When scaling in page setup, 1st page prints correctly, but subsequent pages do not scale correctly/too large for the paper, parts of the text missing

When trying to print in Firefox, and when scaling the page size in page setup, the first page prints correctly, but subsequent pages do not scale correctly and are too large for the paper, with parts of the text are being cut off at the top and right. This is not fixed by checking or un-checking the "ignore scaling/shrink to fit page width" in the print window, or by changing the scaling%.
I am running Firefox 15.0.1, on Mac OS 10.5.8.
The same problem happens in the print preview and if I save the print as a .pdf
I have tried all the fixes in the how to's and others in various forums with no improvement.
This happens every time I try to print a document scaled up or down only in Firefox.

The 2nd page print scaling error has been an issue with Firefox on the Mac since 2011. People at Mozilla have not considered this a major problem. Try printing anything at less than 100% and you'll quickly see how every page after the first page being scaled wrong gets old real fast. The lack of a solution to this issue forced me long ago into using Safari as my primary browser. Good luck waiting until version 21 for a solution. Current release is 18.0.2.

Similar Messages

  • First page prints fine but subsequent pages expand beyond page border

    When I print a web page or selection that extends beyond one page, the first page prints fine, but the type size on subsequent pages is expanded so that the content extends beyond the right edge of the page. This never happened before I upgraded to Firefox 8, but now happens every time. My workaround is to print one page at a time -- very cumbersome.
    I'm printing to an HP Officejet Pro 8500. I have not changed printer settings since upgrading Firefox.

    Same problem here, but it doesn't seem to depend on the printer. Same thing happens when creating pdf files. It has started witha recent upgrade, not sure however whether this hasn't happened already with version 7. Currently I am using Firefox 8.0.1 on Mac OS X 10.6.8.

  • NoSquint properly resized web pages, but the upper taskbars are still too large--for instance, I can only the beginning of the URL. How to fix?

    After the latest Firefox version magnified everything, I used the NoSquint add-on (at 60%), which now makes web pages look as they did before. However, although the top two bars at the top of the screen are of normal size, the lower ones are still too large. The bar that contains the URL on the left and a Google search space on the right, for instance, can display only the first couple of letters of a URL (after the //).
    How do I make these bars look the way they used to? Thanks.

    Hi Anne, there is a setting in Firefox that controls the scaling of both the toolbar area and the content area. I'm guessing that you have your Windows font setting at 150%. In that case, I'm going to suggest you try to manually adjust the scaling in Firefox to 125% and then set NoSquint to 80%.
    Here we go!
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''pix''' and pause while the list is filtered
    (3) Double-click '''layout.css.devPixelsPerPx''' and change its value to '''1.25''' for the equivalent of 125% font size in Windows display settings.
    If you view a tab with an address bar and this is not quite right you can adjust it to a different value, such as 1.2 (120%) or 1.3 (130%).
    Please do not go lower than 1.0 or everything will start to get tiny.
    Once that looks right, you can go back into your NoSquint settings and up your global zoom level for content to a comfortable number.
    Can you get it the way you want?

  • I can't print from firefox. The paper feeds throught the printer but does not print. The same web pages will print when I use internet explorer. And the printer works fine with word, excell etc, just not with firefox.

    Whenever I try to print any page opened in firefox it will not print. The paper feeds through the computer, but does not pring.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Since installing update on 6/25, printing pdf pages OK, but bank account activity type is too large for the page. How do I shrink the type?

    Since installing Firefox v.3.6. 6 update on 6/25, printing bank statements in pdf format is still OK, but when I select the print option for my bank account activity the type is too large for the page. How do I shrink the type? We are running Windows XP.
    == This happened ==
    Every time Firefox opened
    == I installed Firefox update on 6/25

    Firefox doesn't display PDF files all by itself, it uses your PDF reader program which is also what handles the printing of that file type.
    As far as the large printed font from Firefox, open File > Page Setup and see what the '''Scale''' is set to. 100% is usually the best setting, but you might need to use a smaller setting.

  • When reading my downloaded paper the Safari page sometimes comes up and I have to press the Home button and start all over again but same thing happens.  I even made sure the the paper download was the first thing I did on my Ipad

    When reading my downloaded paper the Safari page sometimes comes up and I have to press the Home button and start all over again but same thing happens.  I even made sure the paper download was the first thing I did on my Ipad and that no other apps were open.

    Have you tried a Reset (No Data will be Lost)
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Page header plus page footer too large for the page in crystal report 2008.

    Hi,
    when we selecting pieview and print after entering paramter it's showing error: page header plus page footer too large for the page. error in File.rpt page header or page footer loanger than page. and it's not showing print layout format if i connect another printer it's showing layout designe. and some times it's showing letter formate and if i give print it's taking default lamdscape but we setup defual setup for printer 10*12 inches in particular printer.please guide me how we can solve this issues.
    regds,
    samapth

    This is a really hard post to read. See if you can take a bit of time to reword it, but one thing I do understand is that you are getting this error:
    page header plus page footer too large for the page.
    Typically, you can trust that if the error is thrown, it is true. E.g.; this is not one of those errors that says one thing, and means another. I suspect that you have some field(s) in the header(s) that grow, depending on the data. If there is too much data or the data is too long ( a text for example), the error will be thrown. To resolve this, see if placing the field(s) into a group footer / header will help.
    Ludek

  • Crystal Reports 9: Page Header plus Page Footer is too large for the page.

    Hi,
    I have a report that has the following sections.
    GH1
    GH2a
    GH2b - has a sub report
    GH2c - has another sub report
    GH3
    GH4
    GH5
    details - suppressed
    GF5 - suppressed
    GF4 - suppressed
    GF3 - suppressed
    GF2 - suppressed
    GF1 - suppressed
    The report works fine wehn I run it using Crystal Designer.I am using CR version 9.2.2.693.
    When I try to load the report in my application, I get the following error.
    Crystal Report Windows Forms Viewer
    Page Header plus Page Footer is too large for the page.Error in File rptName.rpt:
    Page header or footer longer than a page.
    OK  
    There are no 'suppress blank sections' option set in the sections where the sub-Reports are.
    I also tried setting the No Default Printer option.
    The report gets loaded from the application only when I set 'New Page after' in the sections where there are sub-Reports.
    I do not want to do this; Is there a workaround?
    Thank you.

    Can someone tell me if this problem is being worked on as it looks as thogh none of the problems regarding the message u2018Page Header plus Page Footer is too large for the pageu2019 have been addressed.
    We have several reports that were written in Crystal 7 (I think) and worked in Crystal 9 and X1R2 but now give the above error. We have tried jigging the report in line with the various suggestions but at best can get them to run through successfully with one lot of data and then fail on the second or subsequent pages when you vary the data or report format even slightly. We can report on every bit of data separately or in various combinations but not in others. Changing the bottom page margin by 0.01 cm can cause it to fail on page 7 instead of page 530 (for example). We certainly do not have large page headers (just over 2cm) or page footers (about 0.3cm). We do have some subreports in the details section but have used 'fit to section', added 'keep together', removed u2018keep togetheru2019 from just about everything we can (in desperation) but to no avail. We cannot see a pattern to what is happening. It would be encouraging to know that someone is actually working on this fault.

  • Exporting Page fails with ORA-1401 inserted value too large for column

    Hi Everyone,
    I have a client what is getting the following error when
    attempting to export a page using pageexp.cmd. A simple page
    works for them but there main page does not. Here is the error:
    Extracting Portal Page Data for Export...
    begin
    ERROR at line 1:
    ORA-01401: inserted value too large for column
    ORA-06512: at "PORTAL30.WWUTL_POB_EXPORT", line 660
    ORA-06512: at "PORTAL30.WWUTL_POB_EXPORT", line 889
    ORA-06512: at line 5
    Has anyone seen this before?
    Is there any way we can narrow down why this occurs?
    There is no logging on this export option and the stored
    procedures used are wrapped.
    Any ideas?
    Thanks
    Oracle Portal Version: 3.0.9.8.0

    we had this problem.
    We talked to some oracle person who said some portlets on a page had trouble exporting.
    Sure enough after we deleted all the portlets (one at a time to determine which one was giving us the problem. Turned out none of ours worked) the page exported and imported just fine.
    Hopefully this is being worked on...

  • Why is my internet search page gray?  I am able to search a topic, but the 'results' part of the screen is a medium gray color and it won't respond.  Any ideas?

    Why is my internet search page gray?  I am able to search a topic, but the 'results' part of the screen is a medium gray color and it won't respond.  Any ideas?

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • The main part of the safari page is grey and won't respond/can't type in any commands.  I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?

    The main part of the safari page is grey and won't respond/can't type in any commands.  I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?
    Help, please.

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • The toolbar in the adobe app that allows you to choose the brightness level and the page layout doesn't hide. Because of that, i of course am unable to read the top part of the page...[Android]

    The toolbar in the adobe app that allows you to choose the brightness level and the page layout doesn't hide. Because of that, i of course am unable to read the top part of the page. I cannot find anything in the settings that will make it go away. What do i do? I use Samsung Ace.

    What is the Acrobat DC version and the android version that you are running? You can find the Acrobat version here: How to find the Acrobat DC version installed on your Android device

  • Can I change the mustard colour of the top part of the firefox page?

    I've just installed Firefox 34.0 on a new windos 8.1. netbook. The top part of the firefox page - the part the tabs titles and the menu bar sit in - is a rather ugly mustard yellow - does anyone know how to change this colour? Thanks.

    Sorry about the sequence of this reply. Screenshot as requested - horrible isn't it!!
    Meanwhile it's solved thanks to Alan and Cor -el. Alan the problem existed from installation but I'll remove the banner thing just in case.
    Both of your various instructions did take me to 'themes' once I put my brain in gear and I've started to test different colour options..
    Many thanks to all
    I don't quite understand why Mozilla opted for mustard though!! Maybe this is only in windows 8.1, which I've been using for a few days now?

  • Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything.  Help!

    Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything.  These extra pages resulted from using Autoflow and now we can't seem to get rid of them.  Help!

    Good morning Old Toad.
    I did as you suggested:
    1) Booted from install CD.
    2) Ran Disk Utilities on internal hard drive--no repairs necessary. For good measure, did the same thing on external drive. Also no repairs necessary.
    3) Checked software update--no updates found. About this Mac said I was already running 10.4.7. For good measure, I downloaded the latest and installed it. Since it let me run the install, I'm not sure if I installed something new or reinstalled what I already had.
    4) I rebooted from CD, ran disk utilities, ran repair disk--no repairs necessary. Repaired permissions and a lot of permissions repaired.
    5) Tried to delete the files and the same old thing happened: kernel panic. The specific message:
    panic(cpu 0 caller 0x00102A08): jnl: transaction too big (1587712 >= 1572352 bytes, bufsize 8192, tr 0x29f1fb0 bp 0x2801de40)
    So there's no change in my status.
    I'm trying to delete the files because:
    A) They already take .5 Gb.
    B) I can't get rid of them ever. If I move the problem files to a different folder, I can only do one successful drag-and-drop backup to the external drive until the "new" thumb segments become unerasable just like the previous versions and crash the system.
    C) I can't even "just" drag and drop every file/folder except the thumbs, because that ends up crashing the system as well. So I have to drag and drop every file/folder in the iPhoto hierarchy individually. Which makes me less inclined to backup, which defeats the purpose of a backup.
    D) After the iPhoto fiasco I'm just crabby about all the Apple screw-ups I'm experiencing and I want to get them fixed.
    Thanks for your help. Any additional suggestions would be appreciated.
    G4   Mac OS X (10.4.6)  

  • How do I find my Serial Number and Redemption Code? The Troubleshooting keeps taking me to a page to enter my redemption code, but I also do not know how to locate my redemption code?

    The Troubleshooting keeps taking me to a page to enter my redemption code, but I also do not know how to locate my redemption code?  I need to activate my membership asap.
    Please help!

    use your redemption code to obtain a serial number.
    Redemption Code Help
    https://redeem.licenses.adobe.com/getserial

Maybe you are looking for