When should I stop trying to fix iPhone5?

Hello
Turns out my jacket isn't waterpoof.
Left iPhone for about 36 hours in rice and plugged into mains. Started to boot and received a text message. As the screen was still watery, I unplugged it and left for a further 48 hours. Plugged into mains, it booted up and screen was still watery. Left again for 24 hours.
iPhone now stuck in reboot loop when plugged into mains - only a few seconds of Apple logo. Tried leaving it plugged in for 24+ hours, still rebooting. Tried holding power and home and message appeared plug into iTunes. Plugged it in and nothing. Tried holding down power and home when plugged into computer, but nothing at all.
It's 20 days since it got wet and I've Googled and YouTube lots, but to no avail.
Any suggestions?
Thanks in Advance

Between being still wet, and energized multiple times, it almost certainly has suffered permanent damage from shorting circuits. I would just get a replacement at this point and be done with it.
As mentioned, either an AppleCare+ accidental damage claim, if you can do so, or pay the out of warranty replacement for a like new service unit.

Similar Messages

ITunes 7 is a joke stop trying to fix what isn't broken

iTunes 7 is a joke stop trying to fix what isn't broken

Between being still wet, and energized multiple times, it almost certainly has suffered permanent damage from shorting circuits. I would just get a replacement at this point and be done with it.
As mentioned, either an AppleCare+ accidental damage claim, if you can do so, or pay the out of warranty replacement for a like new service unit.

My iPad Mini was locked up today (for the first time) on a boot screen, with a Debugger Message: Panic. Should I bother trying to fix, or return to store?

My iPad Mini locked up for the first time today. A boot screen, with among many other things, a Debugger Message: Panic. Is there a fix for this even though I can't seem to even get it to reboot past this error, or am I wasting my time and need to return it?

if it is still within the return period, return it. Why try and fix a new iPad.

Write behind cache, DB down, when should the system stop taking new data in

Hello:
We are trying to use Coherence for our custom ESB, which is brokering payloads of various size between consumer and provider applications.
Before Coherence, stopping our DB meant organization-wide outage for critically important business services.
Since we have at least 40G of RAM in production environment, we believe that our app
can use Coherence write-behind option for tolerating at least several hours worth of DB outage.
We are currently using a near cache backed by distributed cache in write-behind mode.
9 business service JVMs (storage enabled=false) use 30 storage enabled JVMs.
IMPORTANT: We need to create an automated alerting facility determining when
amount of unsaved data reaches critical level since DB goes down. This alert should help us decide when our application stops accepting inbound traffic.
It is hard to use QueueSize parameter for that because our payload memory footprint can vary from 1KB to 3MB.
We do not expire any entries in order to enable support queries against the cache during DB outage.
Our experiments with trying various flavors of overflow-scheme resulted in OutOfMemoryError, therefore
we decided to implement RAM-only cache as a first step.
<near-scheme>
<scheme-name>message_payload_scheme</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>limited_entities_front_scheme</scheme-ref>
<high-units>100</high-units>
</local-scheme>
</front-scheme>
<back-scheme>
<distributed-scheme>
<backing-map-scheme>
<read-write-backing-map-scheme>
<internal-cache-scheme>
<local-scheme>
<scheme-ref>limited_bytes_scheme</scheme-ref>
<high-units>199229440</high-units>
</local-scheme>
</internal-cache-scheme>
<cachestore-scheme>
<class-scheme>
<class-name>com.comp.MessagePayloadStore</class-name>
</class-scheme>
</cachestore-scheme>
<read-only>false</read-only>
<write-delay-seconds>3</write-delay-seconds>
<write-requeue-threshold>2147483646</write-requeue-threshold>
</read-write-backing-map-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
</back-scheme>
</near-scheme>
<local-scheme>
<scheme-name>limited_entities_front_scheme</scheme-name>
<eviction-policy>LRU</eviction-policy>
<unit-calculator>FIXED</unit-calculator>
</local-scheme>
<local-scheme>
<scheme-name>limited_bytes_scheme</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<unit-calculator>BINARY</unit-calculator>
</local-scheme>

Good info ... I feel like I need to restate my original question along with a couple of new questions caused by the discussion above.
Q1. Does Coherence evict 'dirty', or 'queued', or 'unsaved' objects for cache configuration provided above?
The answer should be 'NO', otherwise Coherence is unsafe to use as a system of record,
it should not just drop unsaved information on the floor.
Q2. What happens to the front tier of the near+partitioned write behind cache described above when amount of unsaved data exceeds max cache capacity defined via high-units?
I would expect that map.put starts throwing exceptions: cache storage is full, so it should not accept more data
Q3. How can I determine a moment when amount of dirty data in bytes(!), not in objects, hits 85% of
max allowed cache capasity configured in bytes (using high-units param and BINARY calculator).
'DirtyUnits' counter can probably be built with some lower-level Coherence API. Can we use
this API?
Please, understand, that we purchased Coherence for reliability, for making our
system independent from short DB outages, for keeping our business services up
and running when DBA need some time for admin operations like rebuilding an index.
Performance benefits are secondary and are not as obvious for our system which
uses primary keys only and has a well-tuned co-located Oracle back-end.
We simply cannot put Coherence to production unless we prove that Coherence
can reliably hold the data and give us information about approaching crisis
(the cache full of unsaved data).
If possible, forward this message to Cameron Purdy,
who was presenting Coherence to our team several moths ago.
Thanks,
Vasili Smaliak
Applications Architect, Enterprise App Integration
GMAC ResCap
[email protected]

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

I broke my iphone 4s screen, then i tried to fix and replace it by myself. unfortunately, i cannot do that verey perfect, and i damaged my wifi part and the shut off button. now, i want to repair those 3 \problems. what should i do? how much will be cost?

i broke my iphone 4s screen, then i tried to fix and replace it by myself. unfortunately, i cannot do that correctly. i also damaged my wifi parts and shut off button. and my new screen is very hard to drive and use. i really want to repair those 3 problems. what should i do? how much money will be cost?

Hello!
When there is unauthorized modifications on the iPhone Apple doesnt replace the product. Unfortunately you will need to get a new iPhone!
If you could have contacted Apple when you broke your screen you would be eligible to get a replacement after paying the Out of Warranty service fee.
All the best!
Burcu

Hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim c

hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim card it says that simcard not recognized. I tried all the solutions in the net but nothing seemed to work. What should I do? I'm located here in the Philippines. I hope you could help. Thanks!

I know. I was with my brother when we did this. He didnt clearly understood the question that poped-up. Regarding the simcard, after successfully restoring it on itunes my simcard won't work. I'm not able to send and receive calls and messages.
hi, I was about to reset my iphone3g when I accidentally selected erase all contents and setting. It was stucked with the iphone logo, so i tried to fix it by restoring all my datas in iTunes. I was able to successfully fix it but when I inserted my sim c

When Creativ Colud is trying to install any programm the loading bar stops at 42% also if i am waiting some hours the loading bar remains at 42%

When Creativ Colud is trying to install any program the loading bar stops at 42% also if i am waiting some hours the loading bar remains at 42%
I tried to deinstall the creativ cloud and install it again but this doesn´t help.
Can someone help me ? pls
Sry for my bad english I am german. I hope you could understand me

It could be that previous installs or your system is causing an error. See if running the Adobe CC Cleaner Tool application on your system and running a fresh install fixes the issue.
Start by restarting your computer, don't launch any applications, if applications automatically launch quit them all. This includes the Creative Cloud desktop application.
To quit out of the Creative Cloud desktop application - refer to the following link: Creative Cloud for desktop FAQ
You are now ready to run the CC Cleaner Tool – See the following page for information: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
If that doesn't work let us know and also provide a bit of information about the system you are using. For example are you on a Mac or PC, what operating system version (e.g. Windows 8.1, or OSX 10.10 etc). So we can review possible system related issues.

Well my iPod is the 2nd generation and i had to update it, but when i did i tried to put one of my pictures as the wallpaper but it didn't work. How can i fix it?

Well my iPod is the 2nd generation and i had to update it, but when i did i tried to put one of my pictures as the wallpaper but it didn't work. How can i fix it?

http://support.apple.com/kb/ht3406

Soundtrack Pro Shuts down when trying to fix analized Action

Soundtrack Pro Shuts down when trying to fix analized Action

Thanks, I'll have to give that a try if there isn't an easier answer out there somewhere. If I pull the card will I have to reload the software and drivers?
If my project is saved and I have a copy of the project saved will I be able to reload Adobe without losing anything? What I mean is will I be able to just import my whole project once reloaded?
I just don't understand what could have happened, since I was doing this with no problem a couple of days ago.
Thanks for your help, it's greatly appreciated.
Tim

After updating my iphone 5s to IOS 8.0.2, I cant get internet on my 3g anymore. Can only get it when hooked to wifi. Tried restore, tried restart, fixed settings. Help?!?!?!?!?

After updating my iphone 5s to IOS 8.0.2, I cant get internet on my 3g anymore. Can only get it when hooked to wifi. Tried restore, tried restart, fixed settings. Help?!?!?!?!?

Hi diamondjill419,
Here is an article that can help you troubleshoot this cellular data issue:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

After having shut down after installing updates, when I restarted and tried to open a word file, it started opening ALL the word docs and the only way I could stop it was by"force quit" arted and tried to open

After having shut down after installing updates, when I restarted and tried to open a word doc, it started opening ALL the word docs and the only way I could stop it was by"force quit" . This is REALLY annoying!!

May be it is the Resume feature.
System Preference > General > Number of recent items
Uncheck the box next to "Restore windows when quitting and re-opening apps".
Best.

My phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

my phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

I have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and i

hi can anyone help please ? i have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and iphone / ipad but can't get it to work, they say discoverable but just will not connect to one another. I also tried the connection code and tried without one ... NO JOY ... Is this common or am i a twit ?

You can't connect an iPhone or iPad to a Mac via Bluetooth, except for Internet tethering.
You're not doing anything wrong - it just isn't a feature of iOS devices.
What were you hoping a Bluetooth connection would allow you to do?

I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50). How do I fix this?

I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50). How do I fix this?

Try restarting everything and then try to sync or reactivate. Quit iTunes, reboot your computer, reboot your iPad and then try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

When should I stop trying to fix iPhone5?

Similar Messages

Maybe you are looking for