When Skype is open on my second monitor, my .swf runs slowly (30-45 fps).

But when it is minimized or on my first monitor, my .swf runs fine. I'm using Flash Player 11.5.31.137. Upon further investigation in Stencyl it seems every 4 frames something called "Waiting For GPU" spikes up WAY past my limit of 16ms. I am not using Stage3D, either.

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Similar Messages

Full screen playback on second monitor results in having to force quit Premier if a window opens on the second monitor.

Run into this problem a few times now. If I have full screen playback going to my second monitor, and then I try to do something like link media and the link media window opens on that second monitor I can't figure out a way to get to it. I end up having to force quit. Because the link media window causes all other application buttons to disable while it is open I have not been able to find a solution other than force quitting, reopen and disable full screen playback, open link media window and move it to the other monitor and then again enable full screen playback.
Has anyone run into this? Am I missing an easy solution?

You need to set up your Graphics Card Application first eg A and B Monitors , side by side etc.
In my case..a NVidea Display Application does this from the Control Panel
Then the second monitor will appear in display setting (Premiere).
My second monitor is entirely dedicated to full screen playback display.

On a Mac with two monitors, how do I get a new FF window to open on the second monitor? I can do this on a Windows XP box easily enough but on a Mac FF won't remember the position of a new window. Please help!

I proof websites for a living and workflow is everything. On my 26" main monitor I have FF running the job tracking web site. In this site, there are links to the sites I need to proof. I would like to be able to right click on a URL and select 'open in new window' and have that window open up on my second monitor.

Here's some more info about the router settings:
iOS: Recommended settings for Wi-Fi routers and access points
You should be able to get into the setup of your router by typing the IP address into your browser.
Depending on your router security setup, you might need the MAC address of your iPad, to allow access to your network, if the so called MAC filtering is active.
You can also check the name of your home network if your click on the AirPort icon on your desktop of your MacBook.
And here's a Wi-Fi assistant to get you going: http://www.apple.com/support/ipad/assistant/wifi/
Message was edited by: Ingo2711

Automatically open AI on second monitor

I have this working in PS, but not AI. I opened up PS and dragged it onto my second monitor. Using a Wacom Cintiq. Now every time I open PS, it just automatically opens on the tablet. I've tried to do this with AI. It doesn't appear to work. Is it just me, or is there a way to make this happen?
Also, working with latest version of AI on Mac with Yosemite.
Thanks in advance!
Jules

in the displays 'arrangement' part of system preferences you can define which monitor shows the menu (drag it in the little window to change it). this is a system wide setting so every app will have its menu on that window. it's not possible to have different apps with menus on different screens.
a solution is to learn all the key commands so you don't have refer to the meno often.

Program/Applications open on phantom second monitor

I used to have a second display connected to the iMac. After upgrading to Lion, I disconnected it as it does not really work in the full screen display with Lion. However, some of my programs that were on the second display still think its on that second display. Despite the fact that there is no second screen attached or configured in Displays control panel.
It is annoying because a program will be open, however, I cannot find the program (other than seeing the menu bar on the top). When I click in the Dock, under OPtions, and show program or move to this screen, then I see it (or when I go to Expose), but I can never drag it permanently to see it on the main screen.
Help!
Jonathan

After many days i found solution:
Run the client and get it set up the way you prefer, or Open your saved RDP file
On the Display tab, choose a non-fullscreen resolution.
On the General tab, click "delete these credentials", if possible.
Click Connect .
You will immediately get a local login dialog. Leave it blank and click
OK .
When you are connected and the remote login dialog appears, drag the window to the desired monitor.
On the remote login dialog, click Cancel . The settings dialog should reappear locally.
On the Display tab, you can now choose fullscreen.
You can now save your session with the Save button on the
General tab, as well as save your login credentials.
Try more times ,worked for me.

Open Images on second monitor by default

Though there are already quite a few threads on this issue
(e.g. here: http://forums.adobe.com/message/1648230#1648230; here: http://forums.adobe.com/thread/369630?start=60&tstart=0 ; and here: http://forums.adobe.com/thread/369928?start=15&tstart=0 );
the behaviour of Photoshop CS4 to always open images on the main monitor by default still wasn't changed with the 11.0.1-Update.
So my request is to simply reinvent the old behaviour all PS-Versions from (at least) PS 3.0 to CS3 had:
open images by default on the monitor THE USER has decided to use as his/her PS-monitor (and not automatically on the System main monitor).

Has this been fixed on Photoshop CS5?
I'll be sticking with CS3 until we get back what used to be default...
(bought CS4 Photoshop upgrade when it came out, went back to using CS3 after a while)

Firefox will not open can't open preferences or anything was responding slow earlier in the day had been closed with 2 tabs open when trying to open in the second tab it responded really slow so sut down and used Safari instead

this morning I had 2 tabs open was trying to open my bank web site and it seemed to respond really slow so closed firefox and opened Safari instead the site still responded slow but finally opened when I closed and went back to firefox it would not open can't re-install it or delete it or basically anything nothing is opening

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

How do I get InDesign to open on the second monitor of a two-monitor system?

My computer is connected to two identical monitors. I use them in extended mode. Monitor 1 includes my WIndows desktop; Monitor 2 does not
I want to open my InDesign files on "Monitor 2" which does NOT have impediments like a taskbar that wants to pop up.
By default, InDesign CS6 opens on Monitor 1, the one with the desktop. How do I change that setting?

Exactly what Bob Levine said. Can confirm, running a two monitor display here.

Lightroom 5.4 jumps to second monitor when attempting to edit an image in Photoshop CS 6.

Hello,
I have a brand-new HP z620 with an Nvidia Quadro K 4000 display adapter and apparently a software and/or hardware conflict.
I am experiencing an issue with Lightroom 5.4 window not working correctly with my second, not primary, monitor. When Lightroom is working on the second monitor and I need to edit an image in Photoshop cs6, I want Lightroom stay where it is and Photoshop to open on my primary monitor. And this has worked well for me on my previous system which was also a Windows 7 64-bit machine with an Nvidia GeForce GTX 570.
When I click the Lightroom option to "edit in Photoshop CS 6” The Lightroom window will move itself to the primary monitor for no apparent reason. This is the problem I am seeking to remedy.
No other external editing programs opened through LR behaves this way, such as NIK or OnOne Perfect Photo Suite, and I really need LR to stay on the second monitor on the extended desktop.
I’ve tried every monitor cabling setup I could think of to try and even unplugging the primary to make windows identify it as the 2 monitor in the screen resolution settings, but that does nothing for me. My new workstation is running the same OS version and a K4000. Monitors are currently connected to the display ports via dp to dvi adapters. I’ve already tried moving the connections around and plugging one into dvi, there doesn’t seem to be a setting I can change within windows or adobe to change this behavior.”
On a related note, I have similar instability in software made by X-rite that supports the use of a colorimeter allowing me to build profiles for monitors and evaluate colors precisely. During the profiling process I place the colorimeter in the designated place on the secondary monitor and direct the application to begin showing the colorimeter different colors on that monitor. At this point the colors jump to the primary monitor while the rest of the interface along with the colorimeter is a secondary monitor. I have a workaround that I'm using for this particular problem but I am fairly sure that the issue that causes the problem with Lightroom is also the source of my trouble here and I need to eliminate it.
thanks for your time,
Larry Garvey

Change the sort order. View->Sort

How do I set Firefox to open new windows in my second monitor?

When opening a new window (by right clicking a link and selecting Open in New Window), I would like the window to be opened in my second monitor. Firefox used to do this, but randomly stopped. Now when I open a new window it is opened in my primary monitor. It does not open maximized (just short of being completely maximized). I have tried the fix I used before- moving the un-maximized browser to the second window, closing and re-opening the window. I have also tried moving the un-maximized browser, maximizing, closing and re-opening. Does anyone know how I can restore Firefox to open my new window in the second monitor?
== This happened ==
Every time Firefox opened
== Randomly

Click the orange Firefox button, and click "Options". This will bring up a new window with a "Tabs" tab at the top. Click that. There will be several checked boxes, including one called "Open new windows in a new tab instead" up at the top of the list. Uncheck that box and you should be good to go.
ETA: This should also work if you click "Tools" and "Options" within your version.

How open Adobe Reader 9 in second monitor by default?

How can I make Adobe Reader 9.0 open always in my second monitor?
With version 8 it was at least possible to open the first document on the second monitor if I had moved the window in an previous session to that monitor and closed it there. The second and following documents always were opened in the first monitor (annoying!).
What I want is, that ALL documents always open in the second monitor. How can I manage this?

I am also having this issue.
First PDF opens on second monitor. Second one I open will open on main laptop monitor and 3,4,5 etc the same.
Would like it to default full screen on second monitor for all PDF's.

How to force Photoshop CC to open on Second Monitor in OS Mavericks?

Can anyone share light on why Photoshop CC refuses to open on a second monitor?

Do you really mean Photoshop 6 or Photoshop CS6? (Not that this should make a difference for the issue at hand.)
What is your OS version?
Have you tried trouble-shooting it (repairing permissions, purging PRAM, …)?

All dialogs open in second monitor

I recently installed a second monitor to my Toshiba laptop and I am using the extended desktop using the built-in NVIDIA video card. Because of performance problems not related to the second monitor, I had to reformat my internal hard disk.
After reinstalling LabVIEW 8.0.1 Development Suite on an external drive, I found that all the dialogs (those in LabVIEW, in my apps both compiled or run under labVIEW) opened on my second monitor. I checked the VI properties to make sure that the run-time window position was not set to the second monitor and I checked the NVIDIA video card settings to make sure that the dialogs were not set for the second monitor. I have no problem with any other applications such as Quicken.
I then uninstalled LabVIEW and reinstalled on my internal hard disk. The dialogs still open in the second monitor. Does anyone know how to fox this?

Is your front panel on monitor 1 (the one that you want the dialog to open on) or is it on monitor 2?? It seems that if you are using the default LabVIEW dialogs (in Dialog & User interface) it will open centered on your front panel.
If you create your own custom dialog box, go into the Run-Time position and under the Position drop down box select "custom" and it will automatically set it to the current position. (make sure that you have it on your first monitor already)
Kenny
Kenny

I have two monitors on my Mac. Running FF3.6.16 new windows now want to open on the wrong monitor. How do I get FF to open on the main display?

I have an eMac with a second display. I am running OS X 10.4.11 (Tiger) and Firefox 3.6.16. Everything was working fine until the other day I opened a second window in Firefox and dragged it to my secnd monitor. I later closed it. Since then all New Window requests, including when starting Firefox always open on the second monitor. How do I tell Firefox I want my main monitor has the primary monitor?

It has nothing to do with the Mac, but more with the software exporting the displays on the PC. A typical VNC server will generally only export the primary monitor.
What PC software are you using to export the display(s), and what Mac software are you using to view the PC displays? That may help someone come up with a workable solution for you (or not ).

How do I get firefox 4 on Windows 7 to 'remember' to open on monitor 2? It keeps opening on the main monitor, only.

When you open a program in a multi-monitor set-up and transfer the program to the second monitor and close it, when it next opens it should open on the second monitor. Firefox 3.x performed this way. Firefox 4 does not -- it only opens on the main monitors, always.
Please build this into the product or provide an option for it?
Thanks,

Update: I forgot something about the way BootCamp installs Windows...
I had temporarily turned off BlueTooth on OS X because I didn't need it, and when you do that, it effectively removes it from the system's list of devices.
So I just wiped the Windows partition, turned BT back on in OS X, and re-installed Windows. Just to make sure, I went through and manually installed all the drivers by hand and then let the BootCamp utility install them as well, and it's been working like a charm!

When Skype is open on my second monitor, my .swf runs slowly (30-45 fps).

Similar Messages

Maybe you are looking for