When setting up an aux send and returning it to another bus, when you solo the aux bus it solos the entire return bus with all other channels mixed in.
when i set up a aux send for parallel compression from a snare drum input channel to two aux busses—one for a compressor and a second aux bus for the limiter—and send the outputs of the comp/lim aux busses to the drum buss everything works fine. However, when I solo the comp/lim aux busses the entire drum mix is in the solo as well. Is there an alternative routing scenario?
You still refuse to discuss data versus radio signal.
So, I guess that is that. You have no proof to back up your contention as neither do I.
Granted, from the g device to my Express, it is at g speeds. But, I contend, that once that g radio signal is converted back to data only (now at speed of light) inside the Express, the Express sends that data, via the exclusive “Extended network” connection, to the Extreme, at n speed. It has to as the Extreme will only take n speed.
Sure, it is splitting hairs, if I am right. I am not saying I am. But my idea (before our branch debate on g and n signal versus data upon arrival at the Express) is an interesting way to force old g clients to use only one router. But to force those pesky g clients to use the newer simultaneous dual band Express by setting the Extreme to 5GHz g only was a new solution for me. It worked too. In that case, it is not about minute speed gains or losses but simply letting the g clients have their one party at the Express, which can handle them better when part of an extended network with an older, original Extreme.
It is also far better to just have one Wi-Fi router as, adding Airport routers in an extended network, slows things down 60% or less and requires more "data management overheard", according to Apple*.
It is interesting that they said data management overhead and not radio signal management?
Alternatively, using the “Roaming network” method where the two stations are linked via Ethernet, is an even better option.
* https://support.apple.com/en-gb/HT202056
Similar Messages
-
Help! We have a form with more than 200 entries and when I looked at it yesterday it had one! When you download the form to excel they all show up. However, when I added another record today it disappeared. Can you tell me what's happening? I've been using adobe forms for 2 years with mass response feedback and have never had this problem.
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
When I uncheck the "Print" on layer options, all other layers disappeared!
Hi, I received a ai file from one of my clients, she set one of the layers to be not printing just for place holder. And I coudln't see any layers, originally I thought might be the graphic or fonts she's using, so I recreate the file tried to found out what font or graphics. But after I double click the layer, call out the layer options to uncheck the Print, it mess up the whole layer panel. I chatted with Adobe yesterday, the girl asked me to delete my font management plug-in and try. It didn't work. After that I was on hold with another girl from Adobe for 40 mins, she put me on hold most of time, phone got disconnected, never call me back. I was on my 3rd call with them, wait for another hour still didn't get to sort it out. I waste my whole day without getting the answer. Very frustrated.
I set the cyan circle on the bottom layer with uncheck print setting, after I click ok, on the layer panel every layers are gone. But I still see all the graphics.
Please help, I'm waiting Adobe to call me back in another hour. And it would be my 4th call with them.
Thank you and sorry with such a long question.hello, could you go to the firefox ''menu ≡ > help ? > troubleshooting information'', copy the contents of that page and paste them here into a reply on the forum? this might give us a clue what is going on...
-
I set up a new folder for an email sender and now my emails are not able to use the rules that I set up. What can I do to enable them again.
I don't seem to be able to copy a rule, but, this is how one rulel displays.
Name of Rule is Richard Cryar.
If any of the following conditions are met:
From contains rcryar@auduboncapital
Move message to Richard Cryar mailbox
Not only does this rule not work, but all emails are going into the new box I created and not to the inbox. -
I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.
What happens when you try to connect?
Error messages?
Does the iPod see the network?
Have you tried other networks?
See:
iOS: Troubleshooting Wi-Fi networks and connections -
I reset my iphone 5 and went to set it back it up and it says it has to be registered in the developer account. I do not have one of these. PLEASE HELP!!!
It's beta. It's no where near ready for prime time. It's put out there so that developers can start getting their products ready fo the new release.
I've been working in IT for over 25 years. People have gotten the wrong idea about what a beta is thanks to the likes of google, who release a product to market and call it "beta" just so they don't actually have to support it. I've beta tested operating systems going all the way back to OS/2 when it was still a joint Microsoft/IBM project. Believe me, you do NOT want beta versions of operating systems getting into the hands of the unwashed masses. It would quickly turn from 'getting rid of bugs' to outright revolt. -
The 'items' I refer to are the various articles in the blog 'The Corner'. The 'problem' occurs on any of NRO's blogs, i.e. 'Bench Memos', 'The Campaign Spot', etc.
The point is that if I, from the NRO home page, select 'the Corner', the back arrow key should point then to NRO home, no matter how far down into 'the Corner' I read. As it happens, however, every discrete item inside the blog posts its own pointer to the history and one ends up with multiple repetitive pointers to the Corner, rather than to one NRO home.All,
I haven't looked at that tutorial for quite a while but just gave it a quick look.
Further down in the tutorial, it directs you to set the value of P7_PREV_PAGE, under Add Functionality to Support Adding Multiple Issues Sequentially - have you done that? There is also a mention that there is more branching to be done - "The branch you just created is looking for a value in P7_PREV_PAGE. Since the page was not called from another page, the value has not been set. You need to fix that next." It goes on to have you define that value from other places.
Can you describe what you are doing when you get the error? There could be something missing from the tutorial. A way around it would be to create a default value for P7_PREV_PAGE so that if it is not set, a default page will be used.
-- Sharon -
I am running OSX Lion 10.78.4 and the computer will no longer go into sleep mode when I close the cover. In system preferences I can no longer find the option that allows for this energy saving feature. What happened to this option and why is this no longer happening with the latest version of Lion?
No external monitors or devices attached. When you mention that this function only works when devices are attached that is true when you set up your preferences that way. Up until my upgrade to Lion the computer would always go into sleep mode when I closed the lid. There also used to be an option to check in system preferences that allowed you to choose this option. My question for the discussion is what happened to that option and how do you get the computer to sleep or at least the display to sleep when you close the lid as we have been able to do in the past. Thanks.
-
how do you get your old scores on your games when you transfer the games between devices ive signed into game center and my scores are there but when I open the games Im at 0 again
Did you do this?
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
why does it tell me my ipad is synched with another itunes library and wants to erase the thing when I want to synch it? I haven't synched it with any other mac but my own.
Hi Lisa,
I know from experience that this must be a frustrating situation for you especially if you don't want to loose the music/video content that is currently on your ipod. Unfortunately though you may have to consider re-syncing it as it thinks its currently synced with another computer.
If you bought any music that is on the ipod through itunes you can opt to right click the ipod in itunes and 'transfer purchases' if you authorise your library in the 'Store' menu in itunes. Some reasons for this happening may include some of the following:
Deleting and reinstalling your itunes on the computer.
Removing the account you had on the computer you used itunes in and making a new one. (User account, eg: Lisa).
Changing computers in the past.
A friend or family member syncing it on their computer to give you there music.
A sign of a failing iPod.
Alternatively you can opt to not sync it and keep the music that is on your ipod there but this means you will never be able to update your ipod.
Hope this helps! -
Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help
Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks
Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz -
About a month ago a song randomly appeared in my songs list and when I tried swiping to the left to delete the song it wouldn't slide over to show the delete button. The delete slide appears with all of my other songs except that one. The ICloud songs are turned off and it wasn't iTunes Radio. 2 more songs like this have appeared and I can't delete them from both my iPhone or my computer (they don't even show up on my computer). If somebody knows how to fix this that would be amazing! Thank You.
Have you:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If a PC
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
AnnalisaDon't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?
More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed
Maybe you are looking for
-
HT1212 tried all of these, ipod won''t turn on but won't go to password to sign in
ipod touch won't turn off , says it is disabled, won't give me the sign in screen to put password, won't connect to itunes because of password
-
Trouble with making playlists on iPhone 6 plus running iOS8,please help!
Iphone6 plus 128G IOS8.02 IInitially I restored my phone from my previously used iPhone 5 that was updated to IOS 8.01 backed up the same day I got my iphone 6 plus. It stalled when installing the 2nd out of 400 apps. I had already hit the "X" butt
-
HI Friends My scenario is MY warehouse is a open storage and the material is stored one above another in the entire warehouse. To remove any material the only possible way is to remove from the topone. There is no rack or shelf So i created as a sin
-
Can any one please send me approximately abt the below question
interview person asks where ever i go how many comapny , company codes, sales org , dis channel , divisions , can some one tell me wt is the approximately figure i can say , plz dont say depnds on client , approximately plz , thanks in advance for th
-
Question about DVD to iPod transfer
Hello, I used these programs and these steps.... http://www.videora.com/en-us/Converter/guides.html#1000 to rip a DVD and then start to convert it. I am using the Videora Converter and it says the job is 100 percent done. However, it hasn't saved the