When selecting 5.1 speaker set-up option in audio console I get no sound.

Ok; hi all, i just regestered today., My problem is that i cant get the 5. in the audio console to give me sound, all i get is a buzzing. i have the audigy2 zs notebook card. i have x64 bit win7 using latest beta drivers. in control panel/sound i can set the speakers to 5. and it works fine if i set the audio console to 4.. Is their something im missing to get the 5. in the audio counsole to work in 5. speaker mode? My speakers are Logitech Z-5500. Any Sugestions will certainly help. thanks in advance: AweSound

VRe: 5. speaker option in audio console not working/ only useing 4. will i hear sound Any Know if windows7 has a issue with this?problem? i have tried daniel k's driver pack and still i dont get 5. option to work , all it does is buzz. Also the green bars in control panel/sound shows its trying to work but i get just the buzzing.

Similar Messages

  • I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?

    I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?

    Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
    tt2

  • When Audio Console launched, Unable to find audio device error message comes

    When I launch audio console, I get an error message saying:
    "Unable to find audio device. Please make sure that your audio device is enabled and installed with its driver. This application will be closed."
    This can't be right because my soundblaster audigy 2 ZS platinum card is installed, its working, I can hear things etc.
    I uninstalled and reinstalled the audio console software package from creative and that fixed the problem for a very short while and it is now reoccurring.
    I've had this same setup for several years with no issues, now all of a sudden, this is happening.
    Anyone out there had similar challenges?
    Thanks for looking!Message Edited by dgmtoronto on 07-22-200703:33 PM

    Most probably you don't have passed the correct root= option to the kernel so that the kernel cannot, as it says, find its root device. Read the wiki page about refind in order to know how to configure it (https://wiki.archlinux.org/index.php/REFInd). Refind as no fully automatic configuration like grub.

  • No longer get a sound notifications when mail arrive in the in box

    Hi,
    when I receive an email using the mail App I no longer get a sound notification ! , I always have done up to now ?
    I have checked the Mail App: mail/preferences/general/ New mail sound (and tick in Play sounds from other mail actions. but I do hear the sound when selecting the new mail sound, when chosen from the drop down list but not when new mail arrives in the in box ?
    I can hear sound from the iMac when using it with other things ?
    Can anyone help, please
    Martin
    Message was edited by: MartinBrads
    Message was edited by: MartinBrads

    Same problem I just realized I had. using IMAP mobileme server. No new mail sound. All other sounds work fine. Obviously a problem on Apple's end in the way the new mobile me/imap & Mail app work.

  • TS5150 We just set up our Apple TV 3rd gen but not getting any sound. We have the boss system hooked up to the cable tv. Support could not help us, we were told to call Boss.

    We just set up our Apple TV but not getting any sound. We have the Boss sound system. Support could not help us they directed us to call a Boss.

    Do you mean Bose sound system? What model?

  • Why, when selecting the options box in the tools tab, does the whole page become unusable???? I cannot set my homepage at all.... very annoying..

    On Saturday I upgraded to version 10 beta, after installing the version, the options box in the Tools tab will not function. When selected the screen is "blocked out" and the only way forward is to Ctrl+Alt+Del to reset the browser.
    I have tried several times to re install but the settings are dragged into the new version. If this keeps on happening I will revert to the original browser.

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    Your previous tabs will not re-open or be available to re-open when starting Firefox if:
    *your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
    *you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
    *you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
    NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
    If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    *See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS

    I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
    It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
    Any one with ideas/

    What is your screen resolution?
    What operating system?

  • When I receive calls I always get the option to remind me later, but only certain times I get the option to respond with text.  Is there a setting I need to update to always get this option?

    When I receive calls I always get the option to remind me later, but only certain times I get the option to respond with text.  Is there a setting I need to update to always get this option?  Also i can't use location reminders.  Is this because my calendar is in Outlook?

    The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.

  • When I click on the drop down options they are flicking quickly & I can't select one. I've uninstalled & re-installed Firefox. Any ideas?

    It happens whenever I'm on the internet - banking etc. Usually the options - like how I want my name written - come up when I click in a box, and I can select the one I want. Now however when I click on the box the options flicker past quickly & no matter how fast I move my mouse I can't select anything! Very frustrating, so I hope someone can help me.

    Try to update to Firefox 12. Does the issue still happen there? (Firefox 3.6 is no longer supported or secure).
    Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
    A few other basic trouble shooting things you can try is this:
    Run all Windows Updates, install all needed service packs, etc.
    Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
    Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.

  • I make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

    i make videos using my go pro hd camera, but when i export it only half of my 3 min video shows up with the audio playing in the background, plus when i try to select the quality in the export options it won't let me select 720p or 1080p?????? help!!!

    What you could do now is break up your video into smaller parts and render them out, then assemble them again as a whole.
    I know this is not the best fix, but it might work.
    You can duplicate an edit in the main screen, then delete the last bits and export,
    do the same for the other half.
    Then import the two bits (or more if you need) in a new edit.
    Out of curiosity, can you post what format the video is in?
    Copy a video straight from the camera to your computer.
    Open it in Quicktime player, and with out playing type Apple + i
    or Control + i for PCs
    It should tell you lots of info about the video, and might help us to see what is wrong.
    This is what it looks like:

  • HT204291 Hi, I have the apple tv icon in i Tunes  but when I click the icon only a small window comes up with only speaker control, no option of turn mirroring off or on. any ideas?

    Hi, I have the apple tv icon in i Tunes  but when I click the icon only a small window comes up with only speaker control, no option of turn mirroring off or on. any ideas?

    thats not how airplay mirror works
    read this
    http://support.apple.com/kb/ht5404

  • Inernet Explorer error when setting report options to xml

    I get an error message stating that I need ot upgrade my ie to version 6 when I try to set reporting options to xml.  The ie version on the PC is 6.0.2900.2180....
    Has anyone had this problem? 

    Anand,
    thanks for the help. 
    Regarding your questions, I found the key to be missing on 3 computers.  One was a Dell Laptop with factory installed XP pro and the other 2 were Stealth computers (rack mount) also with XP pro from the factory.
    The computeres are on our network and get updates regularly, so I do not know if the updates had anything to do with the problem.
    Screenshot of IE is attached (.bmp)
    Attachments:
    IE6.jpg ‏52 KB

  • LV Crashes when setting history options

    LV will crash when setting history options on VIs. This happens at least in LV 8.0.1 on Mac OS X. Other systems or versions may or may not be affected. This happens when opening a reentrant VI as a reference and then using a property node to set these options.
    An example is attached for LabVIEW 8.0.1.
    Attachments:
    SubPanel Crash.zip ‏15 KB

    Ok, for me, it crashes under LV 8.0.1 with and without the 0x08 flag set. Under 8.20b13 it did not crash at all either way. Mac OS X.
    I have a work around. This code was only trying to work around another bug . So I deleted the property settings from my development code and more or less have things working. The original bug above is annoying but I have worked around it. I just really want to make sure that LV doesn't crash under any circumstances. Glad that a CAR has been generated.
    Hopefully it has been permanently fixed in LV 8.20! I will check as soon as I get my disks in a few months.>

  • Setting socket options server-side: when?

    Hi!
    I'm trying to implement a iperf ( http://dast.nlanr.net/Projects/Iperf/ ) -like bandwidth measurement tool in java, and I need to be able to set different socket options (window size, TOS byte etc.)
    My question would be, when should I be setting these options on the server-side? Should I set them for the ServerSocket (whatever's applicable there- not much), or should I try setting them on the socket returned by accept() ?

    Yes, but my point is that you can't set TOS in 1.4
    regardless of where is should be set, so the point is
    moot. And although you can do that in 1.5 that might
    not meet your goals (and given that 1.5 is in beta and
    that the feature is new, it might not work at all.)
    And 1.5 might not do the other stuff that you want
    either.That's strange, as I thought this one should do just that:
    http://java.sun.com/j2se/1.4.2/docs/api/java/net/Socket.html#setTrafficClass(int)
    Even stranger, as I was actually able to set the TOS byte on outgouing packets, using 1.4.2 (Although I'm aware, that it does depend on the underlying implementation, so it's not certain, that it will be respected)
    Right now I'm trying to figure out, why it's not working on my Gentoo Linux system - tryed it with three different JREs, but still nothing.
    I was able to set the TOS byte of outgouing packets on a RedHat7.3, and on several Win2k, and WinXP hosts (after working a bit on their registry ... ).

Maybe you are looking for

  • TV Show Items not showing in iTunes Library (or Purchased Playlist)

    I recently purchased 4 episodes of the BBC Planet Earth series 1 in HD in four separate transactions. During the first transaction I was surprised that both the *HD version* and *Standard version* was in download list. Since this was my first purchas

  • Do you have to upload all new pages if you edited the template file?

    I've edited a template in Dreamweaver and applied all changes to pages that use this template. Previously, I had been uploading the templates onto my server, but after realizing that uploading the edited template to the web the pages didn't change. W

  • Using weblogic clustering to improve permance in J2EE applications

    I'm wondering if someone can help me to figure out a solution to some performance issues already existing in my Weblogic-based application.           - Current configuration: 2 weblogic domains where each domain contains it's own weblogic instance an

  • I Cannot Purchase Tracks From The New U218 Singles CD By U2

    This is very strange. When I try to purchase some tracks from the U218 Singles CD that just came out today, I get a dialog box that states that "The item you tried to buy is no longer available". LOL!!!!

  • Help on smartform

    hello experts!! my requirment is based on plant code(ekpoo-werks) i want display the data in single purchase order and address details of palnt in address window..tax details in tax window...like that...i want to display the data in form where i can