When sending an email message with attachment, the message disappears.

I send and receive messages without any problems but when I try sending a message with an attachment (using Documents to Go, IAnnotate PDF, IWork,) the message somehow disappears (it is not sent to the destination and not listed on "Sent" messages folder. Is anyone having the same issue?

Hi Jaime,
Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both objpack-obj_langu = '3' & doc_chng-obj_langu = '3' instead of '3' please replace it with 'J'.
Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
Regards,
Gokul

Similar Messages

Sending (imap) email draft with attachment created on computer from iphone

Here's one situation:
I type up an email and attach an excel file to it, then save it as a draft (in my @me.com drafts).
The draft email is now visible in the drafts folder on all of my devices: apple mail on my computer that I originally used, my iphone mail drafts, and also by signing on to www.me.com and opening my mail drafts.
one problem is when you open up an email draft on me.com that was created on a computer mail.app, only to see the message body text lose all of its formatting and appear to be jumbled html.
My main concern / question is:
The email draft with attachment appears to be in tact on me.com and on the original computer, but NOT on the iphone. On the iphone, the attachment seems to disappear. Well, not disappear, because it gets replaced by a small rectangle with a blue question mark in it. Basically you cannot view the attachment on the iphone. When you try to send this draft from the iphone, it works, but with jumbled text & no attachment.
Does anyone have similar problems???

You are correct about the iDisk app as I have started to use that a little bit more for the sharing purposes.
However my concern wasn't over the simple task of getting excel files onto the iPhone. It's the fact that email attachments that are either in drafts, OR ALSO if you move a message (with an attachment) into an IMAP email folder, are completely lost when it comes to viewing or sending them from the iPhone. It's stupid - the attachments are still there on my computer (and I think they are still there on the me.com mail viewer as well).
Sometimes I move certain important work emails (that have attachments) into an IMAP email folder so they can be accessed from anywhere. The fact that the iPhone shows the paperclip and placeholder bit not the actual file is maddening. At least If the attachment was actually SENT from the iPhone, I wouldn't even care about not being able to view it (or even view the File name that is also lost).

How can I set the language when sending an e-mail with attachment - 'Html'?

"Character Broken"
I made an ALV program, and this convert to "HTML', and send an e-mail with this.
Used Process is:
DATA: gt_abaplist LIKE TABLE OF abaplist,
      gt_html LIKE TABLE OF w3html,
      doc_chng LIKE sodocchgi1,
      objpack LIKE TABLE OF sopcklsti1 WITH HEADER LINE,
      objhead LIKE TABLE OF solisti1 WITH HEADER LINE,
      mail LIKE TABLE OF solisti1 WITH HEADER LINE,
      reclist LIKE TABLE OF somlreci1 WITH HEADER LINE,
      lv_line TYPE i.
DELETE FROM MEMORY ID '%_LIST'.
SUBMIT z_template
   AND RETURN EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = gt_abaplist
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
TABLES
    html       = gt_html
    listobject = gt_abaplist.
doc_chng-obj_name   = 'URGENT'.
doc_chng-sensitivty = 'O'.
doc_chng-obj_descr = ' '.
doc_chng-obj_langu = '3'.
objhead-line        = ' '.
APPEND objhead.
mail[] = gt_html[].
DESCRIBE TABLE mail LINES lv_line.
CLEAR: objpack.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = lv_line.
objpack-doc_type   = 'htm'.
objpack-obj_descr = ' '.
objpack-doc_size   = lv_line * 255.
objpack-obj_langu = '3'.
APPEND objpack.
CLEAR: reclist.
reclist-receiver = 'e-mail address'.
reclist-rec_type = 'U'.
APPEND reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data              = doc_chng
    put_in_outbox              = 'X'
    commit_work                = 'X'
TABLES
    packing_list               = objpack
    object_header              = objhead
    contents_bin               = mail
    receivers                  = reclist
EXCEPTIONS
    too_many_receivers         = 1
    document_not_sent          = 2
    document_type_not_exist    = 3
    operation_no_authorization = 4
    parameter_error            = 5
    x_error                    = 6
    enqueue_error              = 7
    OTHERS                     = 8.
SUBMIT rsconn01 AND RETURN.
I want to show this by "Japanese".
But the character is broken.
LIke This:
u01D1u072C          u0205|            u0205u072C          u0508           QC u04B90m
How can I set the language? How can I solve "Charancter Broken" ?
Plesse, let me know.
Thank you so much.
Edited by: Jaime White 999 on Nov 21, 2011 8:45 AM
Edited by: Jaime White 999 on Nov 21, 2011 8:46 AM

Hi Jaime,
Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both objpack-obj_langu = '3' & doc_chng-obj_langu = '3' instead of '3' please replace it with 'J'.
Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
Regards,
Gokul

When exporting my Indesign Layout with Images, the images disappear ?

When exporting my indesign layout the images disappear once exporting as a PDF print.
I have had several information bubbles appear claiming I need to alter my blend space due or colour settings ?
I have altered the blend space to rgb and still it does not work.
I have also unlocked all the layers in attempt for this to work.
My assignment is due in tomorrow and still I cannot get this feature to work
any help would be great !

CharlieLDavis1992 wrote:
When in preview mode they do not appear either.
If you understood my question and the images also disappear in InDesign when switching the screen to Preview mode, or Overprint Preview, that means they are set to non-printing in some way. Either they are on a layer set to non-printing, or they're set to non-printing on an individual basis in the Attributes panel.
>I am using the latest OS,
Not really helpful. OS X? Windows? Probably not relevant, as it turns out, for this problem, but you should be specific.
>The pdf appears in preview
Does that mean you are trying to use Mac Preview to view the PDF? If so, it may give you bad results. Mac Preview is not a godd general-purpose PDF viewer and is incapable of rendering complex PDF.
The first error dialog you show is what you would get when opening a file in ID that has different document color spaces than the default settings in your color settings file. That's not a problem, and to preserve the color appearances you would leave things as they are.
The second warning dialog indicates you are making an interactive PDF, which is RGB. If you are using CMYK images I don't think you'll avoid color shifts no matter what you do if you have transparency, but I don't do interactive PDF, so I can't give good advice here. If you are using RGB images, by all means your transparency blend space should be set to RGB.
Can you post a screen shot of the export dialog?

When I use "Email Link" with Firefox, the "send" button in Thunderbird is grayed out.

OS X 10.9.4
The option of manually copying the link and pasting would work, but I've always been able to use "Email Link" from the "File" menu until the last few days.
Restarting the computer did not help.

Do you have an address in the address field? The send button stays greyed out until there is something in the address field.

When sending group emails, those with 'xtra' addresses are not delivered.

I send out newsletters to many different people, and have just found out that all those with 'xtra' email addresses are not receiving their newsletters, although everyone else in the group is.

They aren't getting the newsletter at all, as in also not on their primary address?
Or are they getting the newsletter on the primary address, but not on the extra address?

When I click attach when sending an email with an attachment I get a dropdown that says "single image" or "default multiple". I choose one. Nothing happens as far as offering a choice as to what doc or photo to attach. What do i need to do?

When I click attach when sending an email with an attachment I get a dropdown that says "single image" or "default multiple". I choose one. Nothing happens as far as offering a choice as to what doc or photo to attach. I continue between the attach and attachment and still nothing .What do i need to do?

Hmmm, Permissions are messed up somewhere!?
Can you open to pic say in Preview, select All, Copy, 7 Paste into Mail?

HT4628 I am able to download updates and send and receive email so I know I have connection to my wireless router. However, when I click on Safari, I get the message "Safari quit unexpectedly." What is my problem and how do I solve?

When I click on Safari, I get the message "Safari quit unexpectedly." I know I have access to my wireless net work because I just found and downloaded updates and can send and receive mail. What is my problem and hoe is it solved?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

HT3529 WHEN I SEND A MESSAGE WITH VIDEO, THE PERSON RECEIVING THE MESSAGE HAS NO SOUND TO THE VIDEO .hOW DO I FIX THE PROBLEM..THANKS

WHEN I SEND A MESSAGE WITH VIDEO, THE PERSON RECEIVING THE MESSAGE HAS NO SOUND TO THE VIDEO .hOW DO I FIX THE PROBLEM..THANKS

is there sound when you play the video yourself?

When I send txt msgs from my phone the message shows on the recipients phone as if it came from my gmail account. What causes this? I'd like to correct this because when I receive their reply it sometimes shows up as an email.

When I send txt msgs from my phone the message shows on the recipients phone as if it came from my gmail account. What causes this? I'd like to correct this because when I receive their reply it sometimes shows up as an email.

I go into Messages there is a Send & Receive selection. My email address
is showing. I select Send & Receive and mu phone and email address is
there. A check mark is next to my email address. Is this the problem? I
was unable to remove my email address. I tried to remove my email address
but the response is "This email address could not be removed."
Thank you for your response. I will stand by for your next request or
instructions.
Steve
On Fri, Jun 27, 2014 at 10:54 AM, Verizon Wireless Customer Support <

Send Message With Attachment

Good Day
Experts:
I am looking to Send a message with an attachment from my AddOn code to a recipient.
For now, I am just trying to send it to myself here internally. I have spent time in the Help, Sample and the forum
with no luck. The Messages object and the Messages Services and I cannot get the code to send an e-mail.
Now, my SBO Mailer service is started in the SAP B1 Serve Suite Manager.
Here is my code for the oMessages object. This adds without error but I never get the e-mail. Is there somewhere I can check to see if the email got lost?
    Dim lErrCode As Long
    Dim sErrMsg As String
    lErrCode = Nothing
    sErrMsg = ""
    Dim msg As SAPbobsCOM.Messages
    msg = g_B1Connection.Company.GetBusinessObject(BoObjectTypes.oMessages)
    msg.MessageText = "This is the content of message"
    msg.Subject = "Hello manager"
    Call msg.Recipients.Add()
    msg.Recipients.UserCode = "manager"
    msg.Recipients.NameTo = "manager"
    msg.Recipients.SendEmail = BoYesNoEnum.tYES
    msg.Recipients.EmailAddress = "<email address>"
    Call msg.Attachments.Add()
    msg.Attachments.Item(0).FileName = "C:\NextBPCode.txt"
    msg.Add()
    g_B1Connection.Company.GetLastError(lErrCode, sErrMsg)
    If lErrCode = 0 Then
    Else
       UpdateStatus("Error sending email..." & sErrMsg & "", SAPbouiCOM.BoStatusBarMessageType.smt_Error)
   End If
Any help is appreciated as I have spent way too much time so far on this issue.
Thanks,
EJD

Hi Ed,
Your code works fine (I can send emails to an account with attachments using this code).
I'm assuming that you can send the message (and attachment) if you do it manually through the user-interface. If you don't get the message when you do it manually then check your SBO Mailer settings.
When you add a message in SBO you should see new entries in the OALR and ALR1 tables. The ALR1 table has a status column (U for unsent, P for pending, S for sent and E for error). If the status remains at U then your mailer is not attempting to send the email. If you get an E status then check the application log in Event Viewer as this should record a more detailed error message (and then check SAP Notes for the code). Also check your attachments path to see if the attachment has been copied across (attachment path is in the path tab of General Settings).
Kind Regards,
Owen

When i send an email in greek characters the receiver gets only questionmarks. how can i troubleshoot this?

when i send an email in greek characters the receiver gets only question marks. how can i troubleshoot this?

Microsoft has finally addressed this issue!
You need to download and install the 14.2.4 update (110MB) for Office 2011 from here: http://www.microsoft.com/en-us/download/details.aspx?id=34690
Unfortunately, if you have been lazy with updating you will also need to download:
Service Pack 1 (14.1.0), 247MB: http://www.microsoft.com/en-us/download/details.aspx?id=17198
[Service Pack 2 (14.2.0), 110MB: http://www.microsoft.com/en-us/download/details.aspx?id=29419 -> you don't have to download this]
Update 14.2.3, 110MB: http://www.microsoft.com/en-us/download/details.aspx?id=30214
These are all pre-required...
This update adds the ability to select a default text encoding for composing new messages.The encoding that is selected in composing preferences will be applied to all new messages that are sent from Mac Outlook. To access composing preferences, select Outlook, select Preferences, and then select Composing. The new preference is Preferred encoding for new messages. (From: http://support.microsoft.com/kb/2742588/en-us?fr=1 )

Sending an email as part of the process when clicking on the 'Save' Button.

Would like to learn how to do this:
Do you have a purchase card () Yes () No
~~~~~~~~~~~~~~~~~~~~~~~~~~
If the user selects 'Yes', I want to send an email as part of the process when the user clicks 'Save'.
But I also have an item, P2_EmailSent that I would like to flag as being sent, along with the date it was sent, P2_DateEmailSent.
Then, after a week (check P2_DateEmailSent) from date it was sent, send it again.
Please let me know if you need more details?

hi Zahid Khan,
as said i tried the same.
i have created a button "send" action :submit.
and also have created a process"send mail" with the folloing code
DECLARE
l_body CLOB;
BEGIN
l_body := 'Thank you for your interest in the APEX_MAIL package.'||utl_tcp.crlf||utl_tcp.crlf;
l_body := l_body ||' Sincerely,'||utl_tcp.crlf;
l_body := l_body ||' The APEX Dev Team'||utl_tcp.crlf;
apex_mail.send(
p_to => '[email protected]',
p_from => '[email protected]',
p_body => l_body,
p_subj => 'APEX_MAIL Package - Plain Text message');
APEX_MAIL.push_queue;
END;
and , Process Success Message as "done" and When Button Pressed (Process After Submit When this Button is Pressed): "SEND" WITH Process Point : "ON SUBMIT AFTER COMPUTATIONS AND VALIDATION"
The process is running.., getting the """success message""" but unable to""" get the mail""".(tried different combinations of mail ids)
any help !!!

When I send an iMessage to my husband the message is duplicated on my phone.

When I send an iMessage to my husband, the message is duplicated on my phone. How do I change this?

It is possible that your husband's AppleID is somehow associated with your phone. The reason I say this is that in this document
iOS: Troubleshooting Messages - Apple Support
the Opposite may be true regarding this section
If you aren't receiving iMessages across all iOS devices
Go to Settings > Messages > Send & Receive on each iOS device and make sure that you signed in with your Apple ID. You must use the same Apple ID on each device.
Go to Settings > Messages > Send & Receive > You Can Be Reached By iMessage At and make sure that you selected each phone number and email address you want to use with iMessage.
If you linked a phone number to your Apple ID with iMessage and the phone number hasn't appeared, follow these steps.
Sign out of your Apple ID in Settings > Messages > Send & Receive and Settings > FaceTime on all devices.
If you're linking a phone number to an Apple ID, sign in to iMessage on your iPhone first. Then sign in to the rest of your device one by one with iMessage and FaceTime.
Soooo, if you ARE receiving iMessages across all iOS devices - see what I mean?
Make sure that YOU are signed in as in #1, and try it again.
ÇÇÇ

When sending an email message with attachment, the message disappears.

Similar Messages

Maybe you are looking for