getting added, so every system tries to fire off the folder action, with unpredictable results.

Modified Date is off by 5 hours when saving files to External One Touch 4

Have Googled and searched forums here but can't find an answer anywhere, but please do direct me if I've just missed it...
I back up files via Linksys wireless server to a Sentry Maxtor One Touch 4 external hard drive (originally used with PC) without problem except for the timestamp. Modified Date is always exactly 5 hours earlier. For example, if I save a file to my Mac desktop and to the external hard drive at 7:05pm, then the desktop file properties will show a modified date of 7:05pm (accurate), but the external hard drive file will show 2:05pm (off by 5 hours).
Any ideas?

Thanks for the welcome and your speedy responses, Michael and Joey. Although my technical skills are limited, I'm sure the drive is still NTFS as I did nothing to update it from use with our PC since we still have one of those in the house using the hard drive (unfortunate, I know).
However, I did just try a cheat with the time setting on the Linksys wireless server. Although I had confirmed it was correct before, it hit me that maybe I could change it to GMT-England and that would result in correct timestamping. It worked! Of course, the PC will probably be off now when saving files, but I haven't checked that yet. Any other issues/problems you think I may encounter by doing this?
If not, then I can live with the cheat. Thanks again!

Can't See Files On Remote Server

Wondering if anyone has a fix for not seeing files
on remote server... It's even got my host stumped. I have a fairly
large static site which I CAN SEE files via my host's "File
Manager" 90 Folders 3090 Files 52,336.74KB
But I cannot see files and folders when connected FTP via
IPSwitch or Dreamweaver 8.
I have followed IPSwitch's troubleshooting steps for this
issue, with no resolve. Emailed them a week ago, still no reply.
I have other sites at the same host (sub-domains of the site
I cannot see), and thoise subdomain sites files and folders show up
fine. With the primary site, even though I cannot "see" the files
and folders, I can still ftp to and from the server (get & put)
from DW or IPSwitch...

No... I am looking at the correct folders, etc. The host is a
commercial host for Fortune 500's, I fairly confident in their
abilities. They think it might have something to do with long file
names. There is one clue, in that at one time I could view the
files and folders. Since that time it is possible I added a page
with a file name that is too long and is causing the issue. I will
probbaly need to temporarily delete these long file name pages to
see if it's the issue or not. I just thought someone here may have
experienced this. Not being able to view files and folders (even
though you can connect and transfer okay) is a pretty common
troubleshooting topic at the FTP software companies.
quote:
Originally posted by:
Newsgroup User
It's time to change hosts, if they can't figure this one out.
You must be
looking at the wrong folder with DW/Ipswitch....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DJ Website Designer" <[email protected]>
wrote in message
news:floqjp$rl2$[email protected]..
>
Wondering if anyone has a fix for not seeing files
on remote
> server... It's even got my host stumped. I have a fairly
large static site
> which I CAN SEE files via my host's "File Manager" 90
Folders 3090 Files
> 52,336.74KB
>
> But I cannot see files and folders when connected FTP
via IPSwitch or
> Dreamweaver 8.
>
> I have followed IPSwitch's troubleshooting steps for
this issue, with no
> resolve. Emailed them a week ago, still no reply.
>
> I have other sites at the same host (sub-domains of the
site I cannot
> see),
> and thoise subdomain sites files and folders show up
fine. With the
> primary
> site, even though I cannot "see" the files and folders,
I can still ftp to
> and
> from the server (get & put) from DW or IPSwitch...
>

When saving files from the internet, why doesn't Firefox 'know' to put .jpg files in "Photos" and pdf files in "Documents"?

When saving files from the internet, why doesn't Firefox 'know' to put .jpg files in "Photos" and pdf files in "Documents"? IE always saved photos in the "Photos" file and documents in the "Documents" file. Firefox makes me choose every time. Very annoying.

How about if Firefox is programmed like IE in this ONE thing...
When saving files from internet sources, if the file ends in a typical photo extension such as .jpg, .bmp, .tif etc. it defaults to save it in your PHOTOS folder.
When saving anything like a .doc, .pdf etc. it defaults to save it to your DOCUMENTS.
You could still change it to 'desktop' if that if really where you want all your photos and documents... or some other folder that you decide, but DEFAULTS to the LOGICAL folder.
I have carpal tunnel SO bad that even typing this suggestion is painful and having to make the extra click along with moving the mouse EVERY time I want to save something is painful.
ALSO, I shouldn't need a bunch of ADDONS to accomplish this. I tried downloading one and it did nothing. The problem still exists.

HOw to delete files from remote server?

Hi,
I want to delete files from a directory on remote server.
I use the following command to delete on current server:
find $srcdir -mtime +90 -name "COR*.txt" -exec rm -f {} \;
Now, how can I delete files from remote server ?
Thanks!
Yogini

Some possible options:
1. There exists SSH implementation for Windows.
2. You can make a workaround. You can setup share for specific/wanted directory.
Then you can mount it on Linux machine and execute command localy and delete files "localy" in mounted directory.
3. You can setup FTP server on Windows machine and do that remotely via FTP commands.

Put files onto Remote Server?

I am connected to the remote server and have tried repeatedly to put files onto remote server. It either says successful or not transferred and the new page never gets put up. What am I doing wrong? I have put files on my remote server before, but all of a sudden it is not working for me.

This is what it is saying..
Started: 7/22/2013 3:21 PM
Website\5K_run08.html - same - not transferred
Website\images\nav_home_on.gif - same - not transferred
Website\images\nav_info_on.gif - same - not transferred
Website\images\nav_photos_on.gif - same - not transferred
Website\images\nav_members_on.gif - same - not transferred
Website\images\nav_minutes_on.gif - same - not transferred
Website\images\nav_faq_on.gif - same - not transferred
Website\images\nav_home_off.gif - same - not transferred
Website\images\nav_info_off.gif - same - not transferred
Website\images\nav_photos_off.gif - same - not transferred
Website\images\nav_members_off.gif - same - not transferred
Website\images\nav_minutes_off.gif - same - not transferred
Website\images\nav_faq_off.gif - same - not transferred
Website\images\header.jpg - same - not transferred
Website\images\button_friend.jpg - same - not transferred
Website\images\run_button_blue.jpg - same - not transferred
Website\images\committee_button.jpg - same - not transferred
Website\images\map_button3_blue.jpg - same - not transferred
Website\images\links_button_blue.jpg - same - not transferred
File activity complete.
Files skipped: 19
Finished: 7/22/2013 3:21 PM

How To read/write file on remote server in java

Hi All,
How To read/write file on remote server in java? I mean using URL - http://www.xyz.com can I right file to that perticular server.
Thanks in advance

If your server support a means of uploading files you can.
A popular means is [http://en.wikipedia.org/wiki/WebDAV]
However, by default web server don't allow you upload files, its usually something you need to configure or install.
I suggest you have a look at your web servers documentation.

Can I enable autocomplete when saving files?

I'm a Mac newbie. One of the Windows features I miss is autocomple when saving files. I tend to work with .jpeg files and name them sequentially, and Windows would help me out by bringing up similar file names. I could then just change the sequence number to make a new file. Is there any way to enable or add this type of feature in 10.6?

Hi,
I have done that with the ftp adapter. In the .xsl file I wrote the following after the <xsl:stylesheet version="1.0" ....> tag:
<xsl:variable name="INFILENAME" select="ehdr:getRequestHeader('/fhdr:InboundFTPHeaderType/fhdr:fileName','fhdr=http://xmlns.oracle.com/pcbpel/adapter/ftp/;')"/>
<xsl:template match="/">
<xsl:variable name="OUTFILENAME"
select="ehdr:setOutboundHeader('/fhdr:OutboundFileHeaderType/fhdr:fileName', $INFILENAME, 'fhdr=http://xmlns.oracle.com/pcbpel/adapter/file/;')"/>
<opaque:opaqueElement>
<xsl:value-of select="/opaque:opaqueElement"/>
</opaque:opaqueElement>
</xsl:template>
</xsl:stylesheet>
To use this with the file adapter, you would have to wirte file where is written ftp.
Hope this helps,
Zaloa

Office 2013 hangs when saving files to local profile locations on Windows 2012 server

We installed Office 2013 a few weeks ago instead of Office 2003 on a Windows 2012 standard terminal server. We installed the last updates and Office is up-to-date now, but we experience problems with saving word, excel and powerpoint documents when we start
a new/clean document. It's not possible to save our documents to the local profile (desktop, documents etc.), but it's no problem to save our stuff to a network share on a different server.
Word is not responding after pressing save or save as and after a few seconds we see the 'microsoft is looking for a solution and will restart microsoft word'.
We did a complete reinstall of Office 2013 and removed the old installation with the removal tool from the microsoft website, without luck. We have the same saving issues with Office 2010, so it's not an Office 2013 issue.
We were looking in the access/rights on the terminal server, because we thought that it was an access/rights issue. But unfortunately we have the same problem with an domain admin user.
I tried to disable DEP and my AVG 2012 antivirus, but this steps are also not the issue.
I'm looking for a solution and i'm working on this case for a few days now. It gives me a headache when i'm thinking about a clean installation of this server. So please contact me when you have a solution or a tip to solve this problems!
Thanks!

Hi,
In regarding of the issue, it may be caused a lot of reasons. Please check to see whether the following link is helpful:
https://support.microsoft.com/kb/313937/en-gb
http://support.microsoft.com/kb/921541/en-gb?p=1
http://support.microsoft.com/kb/271513
Then Office hang when saving the file also may be caused by a printer installation.
Check to see the following link:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/04/12/excel-hangs-or-becomes-unresponsive-when-saving-or-closing-a-workbook.aspx
If you could upload the event log, I'll do deeply
research.
Thanks,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

I can't download firefox 4. I only get the option of "save file" or "cancel". When saving file nothing happens. Still doesn't download.

I click on 'download', then the box appears asking whether I want to save file or cancel. Usually, when downloading, the option of "run file" is given, but not in this case.

Click on Save File. Then click on the Tools menu at the top of the page and click on Downloads. When the file finishes downloading, double click it to being the installation.

When saving file to remote server it saves to wrong site

Similar Messages

Maybe you are looking for