When saving sales order Error determining local currency: ER type 'M' date
Hi experts
we have created new sales area for intercompany billing process. we are doing testing for this.
Update was terminated
after saviing sales order express document update was terminated received from author
sales order Error Info... M2 802: Error determining local currency: ER type 'M' date 02.08.2011.
i need your input
thanks
Dear Manoj Verma,
Check the pricing date of the sales order.
Check the valid from date for the currency types/exchange rate type M in OB08
Now check whether the pricing date in sales order is before the valid from date in OB08.
If so , make the valid from date in OB08 as the pricing date in sales order in OB08 and then save.
Thanks & Regards,
Hegal K Charles
Similar Messages
-
Error while saving the service order "Error determining Local currency"
Hi Gurus,
I am facing a strange proble, while adding components to my service order. The system throws error " Error determining local currency: ER type 'M' date 05.11.2007 from SGD to RMB RC 4 ".
the customer is from singapore and am issuing the material from local plant (every where SGD is maintianed as the currency). We have maintained the exchange rate also between these currencies.
Can anybody throw some light on this issue????
PraseClosed the thread...
-
I need a Badi that is triggered when saving Sales order in both Va01 and Va
Hi
I need a Badi that is triggered when saving Sales order in both Va01 and Va02
I tried with the following BADI's
BADI : BADI_SD_SALES
Implementation : /BEV1/SR_SALES_ORD_1
Method SAVE_DOCUMENT
Now when i want to put my peice of code in this (SAVE_DOCUMENT) method.
It is asking for Access key. Which i do not have.
Should i create a implementation and then create a method and then put my code there?
Anybody plz help.You will probably not find a BADI to suit your needs. However if you look at include program MV45AFZZ you should find two subroutines: USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT. You can put the code you need directly into these subroutines. If these have not been changed yet on your system, you will need an access key to make these changes.
Please read the documentation in the header of the subroutines for furtner information on when they are called.
Best Regards,
Chris H. -
Direct production order when saving sales order.
Hi,
How to create a production order from sales order.ie. When a sales order is saved production order automatically created.
Thaks and regards
HarishHi
For the product that you need to have the production order once the sales order is saved
Maintain the planning strategy 82 Assembly processing w. production orders in material master / mrp 3 view
So once the sales order is created, system automatically do the bom explotion and availability check, routing in background and create the Prodcution order.
so in Md04, you can see the production order for you sales order qty. -
Error:G/L account missing when saving Sales order
Hi Guys,
I will appreciate your input on this.
Whenever I try to save a Standard order for a particular material I get the error"G/L account missing. I have checked all the Account assigment settings and they are correct.
I faced this issue while creating an order for downpayments.This error occurs when we use the material of the kind "make to order".
RegardsHi Pvarinder,
First please check the customer account assignment group at your sales order header level and material account assignment group at your item level.
If they are ok then go to Environment->Analysis->Account determination
As you said the entries are ok in VKOA, so my guess is I think you have some condition type which is not getting the right G/L account.
Please check and revert with your findings.
Regards,
MT -
Update Customer's Credit Exposure amount when saving sales order
Hi All,
My requirement is to update the Credit Exposure amount(KNKK-SKFOR) of the Payer based on the open items for the payer when saving a sales order.
I checked the UserExit USER_CREDIT_CHECK2 however this is not working when I am trying to update the KNKK-SKFOR value in this userexit.
Please help.
Thanks.Dear Debashish
As per my understanding, this is because the credit limit check is always applicable at 2 levels only i.e. Sales Order and Delivery.
u r talking about Open Billing Doc and Open Items, but this is also covered within Open Sales Orders and Deliveries, isn't it?
Hope this will help u. -
User exit not active when saving sales orders
while creating a sales order (VA01) i need to update the storage location based on division . for this the badis and user exits are not triggering while creating a sales order for the above requirement
any solution........
<removed by moderator>
thanks in advance..
<Subject edited. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]>
Edited by: Mike Pokraka on Aug 7, 2008 8:38 AMJVP,
MV45AFZZ this is the include which is trigger while creating SO.
use FORM USEREXIT_FIELD_MODIFICATION to write code.
your code look like if sy-tcode = 'VA01'.
update field.
endif.
Amit. -
"Error in determining Local currency" while saving the service order.
Hi Gurus,
I am facing a strange proble, while adding components to my service order. The system throws error " Error determining local currency: ER type 'M' date 05.11.2007 from SGD to RMB RC 4 ".
the customer is from singapore and am issuing the material from local plant (every where SGD is maintianed as the currency). We have maintained the exchange rate also between these currencies.
Can anybody throw some light on this issue????
PraseClosed the thread...
-
Run Time Error on Saving Sales Order
Hello,
We are facing problem when saving sales order. When order is created and save button is pressed, it saves sales order and gives Order Number. But while saving the order during update it gives dump due to Data duplication in VBFA while inserting data to VBFA table
Looking at ST22 log this error is in form VBFA_BEARBEATEN
Kindly guide.
Thanx in advance.
RegardsCheck the Sales Order Number Range.
It seems either the Number Range is exhausted (completed) or a document with same number is already created in system in past...
Hope this helps,
Thanks,
Jignesh Mehta -
Message No V 0102 (Sales Order Error During Saving)
We are using SAP ECC 6 version and the client is related to Beverage Industry.
Problem:
The scenario is this that we created a Sales Order. In the Sales Order we have entered let say 20 items and the item have sub item as well. We are using BOM usage 5. Once the order is confirmed the user creates the Delivery Order but doesnt Post the Good Issue.
Now the requirement is that the user wants to change and delete some item in sales order.
For this first we amend the delivery order and then we change the sales order according the amendments made in Delivery Order.
In this scenario we also want to completely delete the Main item but as its default that the Bom item will be deleted with the main but we want to enter the sub item again in the order because its the process requirement.
Now when I make all the necessary changes in Delivery Order and Sales Order Respectively System saves the Delivery order with the changes values but gives an error message after Saving the Sales Order and doesnt update the Sales Order as well
Attached are the Screen Shot of Sales Order Error Screen.
Note: This Error comes randomlyRefer OSS 740280
-
Error while saving sales order
Hi I am encountering below error message while saving sales order:
Warehouse
Specify export data in material master
Then I go to material master to check foreign trade export tab, and I had maintained commodity code export group, country of origin and region of origin, what did I miss? Help.Hi,
Check whether you have activated legal control data for the Sales Order type configuration in Foreign Trade.
If the Order type is activated then the following error message can pop up unless you maintain in material master.
See whether export legal control data is activated or not for the order type.
In IMG Sales and Distribution>Foreign trade>Legal control section
Regards,
Saju.S -
Error message when updating Sales Orders
Hi Experts
Following an issue over the weekend when I was forced to perform a hard reset we are now experiencing error message when trying to update some sales orders.
This entry already exists in the following tables " ADO1 (ODBC - 2035) [Message 131 - 183]
it is not happening on all orders - i think only ones which were on the system prior to the reset.
We also use webtools and the B1SyncService seems to be causing the SAP B1 system to become unusable - following each attempt to sync there is an error in the event log:
Event Type: Error
Event Source: B1SynchService
Event Category: None
Event ID: 0
Date: 29/06/2009
Time: 13:42:38
User: N/A
Computer: SQL01
Description:
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
at netpoint.api.data.DataFunctions.ExecuteScalar(String SQL, String connectionstring)
at NetPoint.SynchSBO.SBOObjects.SBOUtility.SetCompany(Company TheCompany, SecurityTicket securityTicket)
at NetPoint.SynchSBO.Synch.SetCompany()
at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket)
at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket, Int32 pricinginterval)
at NetPoint.SynchService.NPSynchService.Synch(String profile, Mutex mutex)
at NetPoint.SynchService.NPSynchService.Main(String[] args)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
For now I have had to stop the SyncService to prevent B1 from becoming unusable (users are unable to start any AR module), but even after I have stopped the syncservice I still have the error when updating sales orders.
Regards
JonDear Johnny,
the error reported sounds like a DB Corruption. I would advise you to log a message to SAP Support including all the details in order to obtain the error message. It is also a good idea and it will speed up the process if you include some print screens showing exactly the error message.
Hope my reply helps you to solve the issue.
Regards,
Wesley Honorato -
Trigger an Idoc when a sale order is been opened in VA02 & saved
Hi Experts
I have a requirement to trigger an Idoc when a sale order is been opened in VA02 transaction and saved.
Now that I have attained the same through Message Control Settings and Nace out put type settings with Multiple Issuing.
Here in the Idoc will be triggered when the user makes any changes in the order based on the NAST table entry.
Now my requirement is that the Idoc has to be processed even if there is no changes made to the document when the user opens the sale order and clicks save.
This is the process been carried out to re-process the Idoc.
Now that the Idoc is triggered using the path ---> menu - extras -output - header- edit & save.
Now that the user need to process the Idoc by just opening the order in VA02 and click save.
How can this be attained ? is there any configuration for it ?
Or is it possible to handle the same in any of the user exit ?
the problem is the user exit save gets triggered only when there is any change in the document else it throws a msg " No changes made"Hi Niraj
Thanks for your Response.
Now that the output control works fine when there is any change made to the document.
Now that i need to configure such a way that the output control triggers even if there is no change to the document and save button is clicked.
Can U please elaborate how do i make settings in VOFM-> Output Control ?
Thanks
Sathish -
RE; when a sales order is posted error in Md04
When a sales order posted for 10 nos, the order shown in stock requirement list it is exhibiting the order for 120.Basically it is the integration problem despite that sd people claim it is the setting problem of pp or mm consultant. Can anybody clear my problem.
Edited by: Vachanala Rajasekhar on Dec 27, 2007 3:28 AMIf possible; kindly change the order qty to either 9 or 11 and then check the order qty proposed by the system.
Is this appearing for any particular material or a common error??
If for any particular material, u need to check the material master but first do some change in order qty and then see the behaviour
Please revert with your findings
Rgds -
Material Determination when creating Sales Order referencing Contract
Hi Experts,
Is ther any way to force material determination when creating a sales order with reference to a contract?
When I create a sales order from scratch, the material determinations works fine, but when the sales order is created referencing a contract, the material is copied from the contract without material determination.
I've checked control copy at item level, without sucess.
Thanks in advance,
Nuno.Hi Nuno,
Material determination is triggered by the material entered in the line item of the sales order.
You can carry out new Material determination/Product selection by copy cotrol configuration when creating with reference.
For your scenario of creating SO with reference to Contract the "product selection field should be blank" at item level copy control.
Blank --> Carry out new product selection
A --> Copy result of product selection
B --> like A, but the product selection is never cancelled afterwards
C --> Reserve
Hope this helps you.
Thanks
Arun
Maybe you are looking for
-
How can I search a file system and only return newer files?
Sorry the title didn't give me much room to work with. I'm writing a tool which needs to track all the files in an OS. What I'd like to do is make it so my program will only return files that have been modified/created since the last search to add to
-
hello in reports i have seen reason code 34952 but i do not see 34952 in predefined codes in ucce admin guide. this code not put in by us and does not show in registry keys. has any body seen 34952 before? we use cad 9 -aashish
-
Transcription Not Working in Trial of Premiere Pro CC 2014
I'm currently in a trial of adobe premiere pro cc 2014 and adobe media encoder. I am trying it specifically for the audio transcription and analysis featureset that final cut pro x lacks. However, when I go to the metalogging workspace, right click o
-
How do I find my product key code for CS5?
I bought CS5 2.5 years ago, unfortunately my school email deletes anything older than 6 months. I am looking to find my key codes so that I can transfer my CS5 over to my new laptop, can someone give me advice on this issue?
-
Updateable reports and checksums
Hi, I would like to know whether there is an easy way to understand the algorithm behind saving an updateable report. I spent a couple of hours messing around with columns that were saving state, or not, and that were visible according to the show ch