When selecting Export- email medium jpeg I get a tiff format

Mac OS X 10.6.8
Aperture 3.2.4.
When I use Export and select Email...
Small jpeg     I get a .jpg file format
Medium jpeg   I get a .tiff file format
Large jpeg   I get a .jpg file format
I was using RAW format and exported Version.
Any thoughts?

Check the settings of the "Email Medium" setting.
Select the "Email Medium" setting in the "Export" panel.
Then switch the setting to "Edit". What is the setting of the "Image format" pop up panel? Does it show "Jpeg" or "Tiff"?
If the format is set to "tiff", change it back to jpeg.
Regards
Léonie

Similar Messages

High CPU usage when selecting certain emails

I experience (above) 100% CPU usage in Mail.app when selecting certain emails. Mostly emails from the same sender.
The emails contain MIME multipart data. One part is BASE64 encoded text, the other is quoted-printable encoded HTML.
I can see in the process trace that two threads seem to be thrashing around in MFRedundantTextIdentifier.
CPU usage goes up. I can still use the application (it is not blocked). But it cannot be quit normally (only with force quit).
Apple engineers: this must be something that you would wish to find and fix?
Any help with diagnosing would be greatly appreciated!
Sincerely.
-dennis

Maybe my initial post was not clear so let me add some clarifications.
I have the problem with Aero disabled
I have the problem on the Apple site which does not have any flash content.
I have already hacked the lastest nvidia drivers to get them on my system which did not change anything. Can you provide a link to some other 'supported' beta drivers?
I am using the new 13 inch air so it has the newer graphics card so I would expect it to be faster than an old HTPC with a 9400m in it. I wasn't stating that my Air had a 9400m.
It would be great if someone you also do the test to check the cpu load:
- when playing a 720 mkv
- when dragging a window across the screen
Just open task manager and see if the CPU spikes.
Many thanks!

Blank expansion window when selecting a EMail subject ?

When selecting an email subject the header appears in the right hand pane but no textual or other data from the email content is displayed in this right hand pane.

Close the mail app and reboot the iPad.
Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close - the mail app - and then swipe "up" on the app thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

When trying to email keynote presentation, I get a msg that says cant send nor save msg. How do I send it...using an iPad btw

When trying to email keynote presentation i get a message which says"can't email nor save message"

Please note that Thunderbird is not an email service. Thunderbird is the program that can be used to read mail.
The email provider, is the part of your email address that comes after the "@" symbol. Can you please post that. (Do not post your entire email address, for privacy reasons).

HT204380 I cant set up my facetime in a new iPod touch 5 generation, I enter my apple id and password and select my email address and it get verification but after that it come back to enter my apple id and password again. please help

I cant set up my facetime in a new iPod touch 5 generation, I enter my apple id and password and select my email address and it get verification but after that it come back to enter my apple id and password again. please help

This is the iPhone forum

HT203421 When selecting "Updates" on App Store I get error message: "Couldn't be completed. (NSURLErrordomain error 1012"

When selecting "Updates I get error message "Operation couldn't be completed. (NSURLErrordomain error-1012".

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

When I export from LR5.3 I get an error message Win32 API error . However the export seems to work.

The message is Win32 API error 2 ("The system cannot find the file specified") when calling ShellExecuteExW from AgWorkplace.shellExecute. However the export works. What is happening and how do I get rid of the error message?

Near the bottom of the Export Daialog, in the "Post-Processing" section make sure that the "After Export" box is not empty (which is invalid and causes the export operation to trip up). Use the drop-down to select a valid choice such as "Do Nothing".

How I can keep the original date of a photo when I exporte it in jpeg format (using the iphoto menu) ?, How I can keep the original date of a photo when I exporte it in jpeg format (using the iphoto menu) ?

I imported photo from my iPhone 4 to t iPhoto on my MacBookPro. Then I wanted to export some of those photos as jpeg file, using the export menu of iPhoto, to put them in a folder in Finder. When I did, all the original have been lost.
I tried to copy/paste and I had the same problem.
If someone can help me, it will be great !
Thank you

Why do you think the date has been lost? If you export the photo from iPhoto the date the photo was taken is there in the EXIF data (simple EXIF viewer will let you see it - http://homepage.mac.com/aozer/EV/ )
My best guess is that you are confusing the file date with the photo date - they are totally different - photo programs like iPhoto use the photo date - file programs like the finder use the file date - they have no relationship to each other
LN

When trying to EMAIL from BEX Broadcaster get a 400 bad HTTP request

When we try to run an email from BEX broadcaster, we get the message below.   We looked in the ICM and it says the request is too large, but when when I copy the request and paste it into the browser it works, any ideals?
400 Bad HTTP request
Bad HTTP request
Error:     -21
Version:     7000
Component:     HTTP_FILTER
Date/Time:     Mon Apr 05 17:54:18 2010
Module:     http_auth.c
Line:     494
Server:     biprd_BIP_11
Error Tag:
Detail:     illegal request

Hi David,
Not exactly sure what the issue is here, but would like to give you some pointers that might help anyway. The error message you see in the ICM would be where I would start. You need to remember that the HTTP request is more than just the URL that you paste into the browser, the URL is one part of it, but there are a heap of other things that go into making the full HTTP request (e.g. POST data, header values etc...)
I would also refer you to this forum post: Re: 400 Bad HTTP request that references SAP Note 864878
Hope this helps,
Simon

On my Mac, when selecting an email and entering it won't open the email. I have rebooted twice and no change.

If I get an email reply, I won't be able to open it to get the answer. This just happened out of the blue. I can check the box to the left of the email, but when I try to open, delete, or put in stored mail, nothing happens.

Have you tried closing the app completely and seeing whether it works properly when you re-open it ? From the home screen (i.e. not with the scrabble apps 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I changed from english to spanish and then back to english and now it does not recognise english when i type emails. how do i get it back to english?

i changed the lan uage of my iphone 3gs from english to spanish and then back to english. now it does not recognise enghlish but seems to be using a mix of languages. how do i get it back to english please?

Please check in Settings: General: Keyboard: International Keyboards how many there are and which.
If there is more than one you can either delete the ones that you don't use, or if you want to type on different ones at different times you can change between them using the key with a world that appears when you are using the keyboard.

Mail App 4.3 crashes when selecting individual email for reading

Does anyone have experience with this problem? Does anyone have a solution for this problem?

Hi Ernie,
I've gone thru my applications and do not see anything that appears to be an enhancement app. I previously had Missing Synch installed (since removed). As far as plugins, I do not think I have any but do not know how to confirm that. I've looked thru Mail.app's menus and preferences, and do not see any indication of any being installed.
I don't know if I it has any bearing but under System Preferences/Other, I do have MacFuse installed.
Thanks again for the help,
Greg

Trying to export to .swf but keep getting an .html format file

Surprise surprise, I'm confused again.
I am trying to export a Keynote '08 slide presentation to .swf to enable it to play in my web site. When I look at the exported files, it has the .swf extension but the info for the file shows it as a html document. when I upload it, it won't play and I get the message that QuickTime can not open that file type.
Any ideas please?
Cheers...Scotty

SWF stands for Small Web Format and, nowadays, is used to embed a flash video into a browser viewable document.
More details about SWF here: http://en.wikipedia.org/wiki/SWF
The .html file simply contains the link to the .swf document so you will need both the files to view the presentation inside a browser, i.e. open the html and you will be presented with the video.
I know that some .swf play directly but the right way is to use the html file or better, it's possible to make a swf self running but not all the applications act this way.
Don't forget that without the flash player browser plugin the file will not be visible.
cheers
rob
Message was edited by: clangwork

I get poor picture quality when I export my slides from keynote as jpeg and print them as a photo, any help?

I made a slide of multiple pics and objects, I am trying to export it to an 8x10 photo, the shop I am using only allows jpeg. The quality is so poor when I print it, is there a way to get better quality as I export it? I used keynote because I could set up a custom slide size (8x10) and then added the pics and other graphics in hope I could export as a jpeg and get a good quality photo? The photo images and slides are good quality it is the exporting where I am loosing clarity.
Ugh any help?

I made a slide of multiple pics and objects, I am trying to export it to an 8x10 photo, the shop I am using only allows jpeg. The quality is so poor when I print it, is there a way to get better quality as I export it? I used keynote because I could set up a custom slide size (8x10) and then added the pics and other graphics in hope I could export as a jpeg and get a good quality photo? The photo images and slides are good quality it is the exporting where I am loosing clarity.
Ugh any help?

Exporting iPhoto 6 jpegs

When I export photos as jpegs, they are no longer openable by Windows users as they previously were with older versions of iPhoto. I now have to resave those images as jpegs after opening them with Preview. They are a different type of jpeg then since they are saved separately instead of replacing the original exported jpeg. What's going on?
IMac G5, Power PC Mac OS X (10.4.7)

When you export them is the "Use extension" checkbox selected? Without the extension Windows can't tell what type of file it is.
Do you Twango?

When selecting Export- email medium jpeg I get a tiff format

Similar Messages

Maybe you are looking for