When Starting Itunes, Error Code 7 (Windows 14003)

I recently ressurected my computer from a Windows Update Issue. I run windows 7 64bit. I have tried using the support how-to's to resolve my issue. IE, uninstalling, restarting, reinstalling. All to no avail. Is there anything else I should be looking for?
One thing I noticed is that Quicktime is no where to be found on my computer. Tried to install it and then boot Itunes, but still got the same error.

Additional info: I run Windows Defender and Security Essentials for AV, Spy. I also run Malwarebytes once every two weeks.

Similar Messages

When starting iTunes I get a "Windows Configuring iTunes" window

Everytime when starting iTunes a Windows Installer window pops up and says "Please wait while Windows configures iTunes" while a bar at the bottom moves. It takes like 6 seconds to go away and then iTunes opens up. But if I open a song file from windows explorer iTunes boots right up. Also QuickTime gives me "Error 46: Could not load or find the QuickTime ActiveX control." when I try to run it. These happened after I upgraded to 7.2. Also something that might have had something to do with it, last week I had an icon tell me I needed to activate my windows vista even though I had already actvated vista around 2 months prior. So I got it activated again via windows tech support. I think something happened to my vista installation which caused vista to say it needed to be activated and also caused an alteration to my windows user account thus causing error 46 since it thinks it was installed on a different user account. I've tried uninstalling/reinstalling. I've created a new user and installed it on there but to no avail.
Please help

Hello midnite1,
Thank you for using Apple Support Communities!
I would recommend uninstalling iTunes altogether, and then installing the newest version from http://www.apple.com/itunes/download/
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Take care,
Sterling

Windows XP blue screen and 0x00000050 when starting ITunes up

when starting ITUNES after the upgrade to 7.3, I now get the blue screen of death.
Windows XP service pack 2 is installed
message is STOP: 0x00000050 (0xF8ac0000, 0x00000000, 0xF8ac0000, 0x00000000)
I have installed different video cards and removed my sound card from the system but problem still remains. I did change the QUICKTIME settings as suggested for Vista problems but problem still remains.
ITUNES will only run in SAFE MODE
help please... i miss my music

this is the information from the event log viewer. no files are referenced
Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 8/29/2007
Time: 2:21:22 PM
User: N/A
Computer: DAD_ASUS
Description:
Error code 10000050, parameter1 f79f0000, parameter2 00000000, parameter3 f79f0000, parameter4 00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 1000005
0020: 30 20 20 50 61 72 61 6d 0 Param
0028: 65 74 65 72 73 20 66 37 eters f7
0030: 39 66 30 30 30 30 2c 20 9f0000,
0038: 30 30 30 30 30 30 30 30 00000000
0040: 2c 20 66 37 39 66 30 30 , f79f00
0048: 30 30 2c 20 30 30 30 30 00, 0000
0050: 30 30 30 30 0000

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

Receive error when starting iTunes

Receive error when starting iTunes "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have with no success.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I am getting a error when starting Itunes 42110

I am getting a error when starting Itunes 42110

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

Error messages when starting iTunes - 11556 and other. Who may help?

Hi there,
When starting iTunes i get to the iTunes U store. Trying to connect to the normal iTunes store, I get the following error message:
"We could not complete your iTunes store request. The iTunes store is temporarly unavailable"
This message I get since about one week. Further I tried to sign in and then I get the following message:
"iTunes could not connect to the iTunes store. An unknown error occured (11556). Make sure your network connection is active and try again."
Network connection is working. iTunes connectivity diagnostics showed: all tests passed. I am using the latest version of iTunes (9.0.3.15). I tried to reinstall iTunes - did not help.
I hope, anybody can help me.
Regards,
kunzro

Hey Richard
After I posted here I realized it was in the Windows/iTunes board. I reposted in the OS X/iTunes board along with the solution.
I did more searching on Google and found that the store was disabled in parental controls in the iTunes Prefs. Go to iTunes prefs, click on Parental. See if iTunes store is disabled. I unchecked it and am all set. Someone mentioned that when iTunes is updated, this setting is the default.
Hope this helps.
Peter
Message was edited by: pmullen

An unknown error occured (-42110) when starting iTunes current version.

An unknown error occured (-42110) when starting iTunes current version on PC running Win 8 Pro x86. Tried to uninstall i''Tunes. But erratic behaviour when trying to install iTunes again. Get 2 choices, Repair or Delete. Choose Repair, but after some time I get the question: "Do I want to delete everythin in Itunes" Y/N. No matter if reply Y or N or close window, Installation program is terminated without any alterations (or so it says). What ?????

A repair uninstalls all program files prior to reinstalling them. So the message asking whether or not you want to do that just reflects what has always happened. A repair install (like a standard uninstall, followed by a reinstall) doesn't touch content files under normal circumstances.
If you think the wording is misleading, it's possible to give feedback directly to the Apple folks about it. Here's a link to the product feedback form for iTunes:
http://www.apple.com/feedback/itunesapp.html

How do I fix the "unknown error (-45054)" when starting iTunes?

When starting iTunes an "unknown error (-45054)" occurs and iTunes terminates. How do I fix this problem?

Might the error be -50?
See http://support.apple.com/kb/TS1583

TS1496 when updating iTunes to latest version windows error message appears

when updating iTunes to latest version windows error message appears

Okay.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I keep getting this error code 7 (windows error 126). can't open itunes, what do i do?

i keep getting this error code 7 (windows error 126). can't open itunes, what do i do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99703)

What does iTunes error code (-45054) mean? iTunes quits itself when you click on "OK"

iTunes error code (-45054) comes up when trying to download a M4b file to our computer to synch with an Ipad. We get this error code when we try to open this audiofile in iTunes and when we click on the OK button on the error code box, iTunes quits itself. Won't open without the error box showing: "An unknown error occurred (-45054)" and quits itself when you click on OK to close the error message box. Uninstall? How? Any ideas or suggestions?

Still have the same issue ? I have it too ! Trying to re install iTunes but the issue is always the same ! ??

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

ITunes 10.5 beta: Error -50 when starting iTunes

Hi all,
When i try to start iTunes from the dock i always get the error -50.
I'm also using OSX Lion 10.7 beta.
I have the same problem with iTunes 10.3, only 10.2 works fine, but i already updated my iPhone to iOS 5 beta, so i'm not able to use 10.2 anymore.
I've searched a lot of this problem on google and stuff but i only found solutions for this error while downloading a video or something else, but not when starting iTunes.
Please can someone help me?

If you are an authorized member of Apple's developer program, you have forums and resources through which you can address issues with seed versions of Apple's software. Posting here or in any public forum is a violation of your NDA with Apple. If you are not an authorized developer, then you have an illegal copy of the software.
Either way, we cannot help you with questions about unreleased Apple software in these forums.
Regards.

When Starting Itunes, Error Code 7 (Windows 14003)

Similar Messages

Maybe you are looking for