When sending a calendar invite to any email address (regardless of provider) that is associated with an Apple ID will not get the invite. Any email address not associated with Apple ID will. Why? Using iOS 6.0.1, iPad, iPhone and PC.

I have sent an invite to an email associated to an Apple ID and that email never received the invite. I then changed the email associated with the receiving Apple ID to something new and removed the original email address (the original email address is no longer associated with any apple ID even as the alternate). I then cancelled the first appointment, created a new appointment and again invited the original email address. That original email address then received the canceled appointment notification and the new appointment invite. This problem is not just with my Apple ID (sending or receiving) but several other people that have tested sending iCloud invites to other Apple ID users. Any thoughts?

Hi Stateler74,
Thanks for using Apple Support Communities. You might be able to find the Apple ID that her email address is associated with by following this article's instructions:
Apple ID: Finding your Apple ID
http://support.apple.com/kb/HT5625
Cheers,
- Ari

Similar Messages

I can not get the debugger to work on oracle studio 12.3 - It will not attach

I can not get the debugger to work on oracle studio 12.3 - It will not attach

APN for Tmobile is epc.tmobile.com
MMSC is http://216.155.174.84/servlets/mms
Here are the instructions:
Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
Application manager --> Application catalogs --> New
Catalog name: Extras-devel
Web address: http://repository.maemo.org/extras-devel
Distribution: fremantle
Components: free non-free
Refresh catalogue
Install fAPN and fMMS
Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
Run fMMS and it will start with configuration
Put APN name the same you named your MMS APN point during fAPN configuration
Type MMSC which you can take from your operator
Type your number starting with +
Put max size of pics you want to have in outgoing MMS
Save all and start sending MMS from fMMS menu.
It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
WHEN YOU GO TO MMS to set your configuraions, the information should look like this
MMSC: http://216.155.174.84/servlets/mms
Resize Image: 300
Your Phone Number: +##########
NOW U ARE DONE!! =)

TS1398 my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

my iPad isn't accepting the wifi code - states it is wrong password, though it is the same on my iPhone and laptop. Toggled wifi off/on, tried 'forgetting network' and not getting the option. IP address etc fields all blank

WiFi Troublshooting
iOS: Troubleshooting Wi-Fi networks and connections
Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions).
Wifi Settings greyed out or dim
http://support.apple.com/kb/TS1559
Recommended wifi settings
http://support.apple.com/kb/HT4199

HT4112 I can not get the 2003 Bluetooth wireless keyboard to pair with my ipad. How do I do this? According to the information above, this IS possible...

I can not get the 2003 Bluetooth wireless keyboard to pair with my ipad mini, 32gb wifi. How do I do this? According to the information above, this IS possible...

Never mind... Didn't see the "not compatible"... Stupid... It's bluetooth. Bluetooth apple should connect to bluetooth apple... Period...

BP_CONT: not getting the contact person email value from custom controller

Hi Experts
not able to find the email address in any of the context node, actually my requirement is while creating the BP contact , get the email address BP_ADDR/StandardAddress STRUCT.E_MAILSMT . take this email id and check whether this email id exists in system if exists throw the error while saving . for this I did the codin in BP_CONT component on save method but while saving some times my custom controller is getting initiated some times it was not containing any value , kindly let me know how can I get the email value of contact person in BP_CONT component in view BPCONTOverview .
here is my code on method eh_onsave
lr_curo_bpcont_custcntrlr ?= me->get_custom_controller( controller_id = 'BP_CONT/BPCont' ).
IF lr_curo_bpcont_custcntrlr IS BOUND.
    TRY.
        lr_entity_privstdaddr ?= lr_curo_bpcont_custcntrlr->typed_context->privstdaddr->collection_wrapper->get_current( ).
        lv_privstdaddr_e_mailsmt = lr_entity_privstdaddr->get_property_as_string('E_MAILSMT'). " Get runtime email value of contact person
        lr_entity_bpcategory ?= lr_curo_bpcont_custcntrlr->typed_context->builheader->collection_wrapper->get_current( ).
        lv_partner_category = lr_entity_bpcategory->get_property_as_string('BP_CATEGORY'). " Get Partner Category value
      CATCH cx_sy_ref_is_initial cx_sy_move_cast_error cx_crm_genil_model_error.
    ENDTRY.
ENDIF.
here the problem is some times I'm getting the value and some times I'm not getting value the related objects also through get related entities contact person emial is not getting populated any where
kindly help what is going wrong
Thanks & Regards
Rajasekhar

Hello Rajasekhar,
Could you please share how you resolved this issue? I have the exact same requirement (duplicate check based on email).
Kind regards

Not getting the "under review" email after 2nd time re-submitting podcast.

I started by doing a test podcast (this has no real podcast info, the audio of it was simply me saying I was testing the feed to see if it would work). I submitted my podcast to the iTunes store and shortly after, I received an email saying thank you, my podcast is under review and I would receive an email later if it was approved or not. About 3 days later, I received an email saying it was rejected because it appeared to be a test podcast.. to shape it up, and re-submit when it was complete. I got to work and completed the podcast with chapters, artwork, voice, intro, outro, and all the text information needed. I went back to the iTunes store to submit the completed podcast, but never received that initial "thank you for submitting, it's under review, we'll let you know" ... email. I waited a few days, and nothing. It seems as though since I submitted a "BS" podcast at first, they're rejecting anything else I submit. Is my feed bad? or what could be the problem? Please help, thanks.
my feed:
feed://web.me.com/djchuckc/siteone/Melodica/rss.xml

Technically speaking, your feed appears to be OK: it can be subscribed to manually from the 'Advance' menu in the iTunes application (a process which does not involve the store).
However, your episode appears to consist of a collection of commercially issued tracks. If this is indeed the case, and if you do not have either the written permission of the copyright owners, or a licence from a recognized authority, then the iTunes Store is likely to reject your podcast on grounds of breach of copyright. If they do so I would expect them to notify you, though the email is usually a blanket one which implies that the rejection is on technical grounds: the process can take over a week as it has to be done by real people and there is likely to be quite a queue.

When I use my bullzip printer with Foxfire 7.0.1 I get the following message: script engine not initialized to valid language. This is a problem only with Foxfire7.0.1. When I use IE 9.0 it works fine and I have no script initialization problem.

I have been using bullzip printer for years with Foxfire. I am now using a version 7_1_1_0_1218 of bullzip printer I downloaded in March 2011. I am using Windows Vista Service pak 2 with all latest updates.

ah..interesting. I found an alternate solution that works for
us at least
Our authentication is called from a file called
bluestemcookie.cfm with this format
<cflocation
url="https://#CGI.HTTP_HOST#/bluestem/lb_login.pl#AGREEMENT_PATH##CGI.SCRIPT_NAME#"
addtoken="No">
I was having the exact same problem, but notiece that if I
changed lb_login.pl to lb_login.pl? it now understood that
everything after was parameters and off it went to authenticate. Of
course then upon return I had a /? in my url and it burped again.
In looking at the construction of the URL to return in lb_login.pl
#---Construct Return URL------------------------------------
$ReturnURL = "https://$bluestem'R_ServerNamePort";
$ReturnURL .= $bluestem'R_PathInfo;
$ReturnURL .= "?$ENV{'QUERY_STRING'}" if
$ENV{'QUERY_STRING'};
I noticed the ? in the beginning fo the third string
concatenation. hmm.... removed that ? and now all our
authentication with IIS6 CFMX7.1 Win2K3 work fine. Just food for
thought as your solution appears to be better.

Why can I not get the normal firefox start page instead of the "yourall-in-one page I currently have

why can I not get the normal firefox start page I had with my old computer (operating XP) instead of the "your all-in-one page" I have now I have moved onto windows 7

I have looked as suggested under the Firefox tab but find the following listed as my homepage
http://uk.foxstart.com/?rls=en:uk:zp
Have I actually installed firefox program/start page or have installes something else?

IOS 5 used to allow Airplay between iPad (WiFi) and Apple TV (Ethernet) as long as they were on the same network. In iOS 6, now both the iPad and the Apple TV have to be on the same network and both have to be connected using WiFi ? Why did they change ?

iOS 5 used to allow Airplay between iPad (WiFi) and Apple TV (Ethernet) as long as they were on the same network, i.e. connected to the same wired/wireless router. In iOS 6, now both the iPad and the Apple TV have to be on the same network and both have to be connected using WiFi ? Why did they change this ? Means that the iPad and the Apple TV box both have to be in range of the wireless router when this wasn't a restriction before. Apple TV could be anywhere as long as it was connected to the same wireless router via ethernet cable. Seems like an unnecessary thing to restrict.

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

HT204022 I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

I have just got an iPad and I want the music to be transferred through my iPod touch using iCloud but I didn't get the music from iTunes so I don't think it will let me do it. Do you have any tips that could help me?

I have just got an iPad and I want the music to be transferred through my iPod touch using iCloud but I didn't get the music from iTunes so I don't think it will let me do it. Do you have any tips that could help me?

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

HT4972 how come i can not use iOS 6 on my ipad 3 to get the youtube or pinerest app? it keeps giving me a message to use iOS5

How come i can not use iOS 6 on my ipad 3 to get the youtube and pinerest app? i keep getting a message to update to iOS5 if i must use iOS5 how do i update to that one because it just took me 4 hours to figure out how to update to iOS6

We have read that any apps that use the google map app (removed by ios6) will not work. We have lost a great camping app for this reason, and have heard that some weather apps are not working either. The company line we've been given is it's up to the app developer to rewrite their apps. ***** doesn't it.

My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?

My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?
I've changed the bill payer to myself but it stills says on emails that I sent that its from my mother.

In order for the "From" field to show you options on the "from" addresses available, you must set them up in the Preferences > Accounts first.
I can't show you a screen shot of the from field because I currently only have one account, so the from address used is the default. However, when I had more than one, then options will show up in your compose/reply window.
You'd need to add an account here:

Can't use Find My Friends on iPhone due to Apple ID not being verified. Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!

Can't use Find My Friends on iPhone due to Apple ID not being verified.
Can't do this as I can't access my .mac email any longer and I can not change the primary e-mail address for my Apple ID!
So my options are:
Create a new Apple ID, use that and lose all the apps I've purhcased with it (a fairly substantial amount)
Somehow Migrate these purchases over to a new Apple ID
Apple let me change the primary ID for the account
Anyone else ran into this before?
I've tried accessing the mail through a mail application using the correct server information, and trying both the old 6 character password and the one I had to change it too after they updated the security guidelines - neither work.
Help would be greatly appreciated as I can see more services down the line not working without the address being verified!

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You should not need to verify the old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Hello, Can anyone tell me if there is any mail to get in touch with Apple support? ... I do not remember my password for my IDApple and when I enter iforgot.apple to recover I do not get the email

Hello, I'm trying to get my Apple ID password but when I enter the page that helps you to recover it tells me to send an email and I do not get ... with what I can not reset my password ... Can anyone help me? ... Are there any email from Apple support where you can tell what I get to help me to recover?. Thanks!

Apple does not have email support. If you're not getting the email verification from Apple, check your anti-spam filters, on your computer and with your email provider, to make sure that emails from Apple aren't being blocked. You can also try the Security Questions option rather than the email authentication. See:
http://support.apple.com/kb/HE36
Otherwise, you'll need to call Apple support:
http://support.apple.com/kb/HE57
Regards.

When sending a calendar invite to any email address (regardless of provider) that is associated with an Apple ID will not get the invite. Any email address not associated with Apple ID will. Why? Using iOS 6.0.1, iPad, iPhone and PC.

Similar Messages

Maybe you are looking for