When simulating a circuit, how do I display current and voltage on the circuit?

Hello, how do I get Current and Voltage to display on the circuit design without using meters?

saxyman123,
You can use probes (yellow instrument towards the end of the instruments toolbar) and then set the properties. You can choose to display just current and voltage.
Regards,
Pat Noonan
National Instruments

Similar Messages

How to read three parameters for exemple temperature,current and voltage from the same port with visa read and separate them in a table

Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.

[email protected] wrote:
Hi i want to read parameters with visa read, from three sensors related to pic16f877a, using module xbee ..but i want to make every one from those parameters (temperature, voltage and current) in a table ..it's the first time i use Labview so i don't know if ther is a solution for my problem so if any one have any idea please help me. thnx in advance.
The short answer is: "Yes, of course." But you are going to have to do the legwork and learn LabVIEW basics before we can offer meaningful help.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How to measure current and voltage and rpm with daq device

i am measuring current and voltage and am wondering should i use shunt resistors or current sensors hall effect sensors. i have a pci 6221 and a scc-68 breakout box. what specifications or size should the shunt resistor/current sensor be or should i use another device to measure the currrent and voltage. do i need any other safety device between the resistors, current sensors and the scc-68 breakout box when measuring the current and voltage. will the daq card pci 6221 pick up a signal from the resistor. what terminals should the wires from the resistors and current sensors be connected to in the scc-68. i am using a proximity switch to measure rpm of a motor. should the proximity switch be 2 or 3wire connection. should it have an analog or digital connection and is a power supply required to power the proximity switch and should it have an npn or pnp connection

hello,
i was going to use a 20amp 50mv, or a 20amp 100mv current shunt and connect wires directly into the AI input terminals of the scc-68 from the current shunt would these be suitable. would current shunts such as these be suitable to use http://uk.farnell.com/elc/sh10020/shunt-sh10020-20a-100mv-1-class/dp/1319576 or http://uk.farnell.com/datel/3020-01098-0/shunt-50mv-20a/dp/1339338
is it ok to use either a current shunt or should a hall effect sensor be used such as this http://ie.farnell.com/honeywell-s-c/csla2cd/sensor-hall-effect/dp/1082269 . which of them would be more accurate or are both of them fairly accurate.
when i am measuring voltage can i connect two resistors between the positive and negative of the wires going to the battery and connect two wires from either side of the resistor directly into the analog inputs of the scc-68 and measure the 12-15 volts directly would the pci6221 and scc-68 be able to measure the voltage drop across the resistor.
i wanted to measure rpm also does it matter whether the proximity switch has 2 or 3 wires and should it have an analog or digital/frequency output for cponnecting to the scc-68

How can I display current iPhone GPS coordinates using compass app

How can I display current iPhone GPS coordinates, when traveling overseas with no access of data or wifi
using "iphone compass app"(Both the latitude and longitude) ??
if iphone compass app require any sort of data
what alternative would there be? (to document the coordinates)?

Hi
Iphone 5s 16 gb 8.1
My fone freeze whenever i charge my fone its appear white screen with apple logo.. and as soon as i try to press hold home and power button
it shows battery drained sign>> i m facing this problem from last one week
and itunes also not getting cconnected
can any1 please help me out
sorry for poor english

I bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

i bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

You need to Set Up the iPad... Connect it to iTunes...
See here for Getting Started...
http://www.apple.com/support/ipad/
and here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

HT4759 When i enter my apple id , a massagd appears and says that the maximum apple id use in this iphone, how i can enter my apple id on this?

When i enter my apple id , a massagd appears and says that the maximum apple id use in this iphone, how i can enter my apple id on this?

If you are entering an Apple ID in Settings>iCloud which has not yet been used to create an iCloud account then the phone will attempt create a new account.
However the maximum number of iCloud accounts that any one device can create is limited to three - this is tied to the hardware and can't be bypassed. If you've already somehow created three iCloud accounts then you would have to create a new one on another Mac ior iOS device, and then you could sign into it on this phone.

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

How do I type Hebrew and English on the same page

How do I type Hebrew and English on the same page in Indesign?

What version of InDesign are you using? And on what operating system? Switching keyboard ("input methods") is in your OS, not in InDesign. InDesign has had the capability to display right-to-left languages since CS4, but only the Middle East edition has the abilities to actually manipulate Hebrew text. If you're trying to do a bilingual, bidirectional document, you'll need the ME edition. If you are a CC subscriber, it comes with your subscription; if you are not, you'll need to buy another version of ID, or a plugin that will allow you to access those RTL features.

I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife now wants to change the Apple ID on the 13" to her Apple ID. How do I do this and not loose the information on that computer?

I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife uses the 13" and now wants to change the Apple ID on the 13" to her Apple ID. How do I do this and not loose the information on that computer?

Hello Teddy53149 and welcome to Apple Support Communities,
Follow this procedure:
Change your OS X account name and home directory name - Apple Support
As they recommend and as always when you're messing with administrator accounts back everything up first.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password. I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes. Please help.

Can anyone tell me how to setup odbc driver and configure in the setup

Can anyone tell me how to setup odbc driver and configure in the setup

You can't switch languages in OS X programs, just in the OS itself. Insert the Leopard OS X disc, and choose your new preferred language when prompted.

How to get customer number and name from the SD document

Hi All,
Can you please let me know how to get Customer Number and Name from the SD Document?
Thanks a lot....
Anil

Hi,
It will be displayed in the SD (BIlling document) itself, you clikc on the VF03. The customer name and number will also appear in the SO document also Tcode VA03
regards,
radhika
Edited by: kolipara radhika on Jul 10, 2009 5:32 AM

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

How do I export words and definitions from the glossary widget in C7?

How do I export words and definitions from the glossary widget as XML? I need to use the same glossary in several projects. When I copy and paste the widget to a different project about 1/2 of the definitions disappear. Figured I would try exporting the words then importing them back in new glossaries in each project. Using 7 on a Mac.

Yes i read, and the answer to the main question is still the same, you cannot export, you just can import definitions if you previously have structured them into an xml file. So, first of all it would be useful to warn the user to ALWAYS start from an xml file BEFORE starting populating the glossary. Furthermore, not all users are supposed to manage easily an xml editing, and the widget itself has been programmed to insert the definitions with a simple method, so it would be necessary also to have an instrument to export to xml for importing purpose. Storyline has the same lack, you cannot move glossary from one project to another but you are forced to start from an old project or insert the glossary itself into a master project. You will agree with me that an xml export feature is not something so difficult to add for the widget. In my personal example, i added about 200 definitions, then i discovered that the glossary of captivate 7 does not work well in html5, the new one in captivate 8 is little bit better, but still not working on chrome (at least on ipad it shows, but you cannot show a button over it since it goes always on the top of everything, so at the moment i inserted a big transparent square behind it to close everyting like a lightbox). This widget is still very buggy and need to be improved.

HT5622 Do you think that apple would exchange my ipod gen 5 for another one because this one well, the screen isn't broken but the inside is half black and other colors? When it happened it was in its otter box, and i lost the receipt and got it on may?

Do you think that apple would exchange my ipod gen 5 for another one because this one well, the screen isn't broken but the inside is half black and other colors? When it happened it was in its otter box, and i lost the receipt and got it on may? How much do you think it would cost please help me.

If covered by warranty. See:
Apple - Support - Check Your Service and Support Coverage
Then if the iPod is within warranty, not abused Apple will exchange it at no cost. You can do it at an Apple store
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When simulating a circuit, how do I display current and voltage on the circuit?

Similar Messages

Maybe you are looking for