When sending, spelling checks old text

Is there any way to train Mail's spelling check to look at just new text before sending? When sending mail spelling check will run through old segments of the message that have already been checked for spelling.

You shouldn't be including much of the old messages anyway. If you are not directly replying to a specific statement, you should trim out all the old message. There's nothing so annoying as receiving mail from someone who leaves the entire original message in the reply, just hanging out, for no particular reason. Go to the following site, scroll down, and read the "Replying, quoting and forwarding" section:
http://www.penmachine.com/techie/emailtrouble_2003-07.html

Similar Messages

Call details when sending and recieving roaming text messages when abroad.

Is it possible to get the full number of roaming text messages that are sent and recieved whilst abroad ?

Only by checking your phone logs.
My O2 will just show the international call handling number.

When sending a gmail the text and jpeg attachments are scrambling

Does anyone know why this is?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I bought my Iphone 4 from Sprint. I have little or no internet service. When I go into extended network areas, my phone sends old text messages to my friends, repeatedly. Is this a Sprint issue?

I bought my I-Phone 4s from Sprint. The salesman raved about how much faster my internet would be with Sprint, also told me 4g was being added my area, and it would be even faster. Well now 4g is here. All of my friends on AT&T enjoy 4g, while I am only getting 3g, my internet is so slow, I rarely use it!
Last week I visited the Sprint store where I purchased my phone, to find out what the problem was. They told me NONE of the I-Phones were capable of getting 4g?????? Wow, Has anyone else been blatantly lied to by Sprint.
The other issue I am having is: every time I leave my home area, and go into the extended area network, and then return into my home area, my phone starts resending old text messages to my friends, that they had recieved days ago!. Of course the Sprint Personnel argued with me and said those were just messages that never went through the first time. I have screenshots of the duplicate messages from my friends, phones.
My I-Phone was great for the first 2 months. this month my I-Phone has completely quit 3 times, Sprint says a tower is down every time I call in to report it.
Is anyone else having these problems with the I-phone 4s?

You are not alone on issues related to weak signals. It happens to us all regardless of the carrier in the US.
I have an iPhone4, legally unlocked with replaceable SIM that I use here In Australia, the US and Europe. I simply replace the SIM to phone accounts in other countries. Do have issues at home here in Australia from time to time, but many more problems in the US than any other country.
When the signal is weak, ususally 1 bar the phone does not have enough power to stay connected. It will attempt to receive and send, but is trying to process so much that the signal cannot cope.
If any employee from Sprint, ATT or any other carrier attempts to tell you it is you and not their system they are out right lying. Just as they lied when they told you that the iPhone was 4G. Some try to get around the issue by saying 3GLite, but that really does not apply either because of the mobiles frequency range.
In fact the Australian government fined Apple AUD$2.25 million + $330,000 in costs for advertising that the new iPad was 4G and LTE, which it is not. There is currently another legal challenge over the iPhone4S.
If you have anything in writing from Sprint that says 4G then you need to contact your states attorney general. At least file a complaint with both Sprint and the FCC. If they tell you it is 4G then they either are lying or they do not have a clue to the mobile.
When the signal is weak the phone keeps attempting to send anything that you have sent. Sometimes that means multiple sends if the signal keeps dropping to low and it has to try all over again.
One way around the problem is by using an internet or data based app like Viber or WhatsApp. Both are voice, text and data Apps that will use Wi-Fi first then 3G if Wi-Fi is not available. Because they use the data side of your mobiles plan it does not take as much power or size to receive or send. Plus, because they are primarily Wi-Fi then data bases they do not use as much time or text units. You can find them online or through the Apple App Store.
Iv used Viber for years because I can use it overseas or talk, video, text or msg internationally without use of any mobile plan time.
Rember to that in the states you have I think 72 days to return a mobile to the carrier without any charges.
I use ATT in the states and when I am at home here I get almost no signal ... I depend 99% on Viber or WhatsApp to even talk.

My iphone 5 keeps on losing contact details and i am also having instances of old text messages being resent when I am actually sending newly written text messages help please?

My iphone 5 keeps on losing contact details and i am also having instances of old text messages being resent when I am actually sending newly written text messages help please?

My wife is having the same problems as a reciever. She works in a school as a teaching assistant and her teacher sends messages that are mixed with previous texts from ages ago.
Can anyone shed some light on this problem or is it only her and this poster?
2m42s

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave

How to set Default text when sending a blank mail from SAP

Hi all,
How to add Signature with company logo in the mail body.
User should see at least one default text (eg; Hi) in the mail body if the sender did not type any text in the mail body when sending a mail from SAP.
Is it possible to set like this on Subject also.
Kindly share your ideas.
Regards,
Mathan A

Hi Mathan,
Please check sap note
SAP Note No. 1304146 Email Signatures feature note
1163250 - How to Create an Email Signature on several rows
I hope it will solve your issue.PLease mark thread as answerd.
Best Regards,
Atul

CentOS based linux VM running on Hyper-v : Checking root filesystem fails when kernel switches having old PV(para virtualised driver based on 2.6.32 linux kernel) to new PV(which is equivalent to linux integration component 3.4)

hi all,
I am running a CentOS base VM on top of Hyper-V server. I upgraded PV drivers of Hyper-V in linux kernel 2.6.32 in order to support
Windows Server 2012, then i am hitting below issue on Windows Server 2008 when kernel switches from old PV(which is 2.6.32 based) to new PV(which is equivalent to linux integration component 3.4).i
am hitting following filesystem check error messages :
Setting hostname hostname:
Checking root filesystem
fsck.ext3/dev/hda2:
The superblock could not be read or does not describe correct ext2 filesystem. If the device is valid and it really contains an ext2
filesystem(and not swap or ufs or something else),then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
: No such file or directory while trying to open /dev/hda2
*** An error occurred during the filesystem check.
*** Dropping you to a shell; the system will reboot
*** When you leave the shell.
Also, when I go to the repair filesystem mode. I found out the strange behaviour when i ran those command :
(Repair filesytem) 1 # mount
/dev/hda2 on / type ext3 (rw)
proc on /proc type proc (rw)
(Repair filesystem) 1# cat /etc/mtab
/dev/hda2 /ext3 rw 0 0
proc /proc proc rw 0 0
(Repair filesystem) 1# df
Filesystem 1K-blocks used Available Use% Mountedon
/dev/hda2 4%
I think for all above command there should be /dev/sda2 instead of /dev/hda2.
Also my fstab , and fdisk -l looks like ok for me.
(Repair filesystem) 1# cat /etc/fstab
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
devpts /dev/pts devpts gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs defaults 0 0
LABEL=swap-xvda3 swap swap defults 0 0
(Repair filesystem) 1# fdisk -l
Device Boot Start End Block Id System
/dev/sda1 * 1 49 98535 83 Linux
Partition 1 does not end with cylinder boundary.
/dev/sda2 49 19197 39062500 83 Linux
Partition 2 does not end with cylinder boundary.
/dev/sda3 ......
Partition 3 does not ......
/dev/sda4 ......
Partition 4 does not end ....
(Repair filesystem) 1# e2label /dev/sda1
/boot
(Repair filesystem) 1# e2label /dev/sda2
(Repair fielsystem) 1# ls /dev/sd*
/dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sda4
(Repair filesyatem) 1# ls /dev/hd*
ls: /dev/hd*: No such file or directory
Kindly suggest any configuration of windows server or kernel configs missing or how to resolve this issues
Many many thanks for your reply.
thanks & Regards,
Ujjwal

i am not able to understand duplicate UUID and from where it is picking /dev/hda* ?
~
VVM:>>
VVM:>> Output of dmesg | grep ata contain substring "Hyper-V" ?
VVM:>>
it doesn't contain "Hyper-V" or ata related message and the output doesn't change with boot parameter reserve=0x1f0, 0x8
~~
~~~~
==
output of dmesg related "ata" Ubuntu v13.04 mini.iso ( with boot parameter reserve=0x1f0, 0x8)
==
see later ( in "good situation" example )
~~
===
Disable legacy ATA driver by adding the following to kernel command line in /boot/grub/menu.lst:
reserve=0x1f0, 0x8
. (This option reserves this I/O region and prevents ata_piix from loading).
==
See output of dmesg related "ata" Ubuntu v13.04 mini.iso ( with boot parameter reserve=0x1f0, 0x8) :
~~
[ 0.176027]
libata version 3.00 loaded.
[ 0.713319]
ata_piix 0000:00:07.1: version 2.13
[ 0.713397]
ata_piix 0000:00:07.1: device not available (can't reserve [io 0x0000-0x0007])
[ 0.713404]
ata_piix: probe of 0000:00:07.1 failed with error -22
[ 0.713474]
pata_acpi 0000:00:07.1: device not available (can't reserve [io 0x0000-0x0007])
[ 0.713479]
pata_acpi: probe of 0000:00:07.1 failed with error -22
~~
As result: 1) IDE disk handled by hv_storvsc , but 2) no CD-ROM device
==
~ # blkid
/dev/sda1: LABEL="ARCH_BOOT" UUID="009c2043-4bl7-4f95-al4d-fb8951f95b5d" TYPE="ext2"
==
~~
VVM>>
VVM>>Q1: Output of blkid contain duplicate UUID ?
VVM>>
-> blkid contains duplicate UUID, below are the output.
~~
This situation is classic problem "
use hv_storvsc instead of ata_piix to handle the IDE disks devices ( but not for the DVD-ROM / CD-ROM device handling)
~~
For compare, see example "good situation":
See output of dmesg related "ata" Ubuntu v13.04 mini.iso ( without boot parameter reserve=0x1f0, 0x8) :
~~~~
~ # dmesg |grep ata
[ 0.167224] libata version 3.00 loaded.
[ 0.703109] ata_piix 0000:00:07.1: version 2.13
[ 0.703267] ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
[ 0.703339] ata_piix 0000:00:07.1: setting latency timer to 64
[ 0.704968] scsi0 : ata_piix
[ 0.705713] scsi1 : ata_piix
[ 0.706191] atal: PATA max UDMA/33 cmd 0xlf0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.706194] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.868844] atal.00: host indicates ignore ATA devices, ignored
[ 0.869142] ata2.00: ATAPI: Virtual CD, , max MWDMA2
[ 0.871736] ata2.00: configured for MWDMA2
~~~~
===
~ # uname -a
Linux ubuntu 3.7.0-7-generic #15-Ubuntu SUP Sat Dec 15 14:13:08 UTC 2012 x86_64 GNU/Linux
~ # lsmod
hv_netvsc 22769 0
hv_storvsc 17496 3
hv_utils 13569 0
hv_vmbus 34432 3 hv_netvsc,hv_storvsc,hv_utils
~ # blkid
/dev/sr0: LABEL=”CDROM" TYPE="iso9660”
/dev/sda1: LABEL="ARCH_BOOT" UUID="009c2043-4bl7-4f95-al4d-fb8951f95b5d" TYPE="ext2"
===
( only CD-ROM and 1( one) IDE disk connected to ATA)
~~
regarding ata_piix.c patch . . .
As far as i understand this patch , it ignore ATA devices on Hyper-V when PV drivers(CONFIG_HYPERV_STORAGE=y) are enabled.
~~
Yes:
ignore ATA-HDD ( but not ignore ATA CD-ROM ) on Hyper-V when PV drivers(CONFIG_HYPERV_STORAGE=y) are enabled.
~
this patches need be backported:
cd006086fa5d ata_piix: defer disks to the Hyper-V drivers by default
and its prerequisite
db63a4c8115a libata: add a host flag to ignore detected ATA devices
~
~~
P.S.
Are You do this:
==
As temporary solution, increase on 1-2 Gb size all .vhd connected to IDE bus
( but not increase size of partitions inside disks)
==
? fsck write message a-la: "no error in file system" ?
2013-01-24 Answer by Ujjwal Kumar: As a temporary solution looks ok for me, but [ VVM: need true solution ]
P.P.S.
To Ujjwal Kumar :
My e-mail:
ZZZZZZZZZZZZZZZ
please send e-mail to me, in reply I send to You patches to ata_piix ( and *.c before and after patches) , etc.
} on 2013-01-14 -- DoNe

When sending a PDF, firefox sends a text / html

When sending a PDF, firefox sends a text / html.
They cant open the PDF there I send

Can you post a link?
IE usually does content sniffing to see which file is received, but Firefox require the correct MIME type and will display the file as text if the server sends the file as text/plain as many servers do in such a case.
You can check the HTTP response headers with the Live Http Headers extension.
*Live Http Headers: https://addons.mozilla.org/firefox/addon/live-http-headers/

Outlook 2010 Using a template to create an e-mail, updating it, reverting to orginal text in body when sending out

Hi all,
have a peculiar issue with Outlook not sending out a template that has been updated. Windows 7. Outlook 2010.
I created a template using HTML and saved it as an .oft in a folder on our network. When a colleague opens the template, she modifies the subject and portions of the body. Her editor is also HTML.
When she hits send, the text in the body reverts BACK to the original template text. The subject header DOES update. Very peculiar.
Any suggestions?
Muchly appreciated.
M

Hi,
Did you install any antivirus software on your computer? If so, please try to temporarily turn off them to check the result.
If it doesn't work, please try to open Outlook in safe mode to check if this issue is cuased by problematic add-in. To do this, exit Outlook, press Windows key + R to open the Run box, type
outlook.exe /safe and press Enter.
Here is a similar issue:
http://social.technet.microsoft.com/Forums/office/en-US/2d5043fc-66fa-4d37-9b37-ec37226b01d3/outlook-2010-templates-discard-changes-when-sending?forum=outlook
Regards,
Steve Fan
TechNet Community Support

Please move the 'SEND' and 'SPELL CHECK' options away from each other, and when sending, ask the question, 'Are you sure you want to send now?' Thanks

The send and spell check options are next to each other. I can not tell you how many times I hit the send button be accident. When sending, and question of 'Are you sure you want to send now?', should be asked.
Thanks

Actually, unless something has changed, you can set Thunderbird to run an automatic spell check when you click Send. That might be your best workaround.
Tools menu > Options > Composition panel > Spelling mini-tab
(You can display the classic menu bar by tapping the Alt key)
It might also be possible to customize the toolbar, but I think this might be safer.
Regarding a general confirmation for sending, I noticed some add-ons for that, but I don't have any personal recommendations.

Has anyone experienced an iphone 5 including content from an earlier text when sending a later text? Is there a fix ?

When sending an SMS text message my phone has occassionally included random sections of text taken from earlier messages . The message I have sent does not include this text in the stored message but the recipients does ? Is there a reason for this ? Is there a fix ?

So you have checked all of the home screens and the folder does not exist? I've not witnessed hidden folders. Try a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone reboots, see if you can locate it. If not, then you can go to Settings>General>Reset>Reset Home Screen Layout. This should remove all apps from folders and reset your home screens.

HT204380 FaceTime connects ok but rings out when sending call. But no sound when receiving incoming call have checked all the settings and sounds any suggestions

FaceTime connects ok and rings out when sending call but no ringing sound when receiving incoming calls

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Error code when sending text message

When sending a text message I receive an error code stating I need to enter a valid ten digit number. I enter the correct ten digits but still receive an error message. What can I do to fix?

Check Settings > General > Date & Time > Set Automatically = "On".
Check Settings > General > International and make sure all settings there are correct.

IOS 7.0.3 Email missing Text when sending photos by email

Hello,
I have recognized, that when sending a photo by email since ios 7.0 all text which is typed underneath the photo is not displayed by the revicer in his Email.
Also my signatures are missing.
When I check my outbox the Text is displayed correctly under the photos.
Before iOS 7, I had never such problems.
Does anyone else have theese problems?
Thanks for any hints.
Regards
Dominik

That doesn't work for me. First off, to reduce confusion, in iOS 7, it's General > Touch ID & Passcode > Reply with Message: On.
I've had this turned on since I got my 5S, but the Reply with Message function only appears for about a fifth of the phone calls I receive. I rarely see it. In each case, I have good cell reception, and it has nothing to do with who's calling, since I sometimes see it and sometimes don't for the same person. Another iOS 7 bug, I'm sure.

When sending, spelling checks old text

Similar Messages

Maybe you are looking for