When selected preference advance style sheet to zoom. Cheak box and radio looks odd.

In safari 8. After updated OS X to Yosemite. When set preference>advance>style sheet to xxx.css.
In xxx.css contain :
body {
zoom: 110%;
Safari will show checkbox and radio box in all website distortion. As shown below.
Cheak box looks odd and invisible radio box.
Please, tell me. What caused it Or is it a BUG.
Thank You.

Does anyone have a problem it?

Similar Messages

XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
''If it displays in Firefox:''
It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
''If it displays in IE or embedded in another Microsoft application:''
In a web search I found these suggestions:
(1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
(2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
Any luck?

Both in safari and Facebook app. Likewise, can't see any Facebook contact pictures on contacts app. my softwar is up to date. my Facebook app is updated. please advise any solution to this. When you view it from safari, no pictures are shown and it looks

both in safari and facebook app. Likewise, can't see any facebook contact pictures on contacts app. my sofware is up to date. my facebook app is updated. please advise any solution to this. When you view it from safari, no pictures are shown and it looks like html script texts. In facebook app, there are texts but no no images shown. thanks.
iPad, iOS 6.1.3

Where did you get the device? Is it possible that it has an IT policy on the device blocking Facebook and/or Facebook options? Look in Options >Security Options >General Settings (actual menu paths vary with OS version) and see if there is any reference to IT policy.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Part 07 - Understanding and Using Cascading Style Sheets | Classroom: Basic Site Layout and Navigation in Dreamweaver | Adobe TV

In this video you’ll continue to further customize your website using CSS or Cascading Style Sheets. With CSS you can control many visual aspects of the website efficiently and consistently. Learn the basics of how CSS rules work and how you can easily take advantage of the power and flexibility of CSS in Dreamweaver including creating and editing your own CSS class.
http://adobe.ly/wTlFxC

some of these tutorials don't really work. changing the body image to scrolling or fixed doesn't change anything on my computer, and apparantly doesn't change anything on the version that the instructor is using either, since he never shows us the "before"

How do I select a cell in a multicolumn list box and use scroll horizontal on th

From an event structure, how do I select a cell in a multicolumn list box and use scroll horizontal on the front panel at the same time. I can select a cell from the multicolumn in an event structure, but I cannot move the scroll bar on the front panel when the program is running.
Solved!
Go to Solution.

I'm assuming you're referring to the scrollbar in the multicolumn listbox. What is your code doing when you select a cell? Can you please post your code so we can see the behavior you're describing? It's possible that you're blocking the event structure, as in performing some long operation in the event that's handling the cell selection. In this case the event structure has to wait until the event completes before being able to respond to the next event. You can configure the event to not lock the front panel while waiting for the event to complete.

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Error when selecting 'Preferences' under Tools menu

I would be grateful if anyone could assist me with an error I am having in JDeveloper version 9.0.3.5.
When I select Tools > Preferences I get a pop-up error with the details below.
Many thanks,
Mark
java.lang.NullPointerException
     at oracle.ide.addin.config.AddinManagerOptions.copyToImpl(AddinManagerOptions.java:151)
     at oracle.ide.addin.config.AddinManagerOptions.copyTo(AddinManagerOptions.java:462)
     at oracle.ide.util.ModelUtil.deepCopy(ModelUtil.java:297)
     at oracle.ide.config.IdeSettings.copyToImpl(IdeSettings.java:137)
     at oracle.ide.config.IdeSettings.copyTo(IdeSettings.java:131)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:313)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:241)
     at oracle.ide.cmd.IdeSettingsCommand.doit(IdeSettingsCommand.java:35)
     at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:363)
     at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:115)
     at oracle.ide.IdeAction$1.run(IdeAction.java:614)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Thanks for that Jan,
I did have a more recent version of JDeveloper (10g), but I have removed all versions of JDeveloper now and downloaded patch: p6469392_11i_GENERIC.zip which is for OA Framework Version 11.5.10.6RUP.
I have again gone to the Tools > Preferences after launching this JDeveloper version (9.0.3.5 Build 1453) and got the error box again, with the same error stack. I'm not sure where to start with this error as it is in the standard functionality of the JDeveloper GUI and any help would be appreciated.
Many thanks,
Mark

Apps crash when selecting HP Business Inkjet 2600 in print dialog box

Hope someone can help. With an open PDF document I select the print dialog box. If I select the HP Business Inkjet 2600 the application crashes (tried Preview and Adobe Acrobat). I can select other printers fine.
What I have tried so far:
Logged into root account and the issue does not occur, indicating a permissions issue.
I have tried repairing permissions using disk utility with no success.
I have tried creating a new admin account and the same fault occurs in that account.
I have reset the printing system and re-added the printer - no success.
The system is a PowerMac G5 2GHz, 768 MB RAM, 10.4.8
Please help : )
PowerMac G5 2GHz, 768 MB RAM Mac OS X (10.4.8) HP Business Inkjet 2600

Don't worry, solved it. Tested the printer using my powerbook G4 running 10.4.8. It worked fine so I copied the HP folder from /Library/Printers from the PB to the PM G5, repaired permissions using disk utility, rebooted and the G5 can now print fine to the HP.

When I enter a subject in the help "search box" and enter, it does not go to the subject but goes back to the screen before I clicked on the help option at the top of the screen

I cannot get thehelp option to work. When I click on the help option at the top of the screen, I get the page with the Search option, but when I enter a subject to search, tescreen returns me to the point where I started before clicking on "help". Is the help file corrupted? How can I fix?

Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Selection screen change with check box and radio buttons

hi frieds
i have an requirement that
there is a check box in the selection screen and bydefault it has been check if it check the selection box shuld be disable
if it uncheck the check box then selection block should enabled and in that againg two radion buttons are there. Bydefualt one radio button is enabled so that correspondng parameter is allow to enter input data. if i select the othere radio button the immeditely it allow the correpnding field entry and other radio button should be disabled with that field.
please send the piece of code...
regards
vijay

Hi,
Use the event AT SELECTION-SCREEN OUTPUT.
Here is an example:
at selection-screen output.
if gv_ucomm = 'RG1'.
    loop at screen.
      if pa_rgor = 'X'.
        if screen-name+7(1) = '2' or
           screen-name+7(1) = '1'.
          screen-input = 0.
        endif.
      endif.
      if pa_rgof = 'X'.
        if screen-name+7(1) = '1' or
           screen-name+7(1) = '3'.
          screen-input = 0.
        endif.
      endif.
      if pa_rgaa = 'X'.
        if screen-name+7(1) = '2' or
           screen-name+7(1) = '3'.
          screen-input = 0.
        endif.
      endif.
      modify screen.
    endloop.
endif.

When I type in search words in the google box and then drop down to the search that matches what I want, and click on it, it does absolutely nothing. It used to complete the search, how do I get it to complete the search?

Here is an example:
I type Denver Dum in the google box.
It gives me several options, one is Denver Dumb Friends League, which is what I want. I bring the cursor to Denver Dumb Friends League and click. It does nothing. The google box still has Denver dum in it. The only way to get a search to be completed is if I type in the whole phrase and hit enter. How do I get it to search using just part of a phrase? It used to do this before I upgraded to the newer version of firefox. Thanks!

Do you have the Google Toolbar installed?
See:
* http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs

I keep getting a dialog box that tells me to reboot my computer to complete a previous upgrade, however when I do I keep getting the same dialog box and cannot load firefox. I tried to remove Firefox but I keep getting the same message to reboot.

I was asked to upgrade Firefox using the Yahoo version and that is whne the problem started. I cannot remove Firefox or use it.

Try these locations:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
C:\Program Files\Mozilla Firefox\updates
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders, use %APPDATA% in the File name field
See http://kb.mozillazine.org/Show_hidden_files_and_folders

Site-specific style sheet rules

Hello,
Does anyone know if it's possible to add site-specific sections to my default style sheet (Preferences > Advanced > Style sheet)? It's possible to do this in Firefox using this syntax: @-moz-document url-prefix(http://www.apple.com) { ... }, but I'm not aware of a Safari or Webkit equivalent.
I'd like to undo some of the changes made in a recent re-design of one of my favourite web sites, but due to the rather generic IDs and class names that they use it's proving to be difficult to write a style sheet that only targets that site.
Thanks,
Tim

Hi Jinxed,
Firstly, I need to verify the followings:
Are you using SharePoint 2013?
What is website designer? Whether the website designer is SharePoint Deisgn Manager or SharePoint Designer.
Where can we find Site->Advanced->Edit Style Sheet?
Could you give me a screenshot for your Site?
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Dreamweaver CC understanding external style sheets when using Fluid layouts?

I'm attempting to build a website using the Dreamweaver CC Fluid layout feature. I've been using this tutorial:
http://www.adobe.com/inspire/2012/08/fluid-grid-layouts-dreamweaver-cs6.html
The bit i'm stuck at is when it comes to attaching a external style sheet to format the text and content. So to be clear, i've already created my fluid layout and created a 'layout.css' file when promted, then using some html 5 class div tags (header, navigation and article) i've built my layout. All doing what I want up to this point.
Now I need to start adding content and from what I understand its much better practice to set up another external style sheet for the text formatting and styling.
I used the CSS Designer to 'create a new CSS file', called it 'typography.css' and I can see its linked to the main Source Code file.
I understand that theory but here is where its confusing for me:
After creating and linking the new CSS file what do I do next? Do I have to hand code in various text formatting ids or is there a more visual way of doing it? Or do I select my text content in the source code page and then press the '+' button in the 'Selectors' panel to start adding ids that way? And should the class or id names in the new CSS file be the same as in the layout CSS file or different?
I guess I dont really understand excatly how external style sheets should be created and implemented, all the youtube vids i've watched so far are done with hand coding but i'd like to use the Properties panel to do it in a more visual way if possible.
Any tips or help greatly appreciated, some basic learning needed. Thanks.

Giving a detailed explanation of how to best use CSS goes beyond the scope of what this forum can do. There are volumes of books, blogs and tech sites devoted to this topic.
A Must Read -- How to Develop with CSS?
http://phrogz.net/css/HowToDevelopWithCSS.html
In a nutshell, make the most of your logical HTML tags. They not only add semantic structure to your content, they serve as hooks for your CSS styles. Don't class or ID something unless you absolutely need it. The goal here is to keep your HTML streamlined.
/**effects all h2 tags in your site**/
h2 {font-size: 125%}
/**only effects h2 tags inside headers**/
header h2 {color:orange}
/**effects all p tags**/
p {font-size: 100%}
/**only effects p tags inside articles**/
article p {color:#333}
Nancy O.

RH8: Style Sheets Issue

I inherited an RH8 project from another writer and now I'm trying to make some sense out of it.
My latest issue:
When I expand the Style Sheets folder in the Project Manager pod, there are 2 CSS files plus about 15 subfolders. The folders seem to have the names of some of the books in the TOC, but delimited with underscores. Also, there are obviously many more books in the TOC than subfolders in the Style Sheets folder.
When I right-click one of the subfolders and select Explore, they all contain image files and one FPJ file. Each FPJ contains only:
<?xml version="1.0" encoding="utf-8"?>
<rhpml majorversion="3" minorversion="0">
</rhpml>
Further, the image filenames are sequential (such as image002.gif, image003.gif, and so on) and they repeat in the different subfolders. But image002 in one subfolder is a different image than image002 in another subfolder.
Any ideas what's going on here? Thanks in advance.

They are "real" folders because I can acess them in Windows Explorer.
If I right-click on the folders in the Project Manager, one of the following occurs:
The Delete option is disabled.
The Delete option is enabled. But when I select it, I get a confirmation message that the folder and all contents will be deleted. I can click OK and it's deleted.
The Delete option is enabled. But when I select it, the folder is deleted without the confirmation message.
If these are "man-made" folders, can I safely delete them?

When selected preference advance style sheet to zoom. Cheak box and radio looks odd.

Similar Messages

Maybe you are looking for