When service PO is saved no xml generated for MM-SUS Service Procurement

Hi,
We have SRM 7.0 & EHP 6.0 (service pack 4) .
The settings are in place as per the below SAP Notes:
Note 1286936 - PI configuration for SRM - additional information
Note 1268336 - Business Suite 2008: Synchronous peer-to peer Services
For Service Procurement (MM-SUS), in XI we have configured Standard Integration Scenario "SE_Services_Procurement" which is available in Integration Repository. (Proxy-Proxy Communication)
We are facing issue while creating the service purchase order in MM-SUS scenario.
PO should transfer through XML as in XI config we have used proxies for both ECC & SRM, when creating PO xml not generated in SXI_MONITOR in ECC.
Please guide the config required in ECC to generate the XML
tnx in adv,
rgds,
balu

Hi Balu,
SAP Note 1268336 - Business Suite 2008: Synchronous peer-to peer Services, configuration in SOAMANAGER that you have done are for
1. creation of SRM RFx from within the ERP Web Dynpro applicattion "Collective processing of Purchase Requisitions (CPPR)
2. Central Contract Management (CCM)
This will not help us in enabling service procurement.
Have u found any documentation to enable generation of XML message in ERP once a service PO is generated?
Any progress from ur side? Could u help us with this issue.
Best regards,
Nikhil

Similar Messages

SOAP vs. XML-RPC for synchronous Web Services applications

Hi everyone, I have to finish one project soon and I have to make a decision. Because I don't have much time I want to ask if anyone can answer me, what are the major differences bettween SOAP vs. XML-RPC for synchronous Web Services applications. I'll be very grateful if you help me!
Thanks in advance!

Come on guys i know you can help me, please don't hesitate to write some row

Mapping DTO to XML Schema for Worship Web Service

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

Mapping DTO to XML Schema for Workshop Web Service

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

I have a number of DTOs that my application uses. This application
needs to consume a number of document style web services created in
workshop. When I generate the proxies for this web service, it creates
Java beans for the XML schema types defined in the web service.
Is there a way to get the workshop stubs to map my DTOs to XML schema?
If not, what is the best way to do this mapping? Thanks.
Mike

Warning on PO Saving: No message generated for output of purchasing documen

The following message is coming while saving the Purchase Order.
No message generated for output of purchasing document
Message no. 06261
Diagnosis
The system was not able to find a message record via the message determination schema. Therefore it was not possible for such a record to be generated for this purchasing document. In consequence, the purchasing document cannot be outputted (printed or transmitted).
Procedure
The message determination process should be checked and, if necessary, corrected.
The message record can be created manually for this document. For this purpose, choose the function "Messages" in the menu "Header" and maintain the necessary data.
Please guide.
Regards,
Aditi

Hello Aditi,
In messege determination necessary data is not maintained. Goto
MN04, select output type as NEU, then click on key combination and select the last option, then select document type as NB and FUNC as VN and put medium as 1 and in Date / time field 4, language EN and SAVE the data.
This will solve the problem.
Regards.
Sanjay

Labview 7.1 crashes windows XP when using VI's saved with the 'Save for Previous Version' option available in Labview 8

I am trying to work with a series of vi's developed in Labview 8 in Labview 7.1. The code was saved with the 'Save for Previous Version' option available in Labview 8. When trying to use the code in LV7.1 my entire Windows XP system locks up (cursor freezes). Are there any ideas what's going on and how to fix this?
Thanks for your help!
Mike

I have seen some problems with the save for previous option in the past. Instead of saving the entire hierarchy, try seperating the code into several different pieces and saving each piece individually. Then, see if you can open the different pieces in 7.1.
If that doesn't help, you should post some more details, like when exactly does it lock up, does it have things like DLL calls, and maybe attach the code.
Try to take over the world!

Cca xml export for SIP Trunk service providers, request or schema.

Hi
Please can I have the complete xml schema for SIP trunks so I can create a proper template?
Exporting from CCA 3.2.2 gives me an incomplete and sometimes inaccurate xml file
example: toll fraud protection - I would like to add this in to the template - how
SIP registration: If I set this to 120 on CCA and export - the exported template remains as 3600
thanks
Adam

Hi Adam,
Are you saying when you try to export your SIP trunk settings via CCA that your settings are incorrect in the xml file? If so, I recommend opening a case to troubleshoot the issue as it sounds like a bug to me.

When is a span with class lov generated for a Date Picker/Lov?

Hi,
can anybody tell me when a surrounding
< span class="lov">
is generated around the field and the icon of a date picker/lov and in which situations not?
Normally this span is always generated but I have already seen it in the past that the span isn't generated by APEX, but I'm unable to reproduce that anymore. Is it theme dependent? But item rendering can't be changed through the templates...
Thanks
Patrick

Hi Carl,
thanks for your response! Just got the confirmation that with Application Express 2.1.0.00.39 it isn't rendered for Page Item Date Pickers. That's why I can't reproduce it with my 2.2 installation. I already thought it's some setting of the page item/... which I don't see.
Thanks
Patrick

No XML generated for service PO when its saved-MM-SUS Service Procurement

Hi,
We have SRM 7.0 & EHP 6.0 (service pack 4) . integrating using PI 7.0
The settings are in place as per the below SAP Notes:
Note 1286936 - PI configuration for SRM - additional information
Note 1268336 - Business Suite 2008: Synchronous peer-to peer Services
For Service Procurement (MM-SUS), in XI we have configured Standard Integration Scenario "SE_Services_Procurement" which is available in Integration Repository. (Proxy-Proxy Communication)
We are facing issue while creating the service purchase order in MM-SUS scenario.
PO should transfer through XML as in XI config we have used proxies for both ECC & SRM, when creating PO xml not generated in SXI_MONITOR in ECC.
Pls suggest the config required in ECC to generate the XML
tnx in adv,
rgds,
balu

Hi,
We have SRM 7.0 & EHP 6.0 (service pack 4) . integrating using PI 7.0
The settings are in place as per the below SAP Notes:
Note 1286936 - PI configuration for SRM - additional information
Note 1268336 - Business Suite 2008: Synchronous peer-to peer Services
For Service Procurement (MM-SUS), in XI we have configured Standard Integration Scenario "SE_Services_Procurement" which is available in Integration Repository. (Proxy-Proxy Communication)
We are facing issue while creating the service purchase order in MM-SUS scenario.
PO should transfer through XML as in XI config we have used proxies for both ECC & SRM, when creating PO xml not generated in SXI_MONITOR in ECC.
Pls suggest the config required in ECC to generate the XML
tnx in adv,
rgds,
balu

Is crossdomain.xml Needed for SOAP Web Services?

A Flash developer who is attempting to use Flash to access a
SOAP web service provided on one of our servers says we need to add
a crossdomain.xml file to our server listing their domain as an
acceptable source. The SOAP service simply accepts some data and
returns a status. It doesn't make sense to me that we would need to
provide a crossdomain.xml file. If we did, all web services all
over the Internet would have to do the same to allow Flash to call
them.
If I am correct and the file is not necessary, then what else
in FlashPlayer might be blocking their attempts to access our
server? I don't know much about Flash, but I do know some sort of
security configuration files are necessary to allow SWF files to
access the Internet. Could this be what they are missing?

low_right wrote:
> A Flash developer who is attempting to use Flash to
access a SOAP web service
> provided on one of our servers says we need to add a
crossdomain.xml file to
> our server listing their domain as an acceptable source.
The SOAP service
> simply accepts some data and returns a status. It
doesn't make sense to me
> that we would need to provide a crossdomain.xml file. If
we did, all web
> services all over the Internet would have to do the same
to allow Flash to call
> them.
>
> If I am correct and the file is not necessary, then what
else in FlashPlayer
> might be blocking their attempts to access our server? I
don't know much about
> Flash, but I do know some sort of security configuration
files are necessary to
> allow SWF files to access the Internet. Could this be
what they are missing?
>
>
Yes, you need a crossdomain.xml file in place. When I do SOAP
calls to
a service not under my control I just write a proxy for it,
then I don't
need to have anyone add the crossdomain policy file.

Automatic xml generator for DPS

Hello i use a script that makes automatic folios for my devices. This script import my PDF files into Indesign.
Now i want that he makes a sidecar.xml with information what's in the PDF.
For example he must autofil the title.
Is there a solution for?
Kind regards,
Patrick

Hi praveen,
you can use the below procedure.
first create the an number range object using SNRO tcode
see the below example assuming ZGE057 as the number range object.
        CALL FUNCTION 'NUMBER_GET_NEXT'
          EXPORTING
            NR_RANGE_NR                   = '01'
            OBJECT                        = 'ZGE057'
          QUANTITY                      = '1'
           SUBOBJECT                      = '0001'
          TOYEAR                        = '0000'
          IGNORE_BUFFER                 = ' '
          IMPORTING
           NUMBER                        = P_LCL_TEXT_KEY
          QUANTITY                      =
          RETURNCODE                    =
         EXCEPTIONS
           INTERVAL_NOT_FOUND            = 1
           NUMBER_RANGE_NOT_INTERN       = 2
           OBJECT_NOT_FOUND              = 3
           QUANTITY_IS_0                 = 4
           QUANTITY_IS_NOT_1             = 5
           INTERVAL_OVERFLOW             = 6
           BUFFER_OVERFLOW               = 7
           OTHERS                        = 8
        IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
Regards
Anil Kumar K

Sidecar.xml generator

Good Morning.
I present to you the sidecar.xml generator for Adobe's Digital Publishing Suite.
This tool creates the sidecar.xml file for you after you entered all metadata for each article.
You can change the order of the articles by just drag-and-drop.
It is usefull for non-subscribers to DPS, who can only re-arrange folios with the sidecar.xml method.
It is a small website at:
projects.nordsueddesign.de/sidecarxml
Works in every modern browser. It uses many JavaScript, so use a fast browser, especially if you have a lot of articles.
I use it on my own and decided to release it to the public until Adobe comes out with a new Version of the Folio Builder Panel wich will then support re-ordering.
After you added some articles and metadata, click on "Generate sidecar.xml file" to get the raw text for your file. Paste the whole xml-content into a sidecar.xml file, put into it's own folder and import the folder with the "Import Multiple Articles" method. Then the metadata from sidecar.xml is pulled into your folio.
The generator creates a unique URL each time you make a change or click "save". With this (very long URL) you can come back later to the generator to make changes to your sidecar.xml file.
Please keep in mind that I made this tool in one day for myself. There might be some glitches when deleting articles from the list, always keep an eye on your data.
Hope this is helpful for some people working on folios as non-subscribers.
—Johannes

Just a heads up, that ther is a complete new version of the sidecar.xml generator up now:
The new version is not only built up from scratch, it supports a few new things
— importing any old sidecar.xml file for editing
— previewing in a simulated browse view (somehow accurate if you have "Helvetica Neue" installed)
— logic that prevents you from using incompatible settings
http://projects.nordsueddesign.de/sidecarxml/
I want to thank anyone giving me responses and to Tomasz Kuczborski for showing me his generator above in person, wich brought me on the idea of integrating a preview as well.
—Johannes

[svn] 3652: Fix for SDK-17328 - Package description missing when they' re set using Overviews_Base.xml

Revision: 3652
Author: [email protected]
Date: 2008-10-15 10:18:08 -0700 (Wed, 15 Oct 2008)
Log Message:
Fix for SDK-17328 - Package description missing when they're set using Overviews_Base.xml
Fix for SDK-17185 - Allow HTML chars to be set for footer string
Fix for SDK-17259 - Exception name missing when generating asdoc with @throw tag
QA: Yes
Doc: No
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17328
http://bugs.adobe.com/jira/browse/SDK-17185
http://bugs.adobe.com/jira/browse/SDK-17259
Modified Paths:
flex/sdk/trunk/asdoc/templates/asdoc-util.xslt
flex/sdk/trunk/asdoc/templates/package-detail.xslt
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

I believe I have found my solution!
I can currently boot with my bios in ide mode- but my raid1 mirror is showing as independent drives (c and d)
I do a simple windows search for winload.exe on the C: drive and get nothing
that same search on the D: turns up winload.exe all over
When I look at I my BCD 'device partation=C:'
shouldnt this be D:?
If so is this just a simple bcdedit, reboot into the bios, change my bios from IDE mode to RAID mode, save to cmos then, theoretically boot into windows with my raid correct (showing as a singe drive C: )
Please someone correct me if I am wrong
C:\>bcdedit
Windows Boot Manager
identifier              {bootmgr}
device                  partition=C:
description             Windows Boot Manager
locale                  en-US
inherit                 {globalsettings}
default                 {current}
resumeobject            {8b18c20b-c12d-11db-afc2-ac36bbabc8b2}
displayorder            {current}
toolsdisplayorder       {memdiag}
timeout                 30
Windows Boot Loader
identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.exe
description             Microsoft Windows Vista
locale                  en-US
inherit                 {bootloadersettings}
osdevice                partition=C:
systemroot              \Windows
resumeobject            {8b18c20b-c12d-11db-afc2-ac36bbabc8b2}
nx                      OptIn
vga                     No
quietboot               Yes

URGENT! SEGV-errors when using Oracle C XML Parser for Solaris

I often (not always) got SEGV-error with core dump when I use Oracle Oracle C XML Parser for Solaris. This Error is always got in the call of the the function xmlinit(...) with all params as NULL but the first required for the error code and the second which i assign a macro that evaluates to "US-ASCII". Does anyone knows about this problem?
I am using a very short, wellformed and validated XML document.
I would be very glad for some help about this!
null

Please provide a sample program along with the version number of the XML parser.

Loading XML parser for PL/SQL

I am working my way thru 'Building Oracle XML Applications' by Steve Muench.
I am getting a problem when I try to install the XML parser for PL/SQL
The following errors occur when I try to do
loadjava -v -r -u xmlbook/xmlbook xmlparserv2.jar
initialization complete
loading : oracle/xml/parser/v2/XMLByteReader
creating : oracle/xml/parser/v2/XMLByteReader
Error while creating class oracle/xml/parser/v2/XMLByteReader
ORA-29545: badly formed class: User has attempted to load a class (oracle.xml.parser.v2.XMLByteReader) into a restricted package. Permission can be granted using dbms_java.grant_permission(<user>, LoadClassInPackage...
loading : oracle/xml/parser/v2/PrintDriver
creating : oracle/xml/parser/v2/PrintDriver
Error while creating class oracle/xml/parser/v2/PrintDriver
ORA-29545: badly formed class: User has attempted to load a class (oracle.xml.parser.v2.PrintDriver) into a restricted package. Permission can be granted using dbms_java.grant_permission(<user>, LoadClassInPackage...
resolving: oracle/xml/parser/v2/PrintDriver
Error while resolving class oracle/xml/parser/v2/PrintDriver
ORA-04043: object /a065289c_PrintDriver does not exist
resolving: org/w3c/dom/html/HTMLAnchorElement
Error while resolving class org/w3c/dom/html/HTMLAnchorElement
ORA-04043: object /564607d_HTMLAnchorElement does not exist
About 20 classes get loaded correctly. All the rest get ORA-29545 or ORA-04043 errors.
I expect the ORA-04043 errors are a result of the earlier errors.
The documentation seems to indicate that there is no need to do
dbms_java.grant_permission to load into your own schema.
I have NT4 (sp6)
Oracle 8.1.7
xmlparserv2.jar dated 24/8/2001 17:01 size 1,177,259
xmlparserv2_2027.jar gives the same errors.
Any help would be appreciated.
null

Was it definitely xmlparsev2.jar that you had to load?
I recently started going through some of these examples as well and found that the standard xml parser was there but that I needed to load the xml parser for PL/SQL. I did this using loadjava from a subdirectory within the xdk directory and everything worked fine.

When service PO is saved no xml generated for MM-SUS Service Procurement

Similar Messages

Maybe you are looking for